Leisure bay spas Hilo, Santo, Tonga, Celebrity Hilo, Celebrity Santo Owner's Manual
...
Hilo - Santo - Santo S - Tonga
SPA OWNER’S MANUAL
“Trend Setting Innovations Since 1973”
This Manual Contains
IMPORTANT SAFETY
INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
“SAVE THESE INSTRUCTIONS”
TABLE OF CONTENTS
SAFETY
IMPORTANT SPA SAFETY INSTRUCTIONS ................. 1, 2, 3
Important Safety Precautions .................................................. 2
Ground Fault Circuit Interrupter ............................................... 5
Safety Factors In Placement of Receptacle ............................ 5
SPA LOCATION
Selecting A Good Site .............................................................. 3
Site Load Bearing Requirements............................................. 3
Site Surface Requirements...................................................... 3
SPA WATER LEVELS
Filling Your Spa........................................................................ 4
Draining Your Spa ................................................................... 4
Winterizing Your Spa ............................................................... 4
HILO & SANTO EQUIPMENT
All Electrical Wiring Must be Installed By A Certified Licensed
Electrician
NEMA 5-20 amp Receptacle ................................................... 5
Isolated, Dedicated 120 volt, 20 amp Circuit ........................... 5
Ground Fault Circuit Interrupter Plug................................... 5, 6
Conversion, 120 volt to 240 volt .................................... 8, 9, 10
240 volt 40 amp Circuit ............................................................ 9
240 volt, 30 amp Circuit ........................................................... 9
Control Console ..................................................................... 13
Additional Features ............................................................... 15
Display Messages ................................................................. 16
HILO, SANTO, SANTO S AND TONGA
Cabinet Panels Installation / Removal ..................................... 7
SANTO S
All Electrical Wiring Must be Installed By A Certified Licensed
Electrician
Hard Wire Installation .............................................................11
Dip Switch Configuration ....................................................... 12
Control Console ..................................................................... 14
Additional Features ............................................................... 15
Display Messages ................................................................. 16
FILTERS
Skim Filter.............................................................................. 17
WATER PURIFICATION and MAINTENANCE
Recommended Schedule ...................................................... 18
pH .......................................................................................... 19
Total Alkalinity ........................................................................ 19
Calcium Hardness ................................................................. 19
Cleaning The Spa .................................................................. 19
Water Marks On Spa Shell .................................................... 19
Removing Tub Ring ............................................................... 19
Cleaning The Spa Cabinet .................................................... 19
AND TONGA EQUIPMENT
WARNING SIGN MUST BE POSTED
An important WARNING sign is packed with your Leisure Bay Spa. This sign must be
posted in a prominent place in close proximity to the spa installation site immediately
upon completion of spa installation.
!
DURING PREGNANCY, SOAKING IN HOT WATER MAY CAUSE DAMAGE TO THE FETUS.
LIMIT USE TO 10 MINUTES AT A TIME.
PREVENT DROWNING
SPA HEAT SPEEDS UP EFFECTS OF ALCOHOL,
DRUGS, OR MEDICINE AND CAN CAUSE
UNCONSCIOUSNESS.
IMMEDIATELY LEAVE SPA IF
UNCOMFORTABLE OR SLEEPY.
THIS WARNING SIGN MUST BE POSTED BEFORE THE SPA IS USED!
WARNING
PREVENT CHILD DROWNING
WATER ATTRACTS CHILDREN.
ALWAYS ATTACH A SPA COVER AFTER EACH
USE.
PL601035 Rev A
THIS SPA IS FOR RESIDENTIAL USE ONLY!
IMPORTANT SAFETY INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should always be followed, including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS
2. Warning
To reduce the risk of injury, do not permit children to use this product unless
they are closely supervised at all times.
3. A wire connector is provided on this unit to connect a minimum No. 8AWG
(8.4mm) solid copper conductor between this unit and any metal equipment,
metal enclosures of electrical equipment, metal water pipe, or conduit within
5 feet (1.5m) of the unit.
4. Danger Risk of Injury
(For cord and plug connected units)
A. Replace damaged cord immediately
B. Do not bury cord
C. Connect to a grounded, grounding type receptacle only.
4A. (For units with a G.F.C.I.)
