Leica DISTOTM D3a
The original laser distance meter
User Manual |
|
English |
|
Congratulations on the purchase of your |
|
Leica DISTO™ D3a . |
|
Carefully read the Safety Instruc- |
|
tions and the User Manual before |
|
using this product. |
|
The person responsible for the instrument must |
|
ensure that all users understand these directions and |
|
adhere to them. |
|
Contents |
|
Safety Instructions ............................................. |
1 |
Start-up................................................................ |
6 |
Menu functions................................................... |
9 |
Operation........................................................... |
11 |
Measuring .......................................................... |
12 |
Functions........................................................... |
14 |
Appendix............................................................ |
20 |
Safety Instructions
GB
Symbols used
The symbols used in the Safety Instructions have the following meanings:
WARNING:
Indicates a potentially hazardous situation or an unintended use which, if not avoided, will result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in minor injury and/or in appreciable material, financial and environmental damage.
) Important paragraphs which must be adhered to in practice as they enabled the product to be used in a technically correct and efficient manner.
Use of the instrument
Permitted use
•Measuring distances
•Computing functions, e. g. areas and volumes
•Measuring tilts
Leica DISTO™ D3a 776175a gb |
1 |
Safety Instructions |
|
|
|
|
Prohibited use |
|
Areas of responsibility |
||
GB |
• |
Using the instrument without instruction |
|
Responsibilities of the manufacturer of the orig- |
|
|
• Using outside the stated limits |
|
inal equipment Leica Geosystems AG, CH-9435 |
||
|
• Deactivation of safety systems and removal of |
|
Heerbrugg (for short Leica Geosystems): |
||
|
|
explanatory and hazard labels |
|
Leica Geosystems is responsible for supplying the |
|
|
• Opening of the equipment by using tools (screw- |
|
|||
|
|
product, including the User Manual and original |
|||
|
|
drivers, etc.), as far as not specifically permitted |
|
accessories, in a completely safe condition. (addi- |
|
|
|
for certain cases |
|
||
|
|
|
tional language versions can be found at: |
||
|
• Carrying out modification or conversion of the |
|
|||
|
|
www.disto.com. |
|||
|
|
product |
|
||
|
|
|
|
|
|
|
• |
Use after misappropriation |
|
Responsibilities of the manufacturer of |
|
|
• Use of accessories from other manufacturers |
|
non-Leica accessories: |
||
|
|
without the express approval of Leica Geosys- |
|
||
|
|
|
) |
|
|
|
|
tems. |
|
The manufacturers of non-Leica accessories |
|
|
• Deliberate or irresponsible behaviour on scaf- |
|
|
||
|
|
folding, when using ladders, when measuring |
|
for the Leica DISTO™ are responsible for developing, |
|
|
|
|
implementing and communicating safety concepts for |
||
|
|
near machines which are running, or near parts of |
|
their products. They are also responsible for the |
|
|
|
machines or installations which are unprotected |
|
effectiviness of these safety concepts in combination |
|
|
• Aiming directly into the sun |
|
|||
|
|
with the Leica Geosystems equipment. |
|||
|
• Deliberate dazzling of third parties; also in the |
|
|||
|
|
|
|
||
|
|
dark |
|
Responsibilities of the person in charge of |
|
|
• Inadequate safeguards at the surveying site (e.g. |
|
the instrument: |
||
|
|
when measuring on roads, construction sites, etc.) |
|
||
|
Limits of use |
|
WARNING |
||
|
|
|
The person responsible for the instrument |
||
|
) See section “Technical Data“. |
|
must ensure that the equipment is used in accor- |
||
|
|
dance with the instructions. This person is also |
|||
|
The Leica DISTO™ is designed for use in areas perma- |
|
accountable for the deployment of personnel and for |
||
|
|
their training and for the safety of the equipment |
|||
|
nently habitable by humans, do not use the product |
|
when in use. |
||
|
in explosion hazardous areas or in aggressive envi- |
|
|||
|
|
The person in charge of the instrument has the |
|||
|
ronments. |
|
|||
|
|
following duties: |
|||
|
|
|
|
||
|
Safety Instructions |
2 |
|
Leica DISTO™ D3a 776175a gb |
•To understand the safety instructions on the product and the instructions in the User Manual.
•To be familiar with local safety regulations relating to accident prevention.
•To inform Leica Geosystems immediately if the equipment becomes unsafe.
Hazards in use
CAUTION:
Watch out for erroneous distance measurements if the instrument is defective or if it has been dropped or has been misused or modified.
Precautions:
Carry out periodic test measurements. Particularly after the instrument has been subject to abnormal use, and before, during and after important measurements.
