Leica Geosystems CSNGV User Manual

Leica CS20 & GS07 Sensor

User Manual

ersion 2.0

V English

Introduction

Purchase

☞

Product identification

Trademarks

Congratulations on the purchase of the Leica CS20/GS07.

This manual contains important safety directions as well as instructions for setting up the p information.

Read carefully through the User Manual before you switch on the product.

The content of this document is subject to change without prior notice. Ensure

t the product is used in accordance with the latest version of this docu-

tha ment.

Updated versions are available for download at the following Internet address: https://myworld.leica-geosystems.com > myDownloads.

The model and serial number of your product are indicated on the type plate.

lways refer to this information when you need to contact your agency or

A Leica Geosystems authorised service centre.

•

Windows is a r States and other countries

•

SD Logo is a trademark of SD-3C, LLC.

•

Bluetooth

roduct and operating it. Refer to "1 Safety Directions" for further

egistered trademark of Microsoft Corporation in the United

is a registered trademark of Bluetooth SIG, Inc.

Validity of this manual

Available

cumentation

All other trademarks are the property of their respective owners.

This manual applies to the CS20 field controller, the GS07 and the CTR20/CGR4 expansio described.

Name Description/Format

CS20 Quick Guide Provides an overview of the product

CS20 User Manual All instructions required in order to

Name Description/Format

Leica Captivate

echnical Reference

T Manual

n packs. Differences between the various models are marked and

ü ü

ogether with technical data and safety directions. Intended as a quick reference guide.

operate the product to a basic level are contained in the User Manual. Provides an overview of the product together with technical data and safety directions.

Overall comprehensive guide to the product and apps. Included are detailed descriptions of special software/hardware settings and software/hardware functions intended for technical specialists.

Refer to the following resources for all CS20 documentation/software:

•

the Leica USB do

•

https://myworld.leica-geosystems.com

cumentation card

Leica Geosystems

ddress book

On the last page of this manual, you can find the address of Leica Geosystems

adquarters. For a list of regional contacts, please visit

he http://leica-geosystems.com/contact-us/sales_support.

myWorld@Leica Geosystems (h a wide range of services, information and training material.

With direct access to myWorld, you are able to access all relevant services whenever it is convenient for you.

Service Description

myProducts Add all products that you and your company own

myService View the current service status and full service his-

mySupport Create new support requests for your products that

myTraining Enhance your product knowledge with Leica Geosys-

myTrustedServices Add your subscriptions and manage users for Leica

ttps://myworld.leica-geosystems.com) offers

and explo detailed information on your products and update your products with the latest software and keep upto-date with the latest documentation.

tory of your products in Leica Geosystems service centres. Access detailed information on the services performed and download your latest calibration certificates and service reports.

will be answered by your local Leica Geosystems Support Team. View the complete history of your support requests and view detailed information on each request in case you want to refer to previous support requests.

tems Campus - Information, Knowledge, Training. Study the latest online training material on your products and register for seminars or courses in your country.

Geosystems Trusted Services, the secure software services, that assist you to optimise your workflow and increase your efficiency.