WARNING - This product is provided with a Ground Fault Circuit Interrupter
“G.F.C.I.” on the end of the spa’s power cord. This G.F.C.I. must be tested
before each use. With the product operating depress the “test” button on
the G.F.C.I. The spa should not operate. Depress the “Reset” button on
the G.F.C.I. The product should now operate normally. If the spa fails to
operate in this manner, there is a ground current flowing indicating a possible
electric shock. Disconnect the power until the fault has been identified and
corrected by a certified licensed electrician.
5. Warning
FOR PERMANENTLY INSTALLED UNITS - The electrical supply for this
product must include a suitably rated switch or circuit breaker to open all
ungrounded supply conductors to comply with Section 442-20 of the
National Electric Code. ANSI / NFPA 70-1987. In addition, all 230 volt
installations must be protected by a 230 volt Ground Fault Circuit Interrupter
"G.F.C.I.". Any G.F.C.I. circuit breaker used in the house panel must read
current returning through the neutral conductor. 230 volt 2 conductor G.F.C.I.
circuit breakers will not operate correctly for your application.
6. Danger
Risk of Accidental Drowning. Extreme caution must be exercised to prevent
unauthorized access by children. To avoid accidents, ensure that children
cannot use this spa unless they are supervised at all times. For additional
protection, select a cover which is classified by the Underwriters
Laboratories Meeting ASTM F1346-91 requirements.
7. Danger
Risk of Injury. The suction fittings in this spa are sized to match the specific
water flow created by the pump. Should the need arise to replace the suction
fittings or the pump, be sure that the flow rates are compatible.
Never operate spa if suction fittings are broken or missing. Never replace
a suction fitting with one less than the flow rate marked on the original
suction fitting.
8. Danger
Risk of Electric Shock. Install at least 5 feet (1.5m) from all metal surfaces.
As an alternative, a spa may be installed within 5 feet (1.5m) of metal
surfaces if each metal surface is permanently connected by a minimum
No. 8AWG (8.4mm) solid copper conductor to the wire connector on the
terminal box that is provided for this purpose.
9. Danger
Risk of Electric Shock. Do not permit any electric appliance, such as light,
telephone, radio, or television, within 5 feet (1.5m) of a spa.
10. Warning To reduce risk of injury:
A. The water in a spa should never exceed 104°F (40°C). Water
temperatures between 100°F (38°C) and 104°F (40°C) are considered
safe for a healthy adult. Lower water temperatures are recommended
for your children and when spa use exceeds 10 minutes.
B. Since excessive water temperatures have high potential for fetal damage
during the early months of pregnancy, pregnant or possibly pregnant
women should limit spa water temperatures to 100°F (38°C).
C. Before entering spa, the user should measure the water temperature
with an accurate thermometer since the tolerance of water temperatureregulating devices vary.
D. The use of alcohol, drugs, or medication before or during spa use may
lead to unconsciousness with the possibility of drowning.
E. Persons suffering from obesity or with a medical history of heart disease,
low or high blood pressure, circulatory system problems, or diabetes
should consult a physician before using a spa.
F. Persons using medication should consult a physician before using a
spa since some medication may induce drowsiness while other
medication may affect heart rate, blood pressure, and circulation.
11.Warning Sign
Included with this spa is a warning sign. It is extremely important that this
sign be permanently placed in clear view of any persons using the spa.
Occasional spa users may not be aware of some of the dangers hot water
poses to pregnant women, small children, and people under the influence
of alcohol, drugs or medication. If you did not receive a warning sign or
your sign has become damaged, please contact your spa dealer and ask
for sign number PL601035 Rev A.
SAVE THESE INSTRUCTIONS
1
IMPORTANT SAFETY PRECAUTIONS
Your spa can be a source of great pleasure. It offers healthful stimulating recreation and is a delightful fun
center for you, your family and friends. However, it contains large quantities of water and is deep enough to
present inherent dangers to life and health unless the following safety rules are strictly observed.
1. Never permit the spa to be used unless it is attended
5. Hot water can raise the body temperature high
by at least one person other than the bather.
Someone should be present to lend assistance if the bather should be in
trouble due to injuries, cramps, drowning especially in case of children,
etc.
2. Always use care in and around your spa.
The spa has many rigid, unyielding parts and many areas that become wet
and slippery. These all are potentially dangerous when rough play is
permitted or if care is not used, particularly when entering or leaving the
spa.