Make sure the Leica DISTO™ optics is kept clean and that there is no mechanical damage to the bumpers.
CAUTION:
In using the instrument for distance measurements or for positioning moving objects (e.g. cranes, building equipment, platforms, etc.) unforeseen events may cause erroneous measurements.
Precautions:
Only use this product as a measuring sensor, not as a control device. Your system must be configured and operated in such a way, that in case of an erroneous measurement, malfunction of the device or power
failure due to installed safety measures (e.g. safety limit switch), it is assured that no damage will occur.
WARNING: |
GB |
Flat batteries must not be disposed of with |
|
household waste. Care for the environment and take |
|
them to the collection points provided in accordance |
|
with national or local regulations. |
|
The product must not be disposed of with |
|
household waste. |
|
Dispose of the product appropriately in |
|
accordance with the national regulations in |
|
force in your country. |
|
Always prevent access to the product by |
|
unauthorized personnel. |
|
Product specific treatment and waste |
|
management information can be downloaded from |
|
the Leica Geosystems home page at |
|
http://www.leica-geosystems.com/treatment or |
|
received from your Leica Geosystems dealer. |
|
Electromagnetic Compatibility (EMC)
The term "electromagnetic compatibility" is taken to mean the capability of the product to function smoothly in an environment where electromagnetic radiation and electrostatic discharges are present, and without causing electromagnetic interference to other equipment.
Leica DISTO™ D3a 776175a gb |
3 |
Safety Instructions |
|
|
|
WARNING:
The Leica DISTO™ conforms to the most strin-
GB |
gent requirements of the relevant standards and |
|
regulations. Yet, the possibility of it causing interfer- |
|
ence in other devices cannot be totally excluded. |
CAUTION:
Never attempt to repair the product yourself. In case of damage, contact the local dealership.
FCC statement (applic. in U.S.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help
WARNING:
Changes or modifications not expressly approved by Leica Geosystems for compliance could void the user’s authority to operate the equipment.
Laser classification
Integrated distancemeter
The Leica DISTO™ produces a visible laser beam which emerges from the front of the instrument.
It is a Class 2 laser product in accordance with:
•IEC60825-1 : 2007 "Radiation safety of laser products"
Safety Instructions |
4 |
Leica DISTO™ D3a 776175a gb |
|
|
|
Laser Class 2 products:
Do not stare into the laser beam or direct it towards other people unnecessarily. Eye protection is normally afforded by aversion responses including the blink reflex.
WARNING:
Looking directly into the beam with optical aids (e.g. binoculars, telescopes) can be hazardous.
Precautions:
Do not look directly into the beam with optical aids.
CAUTION:
Looking into the laser beam may be hazardous to the eyes.
Precautions:
Do not look into the laser beam. Make sure the laser is aimed above or below eye level. (particularly with fixed installations, in machines, etc.)
Labelling
GB |
Laser Radiation
Do not stare into the beam
Laser class 2 acc. IEC 60825-1:2007
Maximum radiant power: <1mW Emitted wavelength: 620-690nm
Beam divergence: 0.16 x 0.6 mrad |
|
Pulse duration: |
1 x 10 -9 s |
Position of the product label:
Leica DISTO™ D3a 776175a gb |
5 |
Safety Instructions |
|
|
|
Start-up
GB
Inserting/replacing batteries
Changing the reference point (multifunctional endpiece)
1Remove battery compartment lid and attach handstrap.
2Insert batteries, observing correct polarity.
3Close the battery compartment again. Replace the batteries when the symbol flashes permanently in the display.
) |
Only use alkaline or rechargeable batteries. |
) |
Remove the batteries before any long period |
of non-use to avoid the danger of corrosion.
The instrument can be adapted for the following measuring situations:
•For measurements from an edge, fold out the positioning bracket until it first locks in place.
•For measurements from a corner, open the positioning bracket until it locks in place, then push the positioning bracket lightly to the right to fold it out fully.
A built-in sensor automatically detects the orientation of the positioning bracket and adjusts the zero point of the instrument accordingly.
Start-up |
6 |
Leica DISTO™ D3a 776175a gb |
|
|
|
Keypad |
|
|
GB |
1 |
|
2 |
11 |
|
|
3 |
4 |
10 |
|
5 |
6 |
9 |
|
7 |
8 |
12 |
|
1 ON / DIST (On/measuring) - button
2 Horizontal distance - button
3Plus (+) - button
4Minus (-) - button
5Area / volume - button
6Indirect measurement (Pythagoras) - button
7Reference - button
8 |
Functions - button |
9 |
Timer - button |
10Storage - button
11Menu/equal - button
12Clear/off - button
Leica DISTO™ D3a 776175a gb |
7 |
Start-up |
|
|
|