re your world of Leica Geosystems: View

Table of Contents

1 Safety Directions 6

1.1 General Introduction 6

1.2 Definition of Use 7

1.3 Limits of Use 7

1.4 Responsibilities 8

1.5 Hazards of Use 8

1.6 Laser Classification 12

1.6.1 General 12

1.6.2 DISTO 13

1.7 Electromagnetic Compatibility (EMC) 14

1.8 FCC Statement, Applicable in U.S. 16

2 Description of the System 19

2.1 Overview 19

2.2 Terminology 19

2.3 System Concept 20

2.3.1 Software Concept 20

2.3.2 Power Concept 21

2.3.3 Data Storage Concept 22

2.4 Container Contents 23

2.5 CS Components 26

2.6 GS07 Components 26

3 User Interface 27

3.1 Keyboard 27

3.2 Operating Principles 29

3.3 LED Indicators on CS20 29

3.4 LED Indicators on GS07 30

4 Operation 32

4.1 Equipment Setup 32

4.1.1 Setting up as a Post-Processing Base 32

4.1.2 Fixing the Field Controller to a Holder and Pole 33

4.1.3 Fixing a Hand Strap to the CS 35

4.1.4 Fixing the Utility Hook to the CS 35

4.1.5 Replacing the Display Foil on the CS 36

4.1.6 Inserting and Removing a SIM Card 37

4.1.7 Setting Up for Remote Control or RTK using an Expansion Pack 37

4.1.8 Connecting to a Personal Computer 38

4.1.9 Enabling WLAN in Windows EC7 41

4.2 Batteries 41

4.2.1 Operating Principles 41

4.2.2 Changing the Battery 42

4.2.3 Charging the Battery 43

4.3 Power Functions 43

4.4 Working with the Memory Device 44

4.4.1 Working with the SD Card 44

4.4.2 Working with a USB Memory Stick 45

4.5 Using the Digital Camera 46

4.6 Using the Camera Flash Light as Torch 46

5 Care and Transport 47

5.1 Transport 47

5.2 Storage 47

5.3 Cleaning and Drying 47

4 Table of Contents

6 Technical Data 49

6.1 CS20 49

6.2 GS07 51

6.2.1 Tracking Characteristics 51

6.2.2 Accuracy 51

6.2.3 Technical Data 52

6.3 Conformity to National Regulations 53

6.3.1 Products without Radio 53

6.3.2 CS20 54

6.3.3 GS07, CTR20 56

6.3.4 CGR4 57

7 Software Licence Agreement 59

Appendix A Pin Assignments and Sockets 60

A.1 CS20 60 A.2 GS07 60

Table of Contents 5

1 Safety Directions

1.1 General Introduction

Description

About warning

essages

The following directions enable the person responsible for the product, and the

erson who actually uses the equipment, to anticipate and avoid operational

p hazards.

The person responsible for the product must ensure that all users understand these directions and adhere to them.

Warning messages are an essential part of the safety concept of the instru-

t. They appear wherever hazards or hazardous situations can occur.

men

Warning messages...

•

For the users‘ safety, all safety instructions and safety messages shall be s

trictly observed and followed! Therefore, the manual must always be available

to all persons performing any tasks described here. DANGER, WARNING, CAUTION and NOTICE are standardised signal words for

identifying levels of hazards and risks related to personal injury and property damage. For your safety, it is important to read and fully understand the following table with the different signal words and their definitions! Supplementary safety information symbols may be placed within a warning message as well as supplementary text.

Type Description

NOTICE

e the user alert about direct and indirect hazards concerning the use

mak of the product. contain general rules of behaviour.

DANGER

WARNING

CAUTION

☞

Indicates an imminently hazardous situation which, if no serious injury.

Indicates a potentially hazardous situation or an unin could result in death or serious injury.

Indicates a potentially hazardous situation or an unin may result in minor or moderate injury.

Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in appreciable material, financial and environmental damage.

Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner.

t avoided, will result in death or

tended use which, if not avoided,

6 Safety Directions

1.2 Definition of Use

•

emote control of product.

Intended use

•

Data communication with external appliances.

•

Recording measurements.

•

Computing with software.

•

Carrying out measurement tasks using various GNSS measuring techniques.

•

Recording GNSS and point related data.

•

Measuring raw data and computing coordinates using carrier phase and code signal from GNSS satellites (GNSS systems).

Reasonably

oreseeable misuse

•

e of the product without instruction.

Us Use outside of the intended use and limits. Disabling safety systems. Removal of hazard notices. Opening the product using tools, for example screwdriver, unless this is permitted for certain functions. Modification or conversion of the product. Use after misappropriation. Use of products with recognisable damage or defects. Use with accessories from other manufacturers without the prior explicit approval of Leica Geosystems. Inadequate safeguards at the working site. Controlling of machines, moving objects or similar monitoring application without additional control and safety installations.

1.3 Limits of Use

Environment

Suitable for use in an atmosphere appropriate for permanent human habita-

n: not suitable for use in aggressive or explosive environments.

tio

WARNING

Working in hazardous areas, or close to electrical installations or simi-

uations

lar sit

Life Risk.

Precautions:

▶

Local safety authorities and safety experts must be contacted by the person responsible for the product before working in such conditions.

☞

Environment

The following advice is only valid for battery charger, power adapter and car adap

ter.

Suitable for use in dry environments only and not under adverse conditions.

Safety Directions 7

1.4 Responsibilities

Manufacturer of the

oduct

Person responsible for the product

Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica

eosystems, is responsible for supplying the product, including the User Man-

G ual and original accessories, in a safe condition.