6. Prolonged immersion in hot water may induce
3. Keep the water sanitary and healthful at all times.
Your filter system will remove suspended particles from the water. Regular
application of spa chemicals in proper quantities will destroy harmful bacteria
and prevent formation of algae. Your surface skimmer will remove insects,
leaves, and other debris from the water surface. Unsanitary water is a
serious health hazard.
7. WARNING-The use of alcohol, drugs or medication
4. The water in your spa should NOT be warmer than
100°F - 104°F (38° - 40°C).
Always keep an accurate thermometer in the water because your spa’s
thermostat may be in error. Use a high quality, shatterproof thermometer
with increments of one degree or less.
The National Spa and Pool Institute considers a temperature of 100°F
(38°C) safe and comfortable for a healthy adult. Most healthy adults can
enjoy this water temperature for as long as desired, although it may raise
the body temperature to the water temperature and eventually become
uncomfortable (like a fever). At higher water temperatures the soaking
time should be shorter. Never soak for more than 20 minutes when the
water temperature is 102°F (39°C) or higher. If you are planning a long
rest in the spa, lower the water temperature closer to normal body
temperature, about 99°F (37.2°C). Some people find even lower water
temperatures relaxing and pleasing. Try different water temperatures in
the 98°-102°F (36.6°-39°C) range until you find what temperatures suit
you best.
enough to cause heat stroke.
This can be fatal even to healthy adults. If you have any questions about
your own fitness or whether you should soak in the spa, check with your
physician.
hyperthermia.
Hyperthermia occurs when internal body temperature reaches a level
several degrees above the normal body temperature of 98.6°F (36.6°C).
The symptoms of hyperthermia include: (1) dizziness, (2) fainting, (3)
drowsiness, (4) lethargy and (5) increase in the internal body temperature.
The effects of hyperthermia include: (1) unawareness of impending hazard,
(2) failure to perceive heat, (3) failure to recognize the need to exit spa, (4)
physical inability to exit spa and (5) unconsciousness resulting in danger
of drowning.
can greatly increase the risk of fatal hyperthermia
in hot tubs or spas.
Despite the popular image of people in spas drinking wine or other alcoholic
beverages, DO NOT use alcoholic beverages before or during spa use.
Alcohol and certain drugs and medications, are depressants which cause
slowed reflexes and drowsiness, especially in conjunction with the relaxed
soaking in hot water. This can lead to sleep or unconsciousness and possibly
result in drowning. Using your spa with other people who are also drinking
or under the influence of drugs or medications is not a preventative measure
since they are likely to become similarly affected by the combinations of
alcohol, drugs or medication and hot water soaking.
Soaking in hot water causes changes in the circulatory system, such as
enlargement of blood vessels near the skin. Therefore, people with a
medical history of heart disease, circulatory problems, diabetes, low or
high blood pressure should check with their physician before using spas.
Additionally, people taking medications causing drowsiness, such as
tranquilizers, narcotics, antihistamines, or anticoagulants should not use
spas without asking their physician.
DO NOT :
Do not use electrical appliances in or around your spa. Do not use glass or other breakable items in or around your
spa. Do not remove spa cabinet panels and attempt to make repairs. Do not attempt electrical repairs. Retain a
certified licensed electrician.
SAVE THESE INSTRUCTIONS
8. Broken or missing drain covers should be replaced
immediately.
Accidents can occur when long hair or a body part is trapped by suction
from a drain or outlet whose cover is broken or removed. Children are
particularly vulnerable, and they should be warned against danger.
2
Selecting A Good Location
Site Selection...
Your new spa will provide you and yours with hour upon hour of healthy, relaxing enjoyment. The following suggestions and
recommendations will help you select a safe and compatible site for your spa, maximizing your enjoyment.
READ ALL SAFETY INSTRUCTIONS!
See pages 1 and 2 for other safety requirements and instructions
1. Certified Licensed Electrician Required
Electrical installation, (approval of and connection to power source) must
be completed by a qualified certified licensed electrician in compliance
with all codes.
2. No Overhead Power Lines
Do not locate your spa under overhead power lines or in near proximity to
existing buried or exposed electrical circuits. See your certified licensed
electrician.
