Leicke Sharon DJ Roxx Big Woody User Manual

User's Manual

Bluetooth Speaker with radio and MP3 player

Product number: EP18108

PACKAGE CONTENTS

Before attempting to use this device, please check the packaging and make sure

the following items are contained in the package:

Number

of Pieces

Name Note

1 Bluetooth speaker integrated battery

1 charging cable Micro USB

1 AUX cable 3.5 mm // 3.5 mm

1 user's manual -

TECHNICAL DETAILS

Bluetooth version 2.1, up to 10m range

Capacity of integrated battery 1200 mAh

Power supply 5V / 1A

Maximum output 5 Watt, 0.5%THD @ 1kHz

AUX input resistance 20kΩ

Frequenzband 2402 MHz

Max. Sendeleistung 2,08 mW / 3,18 dBm

Maximum play time 6-8h, depending on volume and genre

Supported audio formats MP3

Supported memory cards TF / MicroSD up to 32Gbyte

Power supply USB 5V / 1A

Size (LxWxH) 136 x 76 x 46.5 mm

Weight 260 g

GETTING STARTED

Step 1: To switch the device on, just move the slide switch at the back of the

device to the "ON" position.

Step 2: After switching on, the device will be in Bluetooth mode (signal tone

sequence). To activate pairing, short press Play/Pause button. Now pair it with your

smartphone or tablet. If a memory card is inserted, the speaker automatically

switches to MP3 player mode. To activate radio mode, press Play/Pause for about

3 seconds.

Step 3: Volume can be controlled through turning the knob at the front.

Step 4: Short press the forward and backward button to switch songs or radio

channels depending on the mode the device is in. Station scanning will be activated

by short pressing Play/Pause while in radio mode and can be interrupted by

pressing a single button.

Step 5: Incoming phone calls can be taken by short pressing the multifunctional

button (MFB). The calls can also be ended by pressing the MFB. The integrated

microphone enables hands-free calls with the speaker.

Step 6: Switch the device off by using the slide switch at the side of the device.

Note: Before attempting to use the device for the first time, please charge the

Battery for at least two hours. Like this the maximum life span will be ensured.

ESTABLISHING THE BLUETOOTH CONNECTION

Step 1: Switch the music box on. To use the Bluetooth function, NO memory card

must be used.