The person responsible for the product has the following duties:

•

o understand the safety instructions on the product and the instructions

T in the User Manual.

•

To ensure that it is used in accordance with the instructions.

•

To be familiar with local regulations relating to safety and accident prevention.

•

To inform Leica Geosystems immediately if the product and the application becomes unsafe.

•

To ensure that the national laws, regulations and conditions for the operation of the product are respected.

•

To ensure that the radio modem is not operated without the permission of the local authorities on frequencies and/or output power levels other than those specifically reserved and intended for use without a specific permit. The internal and external radio modems have been designed to operate on frequency ranges and output power ranges, the exact use of which differs from one region and/or country to another.

1.5 Hazards of Use

DANGER

Risk of electrocution

Becaus staffs and extensions in the vicinity of electrical installations such as power cables or electrical railways.

Precautions:

▶

Distraction/loss of attention

Dur ger of accidents occurring if the user does not pay attention to the environmental conditions around, for example obstacles, excavations or traffic.

Precautions:

▶

e of the risk of electrocution, it is dangerous to use poles, levelling

Keep at a safe distance from electrical installations. If it is essential to work in this environment, first contact the safety authorities responsible for the electrical installations and follow their instructions.

WARNING

ing dynamic applications, for example stakeout procedures, there is a dan-

The person responsible for the product must make all users fully aware of the existing dangers.

8 Safety Directions

WARNING

Inadequate securing of the working site

his can lead to dangerous situations, for example in traffic, on building sites

T and at industrial installations.

Precautions:

▶

Always ensure that the working site is adequately secured.

▶

Adhere to the regulations governing safety, accident prevention and road traffic.

CAUTION

Not properly secured accessories

If the ac product is subjected to mechanical shock, for example blows or falling, the product may be damaged or people can sustain injury.

Precautions:

▶

Incorrect fastening of the external antenna

Inc the risk of the equipment being broken by mechanical influence, vibration or airstream. This may result in accident and physical injury.

Precautions:

▶

cessories used with the product are not properly secured and the

When setting up the product, make sure that the accessories are correctly adapted, fitted, secured, and locked in position.

Avoid subjecting the product to mechanical stress.

WARNING

orrect fastening of the external antenna to vehicles or transporters poses

Attach the external antenna professionally. The external antenna must be secured additionally, for example by use of a safety cord. Ensure that the mounting device is correctly mounted and able to carry the weight of the external antenna (>1 kg) safely.

WARNING

Lightning strike

If the p may increase the risk of being struck by lightning.

Precautions:

▶

roduct is used with accessories, for example masts, staffs, poles, you

Do not use the product in a thunderstorm.

Safety Directions 9

DANGER

Risk of being struck by lightning

If the p you may increase the risk of being struck by lightning. Danger from high voltages also exists near power lines. Lightning, voltage peaks, or the touching of power lines can cause damage, injury and death.

Precautions:

▶

roduct is used with accessories, for example on masts, staffs, poles,

Do not use the product in a thunderstorm as you can increase the risk of being struck by lightning.

Be sure to remain at a safe distance from electrical installations. Do not use the product directly under or close to power lines. If it is essential to work in such an environment contact the safety authorities responsible for electrical installations and follow their instructions.

If the product has to be permanently mounted in an exposed location, it is advisable to provide a lightning conductor system. A suggestion on how to design a lightning conductor for the product is given below. Always follow the regulations in force in your country regarding grounding antennas and masts. These installations must be carried out by an authorised specialist.

To prevent damages due to indirect lightning strikes (voltage spikes) cables, for example for antenna, power source or modem should be protected with appropriate protection elements, like a lightning arrester. These installations must be carried out by an authorised specialist.

If there is a risk of a thunderstorm, or if the equipment is to remain unused and unattended for a long period, protect your product additionally by unplugging all systems components and disconnecting all connecting cables and supply cables, for example, instrument - antenna.

WARNING

Inappropriate mechanical influences to batteries

ing the transport, shipping or disposal of batteries it is possible for inappro-

Dur priate mechanical influences to constitute a fire hazard.

Precautions:

▶

Before shipping the product or disposing it, discharge the batteries by the product until they are flat.

▶

When transporting or shipping batteries, the person in charge of the product must ensure that the applicable national and international rules and regulations are observed.

▶

Before transportation or shipping, contact your local passenger or freight transport company.

