LEICKE Bluetooth Speaker with radio and MP3 player User Manual

User's Manual

Bluetooth Speaker with radio and MP3 player

Product number: EP18105/7

PACKAGE CONTENTS

Before attempting to use this device, please check the packaging and make sure

the following items are contained in the package:

Number

of Pieces

1 Bluetooth speaker integrated battery

1 charging cable micro USB

1 AUX cable 3.5 mm // 3.5 mm

1 user's manual -

Bluetooth version V 4.0, up to 10 m range

Pairing mechanism NFC or manual

Capacity of integrated battery 1500 mAh

Maximum output 2x5 Watts

Loudspeaker system Stereo, two-way, 2 x 1.5“ with Bass-

Name Note

TECHNICAL DETAILS

Boost

Maximum playtime 5-6h, depending on volume and genre

Frequenzband 2402 MHz

Max. Sendeleistung 2,68 dBm

Supported audio formats MP3, WMA files

Supported memory cards TF / MicroSD up to 32 Gbyte

Power supply USB 5V / 500 mA

Size (LxWxH) 68 x 68 x 181 mm

Weight 405 g

GETTING STARTED

Step 1: To switch the device on, press and hold the power button for 3 seconds.

When switched on, the device will give acoustic feedback.

Step 2: After switching on, the device will be in Bluetooth mode (“Bluetooth mode

has been on”). You can switch between Bluetooth, radio, line-in or MP3 player

operation by pressing the mode button “M” shortly. If the speaker has been

connected to a phone during prior usage, the connection will be automatically

established in Bluetooth mode.

Step 3: Volume is controlled in all modes of operation by long pressing the forward

(+) or backward (-) button for more than 2 seconds.

Step 4: Short press the forward and backward button to switch songs or radio

channels depending on the mode the device is in.

Step 6: Switch the device off by pressing the power button for 3 seconds. The

device will respond by playing a two-tone sequence.

Note: Before attempting to use the device for the first time, please charge the

battery for at least two hours. Thereby the maximum life span will be ensured.

ESTABLISHING THE BLUETOOTH CONNECTION

Step 1: Switch the speaker on. Wait until you hear the acoustic response “Bluetooth

mode has been on” from the device. During pairing, the status LED will blink fast.

Step 2: Open the settings menu of your device and look for the Bluetooth option.

This must be activated. In the list of found devices you will now find "Bamboo

BT008". Connect. If a code is to be entered, please enter "0000". If your phone is

NFC-enabled and NFC as well as Bluetooth are activated, you can connect simply