Leicke Sharon LH67402 User Manual

User's Manual

LEICKE Sharon Blood Pressure Monitor

with Bluetooth

Product number: LH67402

Thank you for purchasing the Blood Pressure Monitor from LEICKE Sharon.

We continuously work on the development of our products, our customer support and
innovations. Our products have a long service life, are eco-friendly and high performing.
Furthermore, every day we do our very best to satisfy you as our customer. That is why
you, no matter if private or business customer, are in the focus of our company’s efforts.
We take your reviews and proposals seriously and evaluate them continuously. That way,
we get to know you and your demands on our products and services better and thus
allow for positive enhancements.

To discover more about LEICKE products or if you have any questions about this product

visit our website www.leicke.com.

PACKAGE CONTENTS

Before attempting to use this device, please check the packaging and make sure the
following items are contained in the package:

Number of

Pieces

Name

Note

1

Blood Pressure Monitor (USB
interface)

Bluetooth 4.0

2

USB Cable

-

1

User's Manual

-

TECHNICAL DETAILS

Input voltage

USB, 5V

Input current

60mA

Measurement mode

Oscillographic testing mode

Measurement range

Rated cuff pressure:
0mmHg-300mmHg(0kPa-40kPa)
Measurement pressure: 40mmHg-230mmHg
( 5.3kPa-30.7kPa )
pulse value:(40-199)beat/minute

Accuracy

Pressure:
5°C – 40°C within ± 3mmHg (0.4kPa)
pulse value: ±5%

Normal working condition

Temperature: 5°C to 40°C
Relative humidity: ≤ 85%RH
Atmospheric pressure: 86kPa to 106kPa

Storage & transportation
condition

Temperature: -20°C to 60°C
Relative humidity: 10%RH to 93%RH
Atmospheric pressure: 50kPa to 106kPa

Degree of protection

Type BF applied part

Protection against
ingress of water

IP22
Software version

V01

Device classification

Battery Powered Mode:
Internally Powered ME Equipment
AC Adaptor charged Mode:
Class II ME Equipment

RF Frequency Range

2402 MHz to 2480 MHz

Transmitting Distance

10 m

Weight

108 g

Dimensions

Size: 79.8 mm x 72.5 mm x 13.2 mm

PRODUCT INFORMATION

The device features blood pressure measurement, pulse rate measurement and the
result storage. Readings taken by this device are equivalent to those obtained by a
trained observer using the cuff and stethoscope auscultation method.
This manual contains important safety and care information, and provides step by step
instructions for using the product.
Please do read this user manual carefully and thoroughly before use.

FEATURES:

 Systolic Blood Pressure
 Diastolic Blood Pressure
 Pulse Rate
 Memory: Up to 60 pieces of records

MEASUREMENT PRINCIPLE

This product uses the Oscillometric Measuring Method to detect blood pressure.

Before every measurement, the unit establishes a “zero point” equivalent to the

atmospheric pressure. Then it starts inflating the cuff. Meanwhile, the unit detects
pressure oscillation generated by beat-to-beat pulsatile, which is used to determine the
systolic pressure and diastolic pressure as well as pulse rate.
The device also compares the longest and the shortest intervals of detected pulse wave
with the average value, and then calculates the standard deviation.
The monitor will light up a warning symbol when the calculated standard deviation
is larger than or equal to 15.

SAFETY INFORMATION

The signs below might be in the user manual, labelling or other components.
They are the requirement of standard and using.

Symbol for “THE OPERATION
GUIDE MUST BE READ”

Symbol for “TYPE BF APPLIED
PARTS”

Symbol for “COMPLIES WITH

MDD 93/42/EEC

REQUIREMENTS”

Symbol for “ENVIRONMENT

PROTECTION - Electrical waste
products should not be disposed
of with household waste. Please
recycle where facilities exist.
Check with your local authority or

retailer for recycling advice”

Symbol for “MANUFACTURER”
Symbol for “SERIAL NUMBER”

Symbol for “DIRECT CURRENT”

Symbol for “Including RF
transmitter”

Symbol for “Authorised

Representative in the European

Community”

Caution: These notes must be
observed to prevent any damage
to the device.

Symbol for “MANUFACTURE
DATE”

INDICATIONS FOR USE

The LEICKE Sharon Blood Pressure Monitor is a digital monitor intended for
measuring blood pressure and heartbeat rate with wrist circumferences ranging
from 13.5 cm to 21.5 cm ( about 5¼ inches to 8½ inches ).
It is intended for adult indoor use only.