WARNING

Exposure of batteries to high mechanical stress, high ambient tempera-

ures or immersion into fluids

This can cause leakage, fire or explosion of the batteries.

Precautions:

▶

Protect the batteries from mechanical influences and high ambient temperatures. Do not drop or immerse batteries into fluids.

10 Safety Directions

WARNING

Short circuit of battery terminals

ttery terminals are short circuited e.g. by coming in contact with jewellery,

If ba keys, metallised paper or other metals, the battery can overheat and cause injury or fire, for example by storing or transporting in pockets.

Precautions:

▶

Make sure that the battery terminals do not come into contact with metallic objects.

For the AC power supply:

WARNING

If unit is not connected to ground, death or serious injury can occur.

ecautions:

▶

To avoid electric shock power cable and power outlet must be grounded.

☞

The following advice is only valid for power adapter and car adapter.

WARNING

Electric shock due to use under wet and severe conditions

If unit b

Precautions:

▶ ▶

▶

The following advice is only valid for power adapter and car adapter.

Unauthorised opening of the product

Either o

•

Precautions:

▶ ▶

ecomes wet it may cause you to receive an electric shock.

If the product becomes humid, it must not be used! Use the product only in dry environments, for example in buildings or vehi-

cles.

Protect the product against humidity.

WARNING

f the following actions may cause you to receive an electric shock: Touching live components Using the product after incorrect attempts were made to carry out repairs

Do not open the product! Only Leica Geosystems authorised service centres are entitled to repair

these products.

Safety Directions 11

WARNING

Improper disposal

If the p

•

Precautions:

▶

Improperly repaired equipment

Risk o edge.

Precautions:

▶

roduct is improperly disposed of, the following can happen:

If polymer parts are burnt, poisonous gases are produced which may impair health. If batteries are damaged or are heated strongly, they can explode and cause poisoning, burning, corrosion or environmental contamination. By disposing of the product irresponsibly you may enable unauthorised persons to use it in contravention of the regulations, exposing themselves and third parties to the risk of severe injury and rendering the environment liable to contamination.

The product must not be disposed with household waste.

ose of the product appropriately in accordance with

Disp the national regulations in force in your country. Always prevent access to the product by unauthorised personnel.

Product-specific treatment and waste management information can be received from your Leica Geosystems distributor.

WARNING

f injuries to users and equipment destruction due to lack of repair knowl-

Only authorised Leica Geosystems Service Centres are entitled to repair these products.

1.6 Laser Classification

1.6.1 General

General

The following chapters provide instructions and training information about laser sa

fety according to international standard IEC 60825-1 (2014-05) and technical report IEC TR 60825-14 (2004-02). The information enables the person responsible for the product and the person who actually uses the equipment, to anticipate and avoid operational hazards.

☞

According to IEC TR 60825-14 (2004-02), products classified as laser class 1, class 2 and class 3R do no

•

laser safety officer involvement,

•

protective clothes and eyewear,

•

special warning signs in the laser working area if used and operated as defined in this User Manual due to the low eye hazard level.

National laws and local regulations could impose more stringent instructions for the safe use of lasers than IEC 60825-1 (2014-05) and IEC TR 60825-14 (2004-02).

t require:

12 Safety Directions

1.6.2 DISTO

8577_002

008468_001

General

The DISTO module built into the product produces a visible red laser beam which emer

ges from the window at the top of the product.

The laser product described in this section is classified as laser class 2 in accordance with:

•

C 60825-1 (2014-05): “Safety of laser products”

These products are safe for momentary exposures but can be hazardous for delib

erate staring into the beam. The beam may cause dazzle, flash-blindness

and after-images, particularly under low ambient light conditions.

Description Value

Wavelength 620 nm - 690 nm Maximum average radiant power 0.95 mW Pulse duration > 400 ps Pulse repetition frequency (PRF) 320 MHz Beam divergance 0.16 mrad x 0.6 mrad

CAUTION

Class 2 laser product

rom a safety perspective, class 2 laser products are not inherently safe for the

F eyes.

Precautions:

▶

Avoid staring into the beam or viewing it through optical instruments.

▶

Avoid pointing the beam at other people or at animals.

Labelling and location

f laser aperture

a Laser beam

Laser Radiation

Do no

t stare into the beam.

