Leister Vulcan E Operating Instructions Manual
• The LEISTER hot air blower Vulcan «E» is suitable for building into machines,
installations and appliances and is designed for continuous operation.
• Drying and heating processes of various types.
• Heating conveyor ovens or heat tunnels.
• De-icing the runway of a crane and sewage works as well as surface areas,
joints, rails and cables etc.
• Speeding up mixing processes and dissolving foams which can arise during
mixing and filling containers.
• Sterilizing of packaging materials such as bottles, corks and containers.
• Activating and loosening solvent free adhesives and melt adhesives.
• Separating and fusing synthetic fibres and fabrics.
• Shrinking of heat-shrink sleeves, films, tapes, solder sleeves and moulded
parts.
• Soldering copper pipes, solder joints and metal foils.
• Removing plastic mould flash and putting a shine on plastic surfaces.
• Welding of thermoplastic materials.
• Igniting wood shavings, paper, coal or straw in furnaces.
APPLICATION
1
LEISTER Vulcan E
High Pressure Hot Air Blower
Please read operating instructions carefully before use
and keep for further reference.
GB
OPERATING INSTRUCTIONS
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen/ Switzerland
Tel. +41 41 662 74 74 Fax + 41 41 662 74 16
www.leister.com sales@leister.com
®
Официальные поставки www.mikst.ru
Voltage V~
Capacity W
Temperature °C
Frequency Hz
Air flow l/min.
(20°C)
Air pressure Pa
Noise level dB (A)
Weight kg
Size mm
2
TECHNICAL DATA
3x220–230 3x380–440
10 10 –13,5
650 650
50 / 60 50 / 60
850 / 1500 950 / 1700
3100 / 4000
65
9.3
384x254x231
1 mbar = 100 Pa
The tool is CCA certificated (Cenelic Certification Agreement).
TEST SIGNS
WARNING
CAUTION
230
400
Danger! Unplug the tool before opening it, as live compo-
nents and connections are exposed.
Incorrect use of hot air tools can present a fire and explosion
hazard, particularly in the proximity of flammable materials
and explosive gases.
Danger of getting burned! Do not touch the heater tube and
nozzle when they are hot. Let the tool cool down. Do not
point the hot air flow in the direction of people or animals.
The tool must be operated under supervision.
Heat can ignite flammable materials which are not in view.
For personal protection, we strongly recommend the tool to
be connected to an RCCB (Residual Current Circuit Breaker)
before using it on construction sites.
The rated voltage stated on the tool must correspond with
the mains voltage.
Protect the tool from damp and wet.
FI
Официальные поставки www.mikst.ru
Loading...