CAUTION:

* Intended for adult indoor use only. Pregnant women, neonatal patients, pre-eclamptic patients and
patients with severe obesity must not use the device. If in need, please consult a professional doctor.
* Intended for non-invasive measuring and monitoring of arterial blood pressure. Not intended for use
on extremities other than wrist or for functions other than obtaining a blood pressure measurement.
* Please use device under user manual specified environment, otherwise accuracy
may be influenced.
* Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood
pressure. Do not start or end medical treatment without asking a physician for treatment advice.
* If you are taking medication, consult your physician to determine the most appropriate time for your

measurement. Never change a prescribed medication without your physician’s consent.
* If the cuff’s pressure exceeds 40 kPa (300 mmHg), the unit will automatically deflate.
If the cuff doesn’t deflate when its pressure exceeds 40 kPa (300 mmHg), detach cuff from wrist and

press the START/STOP button to stop inflation.
* Do not use the monitor under a strong electromagnetic field (e.g. medical RF equipment) that
radiates interference signals or electrical fast transient/ burst signals.
* The maximum temperature of the device is 42.5°C the environmental temperature being 40°C.
* The device is not AP/APG equipment. It is not suitable for use in the presence of a flammable
anaesthetic mixture with air (or oxygen, nitrous oxide).
* Please keep the unit out of reach of infants, children or pets, since inhalation or swallowing of small
parts is dangerous or even fatal.
* Please use ACCESSORIES and detachable parts specified / authorised by MANUFACTURER.
Otherwise, it may cause damage to the unit or endanger the user / patient.
* The patient is an intended operator. The patient can measure, transmit data and charge battery
under normal circumstances and maintain the device and its accessories according to the user
manual.
* The blood pressure monitor, its adaptor, and the cuff are suitable for use within the patient's
environment. If you are allergic to dacron or plastic, please don’t use this device.
* The device is not intended for PATIENT transport outside a healthcare facility.
* This device cannot be used with HF surgical equipment at the same time.
* There is a PTC current limiter in the monitor, whose specification is 8V and 0.5A. When the voltage
and current exceed the limiting value, the monitor will stop working.
* The adaptor is specified as a part of ME equipment.
* The device is not suitable for public use.
* The adapter insulates the device from the main supply. Do not position the plug in a position where it
is difficult to disconnect from the supply mains.
* Sensitive people, including pregnant women pre-eclamptic patients, patients who implanted medical
electronic instruments and have atrial fibrillation (AF), premature ventricular beats and peripheral
arterial disease (PAD)., should avoid using the unit whenever possible.
* This unit is not suitable for continuous monitoring during medical emergencies or operations.
* Manufacturer will make available on request circuit diagrams, component parts list etc.

LCD DISPLAY SIGNAL

SYMBOL

DESCRIPTION

EXPLANATION

SYS

Systolic Blood Pressure

High blood pressure

DIA

Diastolic
Blood Pressure

High blood pressure
Pulse

Beat/minute

Low Battery

Low battery - please charge

mmHg

Unit

Measurement unit of blood pressure
(1mmHg=0.133kPa)

IHB Detector

Irregular Heartbeat Detector

Bluetooth

Successful Bluetooth Connection

Error

Error

Memory

Recalling the history records

Time

Hour: Minute (Month/Day/Year)

Heartbeat

Heartbeat detection during the
measurement

Monitor Components

SYSTOLIC

DIASTOLIC

PULSE RATE

TIME

MEM/UP START/STOP BUTTON

BUTTON

SET/DOWN

BUTTON

Component list of
pressure measuring system:

CUFF

(Type BF applied part)

1. PCBA

2. Air Pipe

3. Pump

4. Valve

5. Cuff

USB Interface

Charging the Device

1. The battery of the monitor is a built-in rechargeable lithium-ion battery, the battery

current is 420 mAh.

2. Please use the USB cable to charge the battery, just like the following pictures:

Method 1 Method 2

Charging the power under following circumstances:

• displays on the LCD

• The LCD display dims

• When switching on the monitor, the LCD doesn’t light up.

CAUTION:

1. The battery of the monitor is built-in rechargeable lithium-ion battery, please do not disassemble
yourself or by unauthorized maintenance personnel.

2. When used normally, it can be charged about 300 times, if the battery cannot be charged normally
or the blood pressure monitor cannot be used normally, please contact authorized maintenance
personnel. If you measure three times per day, and the battery was fully charged, it can be used for
about 20 days.

3. Store and use the blood pressure monitor in a cool, dry and ventilated environment. Avoid fire and
heat sources, or the battery may explode.

4. Only use the authorized USB cable (5V 1A) to charge power.

5. During the charging process, the blood pressure monitor displays:

When charging is finished, please pull the plug in time.

CAUTION:

6. When charging, do not touch charging connector and patient simultaneously.

7. Do not attempt to replace your blood pressure monitor’s battery. It is built-in and not changeable.

8. Only charge the battery in accordance with the user instructions supplied with the blood pressure
monitor.

9. Avoid charging your blood pressure monitor in extremely high or low temperatures.

10. Do not use your blood pressure monitor while you are charging it.

11. Do not attempt to disassemble the blood pressure monitor or force open the built-in battery.

12. Do not clean the blood pressure monitor when it is being charged. Always
unplug the charger first before cleaning the blood pressure monitor.

13. Do not dispose of your blood pressure monitor in a fire. The battery could explode causing injury
or death.

14. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.

Activate Your Blood Pressure Monitor

Getting the Blood Pressure Monitor, the first thing to do after charging is to activate
it. Please press and hold the SET button to activate it and enter setting mode.