Leitch FR-6004 User Manual

For Service, please contact your local representative or:

Leitch Europe Leitch Inc. Leitch Asia
Holland Park House 111 Galway Place Unit 306B
Oldbury Teaneck, NJ 07666 HK Industrial Technology Centre
Bracknell, Berkshire USA 72 Tat Chee Avenue
ENGLAND Kowloon Tong
RG12 8TQ HONG KONG

Tel: [phone] [phone] [phone]
Fax: [phone] [phone] [phone]

All efforts have been made to ensure the accuracy of this manual. Should any errors be
noticed, please notify the above.

© Leitch Technology International Inc. 1999

The copyright in this document is the property of Leitch Technology International Inc and it may
not be copied, reproduced, used for manufacture, nor the contents divulged without the express
permission in writing of Leitch Technology International Inc.

All Rights Reserved.

FR-6004 USER MANUAL

4U RACK AND POWER SUPPLY

Warranty

This Leitch product is warranted against defects in materials and workmanship for a period of
one year from the date of invoice. During the warranty period, Leitch will, at its option, either
repair or replace products which prove to be defective.

The warranty shall not apply to defects resulting from improper or inadequate maintenance by
Buyer, Buyer-supplied software or interfacing, unauthorised modification or misuse, operation
outside of the environmental specifications for the product, or improper site preparation or
maintenance.

Safety Considerations

General

This product and related documentation must be reviewed for familiarisation with safety
markings and instructions before operation. This product has been designed and tested in
accordance with international standards.

Safety Symbols

Indicates hazardous voltages

Indicates earth (ground) terminal

The WARNING sign denotes a hazard. It calls attention

to a procedure, practice, or the like, which, if not performed or
adhered to, could result in personal injury. Do not proceed
beyond a WARNING sign until the indicated conditions are
fully understood and met.

The CAUTION sign denotes a hazard. It calls attention to

an operating procedure, practice, or the like, which if not
correctly performed or adhered to, could result in damage to
or destruction of part or all of the product. Do not proceed
beyond a CAUTION sign until the indicated conditions are
fully understood and met.

Safety Earth Ground

This is a Safety Class 1 product (provided with a protective earthing terminal). An
uninterruptible safety earth ground must be provided from the main power source to the product
input wiring terminals, power, cord, or supplied power cord set. Whenever it is likely that the
protection has been impaired, the product must be made inoperative and secured against any
unintended operation.

Before Applying Power

Verify that the product is configured to match the available main power source per the input
power configuration instructions provided in this manual.

Servicing

These servicing instructions are for use by qualified personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the Operating
Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.

Adjustments described in this manual may be performed with power supplied to the product
while protective covers are removed. Energy available at many points may, if contacted, result
in personal injury.

Capacitors inside this product may still be charged even when disconnected from their power
source. To avoid a fire hazard, only fuses with the required current rating and of the specified
type (normal blow, time delay, etc.) are to be used for replacement.