Leister ASO Operating Instructions Manual
1
LEISTER ASO
Medium Pressure Blower
Please read operating instructions carefully before use
and keep for further reference.
GB
OPERATING INSTRUCTIONS
• The LEISTER Blower ASO is suitable for building into machines, installations
and appliances and is designed for maintenance-free continuous operation.
• It is suitable for delivering air, non combustible, non corrosive and non
explosive gases.
• Air supply for LEISTER Hot Air tools, for intake air supply and for cooling.
• Ventilation of tanks, aquariums and different applications for textile ma-
chines.
• Drawing off of welding gases and fumes.
• Transfer of granular and loose materials.
• Vacuuming screen printing machines and air tables.
APPLICATION
®
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen/Switzerland
Tel. +41 41 662 74 74 Fax + 41 41 662 74 16
www.leister.com sales@leister.com
2
Danger! When opening up the tool live connections
are exposed. Therefore, before opening it, disconnect all poles from the mains.
The tool must be grounded with the protective conductor.
The voltage rating stated on the tool should correspond to the mains voltage.
Protect tool from damp and wet.
Use thermal overload protection switch.
Pay attention to the direction of rotation.
230
400
Design
Voltage for three-phase supply V~
Voltage for single phase supply V~
Condensor for single phase mF
Capacity W
Frequency Hz
Air flow l/min.
Static pressure Pa
Noise level dB (A)
Environmental protection DIN 40050
Diameter of air intake (external Ø) mm
Diameter of air outlet (external Ø) mm
Ambient temperature °C
Weight kg
Size (L x B x H) mm
radial blower
3 x 230 – 254 3 x 380 – 440
1 x 230 – 254
25
550
50 / 60
13500 / 15900
1600 / 2400
70
IP 54
134
90
<60
15,0
357 x 387 x 368
WARNING
CAUTION
TECHNICAL DATA
100 Pa = 1 mbar
Loading...