3. Childproof Your Spa
Plan for limiting access of children. Precautions such as self closing and
locking gates or access doors, fencing and other child barriers, as dictated
by the site would be recommended.
4. UL Safety Cover Required
In addition to its insulating factors, a good cover also provides a measure
of additional protection from unwanted access. Select a cover which is
classified by the Underwriters Laboratories meeting ASTM F1346-91
requirements.
LEVEL, FLAT & SOLID LOAD BEARING SITE CRITICAL
Solid Load Bearing Site
The site must provide a solid foundation with a minimum load bearing capacity
of 135 pounds per square foot (61.23 kgr per 929.03 sq. cm). Concrete slabs
and decks must be designed to support this weight. Do not select a site composed
of individual unsupported bricks, blocks or other materials which will shift unevenly
and cause damage to your spa’s internal frame.
Level Site, Flat Surface
A level site is critical to both the performance and enjoyment of your spa. Water
is unforgiving and will always settle level. A flat and level site provides the surface
necessary to properly disperse weight between the footwell which bears most of
the spa’s weight and the structural frame which primarily provides stabilization
and secondary support. The importance of proper support for the footwell in
conjunction with the spa cabinet cannot be over stressed.
THE BULK OF YOUR SPA’S WEIGHT IS SUPPORTED BY THE FOOTWELL
Failure to provide support will result in damage to the spa’s shell and will void the shell warranty!
15%
WEIGHT
LOAD
Solid, Level, Flat Surface Capable of Supporting 135 Pounds Per Sq. Ft.
70% OF THE SPA’S WEIGHT LOAD
15%
WEIGHT
LOAD
3
WARNING: DO NOT SUPPLY POWER TO AN EMPTY SPA!
FILLING YOUR SPA
Filling your spa is the first step in maintaining water quality
and chemical balance. Use only clear, uncontaminated
potable water when filling the spa.
When Filling the spa open all jets and air controls.
Water Level
The correct water fill level varies with each individual
installation. Every person entering a spa displaces a given
volume of water.
Suggested “Fill Range” Provided
A fill range label has been placed on the surface skimmer
face plate at the factory (see fig. 1). This label has a
suggested minimum and maximum fill level that will provide
a starting point for selecting a water level that meets your
individual needs.
Chemically Treat Water Immediately
To assure the maintenance of water quality, it is imperative
that you chemically threat the spa water immediately upon
completion of filling. See the treatment sections on pages
18 and 19.
fig. 1
Warning: Allowing the spa water to freeze will cause severe
damage to the spa shell, equipment, and plumbing.
A spa can be a great asset to your health and relaxation during the
winter months. However, for those who will be using a spa in freezing
cold weather it is critical that a water temperature be maintained well
above freezing.
Freeze Protection
Your Leisure Bay spa is equipped with a special feature called freeze
protection. If the high limit sensor detects 40°F (4°C) at the heater, then
all the equipment is automatically activated to provide freeze protection.
This equipment stays on until the sensor detects 45°F (7°C) at the heater.
WARNING: We strongly recommend that you inspect and test your spa
and controls on a daily basis during periods when temperatures are
below 32°F (0°C). Every installation is different and many factors
contribute to possible freeze damage situations; rate of temperature drop,
thermal cover insulating properties, thermal cover installation, spa
installation location, wind exposure, power outage, spa water temp., etc.
The spa’s freeze protection system is designed to protect your spa from
unforeseen freeze situations. However, in severe freeze conditions or if
you do not plan to use your spa for a period of time, it may be impossible
for the freeze protect system to fully protect your spa. When severe
conditions threaten, we strongly recommend that you have the unit
drained and winterized by a “Spa Professional.” Properly winterizing a
spa is a complicated process and should not be attempted by an amateur.
WINTERIZING YOUR SPA
DRAINING YOUR SPA
(Warning: Do not supply power to an empty spa!)
1. Turn Power Off
Turn power off at the spa consoles and deactivate disconnect
switches at the G.F.C.I. plug or load center.
2. Locate Spa Drain Valve
Located under the lower corner of the spa as you are facing the
console. See arrow.
PUSH PULL
TURN
T
O CLOSE
Figure 1 Figure 2
TURN
TO OPEN
Drain Every Three Months
Draining your spa on a regular basis rids the spa of dissolved solids and
protects your spa equipment from the effects of residual calcium hardness
and total alkalinity problems.
3. Remove Drain Valve Safety Cap
Remove safety drain cap (see figure 1) and store for use when refilling
your spa. Attach a standard garden hose to the drain valve.
4. Attach Hose & Select Safe Suitable Drain
Route the hose to a sewer drain capable of safely assimilating 300 plus
gallons of water which may contain both unsanitary contaminants and
chemical residue. To open drain valve twist counter clockwise and pull
(see figure 2).
CAUTION: Drain waste water may contain chemical residue and unsanitary contaminants which
could be a hazard to health or the environment. Drain to specified sanitary sewer only.
4
ELECTRICAL DATA FOR THE USE OF CERTIFIED LICENSED ELECTRICIAN
WARNING: Shock Hazard! Under No Circumstances Should This Spa Be Installed By Anyone
Other Than A Certified Licensed Electrician!
All wiring MUST be in accordance with the National Electrical Code and all local codes.
HILO AND SANTO CONVERTIBLE EQUIPMENT PACKAGE
This convertible equipment pack is designed to accept either
120 or 240 volt power input.
Your spa has a factory installed 120 volt power cord with a G.F.C.I. 20 amp configured plug connector
designed for use with a NEMA 5-20R receptacle. See below for further details. Conversion from the
standard 120 volt cord connection to a 240 volt hard wire connection must be completed by a certified
licensed electrician in accordance with the National Electrical Code and all local codes.
Ground fault interrupter plug & power cord
fished through arched corner of the spa
A G.F.C.I. MUST BE A INTEGRAL PART OF THE CONNECTION
The National Electrical Code requires that both 120 and 240 volt circuits be protected by a Ground
Fault Circuit Interrupter "G.F.C.I." and a Disconnect Switch: See National Electric Code Article 680-42
& 680-12
WARNING:
THIS G.F.C.I. PLUG PROVIDES GROUND FAULT PROTECTION FOR THE SPA
AND SHOULD NEVER BE REMOVED, ALTERED OR DISABLED FOR ANY
REASON!
This G.F.C.I. plug has one vertical and one horizontal blade in addition to a grounding prong. This plug
configuration is to be plugged into a like receptacle.
be modified.
Under no circumstance should this configuration
A NEMA 5-20R 20 AMP RECEPTACLE IS REQUIRED
A NEMA 5-20 amp receptacle is required for a power cord installation. This receptacle must be installed
in accordance with the National Electrical Code and all local codes.
NEMA 5-20 20 amp Receptacle
ISOLATED, DEDICATED 120 VOLT, 20 AMP CIRCUIT IS REQUIRED
All 120 volt installations require an isolated, dedicated 120 volt circuit to provide the power necessary
for the proper operation of the electrical equipment.
SAFETY FACTORS IN PLACEMENT OF THE 20 AMP RECEPTACLE
Special consideration should be given to safety when selecting a location for the 20 amp receptacle.
The receptacle should be placed no closer than six (6) feet (1.8m) from the spa and in such a manner
as to be out of the way of traffic to and from the spa and normal foot traffic. The power cord should be
situated so it will not cause any other type of hazard.
WIRE SIZING MUST MEET ELECTRICAL CODES
All installations are different. Wire sizing must meet the National Electrical Code and all local code
specifications.
W ARNING: USE COPPER CONDUCTORS ONLY!
G.F.C.I. Equipped Plug
Load Center
5
GROUND FAULT CIRCUIT INTERRUPTER
Your Leisure Bay Spa has a factory mounted power cord which is equipped with a Ground Fault
Circuit Interrupter “G.F.C.I.” built within the plug housing.
The G.F.C.I. has two mode buttons. The first is labeled “Test.” This button has a dual function. First it
acts as a disconnect switch. Depress this button and power to the spa is disconnected. The same
action is preformed to test the G.F.C.I. circuit.
The second button labeled “Reset” also has two functions. The “Reset” button is also the connect
(on) switch. Depressing the “Reset” button returns power to the spa equipment. This same button is
used to “Reset” the G.F.C.I. during a test cycle. See page 1 number 4A.
Should a G.F.C.I. circuit test fail immediately disconnect the power plug and contact a
certified licensed electrician to diagnose and correct the problem.
6
Loading...