Class 2 Laser Product according to

IEC 60825-1 (2014 - 05)

Po £ 0.95 mW

l = 620 nm - 690 nm

Safety Directions 13

1.7 Electromagnetic Compatibility (EMC)

Description

The term Electromagnetic Compatibility is taken to mean the capability of the

roduct to function smoothly in an environment where electromagnetic radia-

p tion and electrostatic discharges are present, and without causing electromagnetic disturbances to other equipment.

WARNING

Electromagnetic radiation

tromagnetic radiation can cause disturbances in other equipment.

Elec

Precautions:

▶

Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that other equipment may be disturbed.

CAUTION

Use of the product with accessories from other manufacturers. For

ample field computers, personal computers or other electronic equip-

ex ment, non-standard cables or external batteries

This may cause disturbances in other equipment.

Precautions:

▶

Use only the equipment and accessories recommended by Leica Geosystems.

▶

When combined with the product, they meet the strict requirements stipulated by the guidelines and standards.

▶

When using computers, two-way radios or other electronic equipment, pay attention to the information about electromagnetic compatibility provided by the manufacturer.

CAUTION

Intense electromagnetic radiation. For example, near radio transmitters, transp

Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that function of the product may be disturbed in such an electromagnetic environment.

Precautions:

▶

Check the plausibility of results obtained under these conditions.

onders, two-way radios or diesel generators

14 Safety Directions

CAUTION

Electromagnetic radiation due to improper connection of cables

If the p two ends, for example external supply cables, interface cables, the permitted level of electromagnetic radiation may be exceeded and the correct functioning of other products may be impaired.

Precautions:

▶

Use of product with radio or digital cellular phone devices

Elec tions, in medical devices, for example pacemakers or hearing aids and in aircrafts. Electromagnetic fields can also affect humans and animals.

Precautions:

▶

roduct is operated with connecting cables attached at only one of their

While the product is in use, connecting cables, for example product to external battery, product to computer, must be connected at both ends.

WARNING

tromagnetic fields can cause disturbances in other equipment, in installa-

Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that other equipment can be disturbed or that humans or animals can be affected.

Do not operate the product with radio or digital cellular phone devices in the vicinity of filling stations or chemical installations, or in other areas where an explosion hazard exists.

Do not operate the product with radio or digital cellular phone devices near to medical equipment.

Do not operate the product with radio or digital cellular phone devices in aircrafts.

Do not operate the product with radio or digital cellular phone devices for long periods with the product immediately next to your body.

Safety Directions 15

1.8 FCC Statement, Applicable in U.S.

Art.No.:

123456

Equip. No.:

1234567

S.No.:

1234567

Power:15V nominal / 2.2 A max. Made in Singapore Manufactured: 20YY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

IC: 3177A-CSNGG

FCC ID: RFD-CSNGG

acc. to IEC 60825-1:2014

λ = 620-690nm, P = <1mW, t = 1x10

-9

Leica Geosystems AG CH-9435 Heerbrugg

Model: CS20 LTE Disto

IP68

8466_003

This device comp li es w ith p ar t 15 of t he FC C Rul es. O pe rat io n is subject to the following two conditions: (1) This device may not cause harmful inter fe re nc e, a nd (2) t hi s dev ic e m us t ac c ep t any i nte r f er en ce received, including interference that may cause undesired operation.

FCC-ID: RFD-CTR20

IC: 3177A-CTR2 0

Made in Switzerland, Manufactured: 20XX Leica Geosystems AG, CH-9435 Heerbrugg

S.No. :1234567 Equip.No.:12345678

Art. N o . : 808038

Type:CTR20

008467_002

WARNING

This equipment has been tested and found to comply with the limits for a

lass B digital device, pursuant to part 15 of the FCC rules.

C These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

eorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Labelling CS20

Labelling CTR20

CAUTION

Changes or modifications not expressly approved by Leica Geosystems for

ompliance could void the user's authority to operate the equipment.

16 Safety Directions

0014952_001

Model: CGR4

Equip.No.:12345678 Leica Geosystems AG, CH-9435 Heerbrugg Made in Switzerland, Manufactured: 2017

Contains: FCC ID: MRBSATEL - TA23 IC: 2422A - SATELTA23

S.No.: 1234568 Art.No.: 798498

003 - 170097

This device contains a transmitter:

FCC: PVH0925 IC ID: 5325A-0925

R 202-SMA054 T D 12-0040 202

IP66 IP68

Model: GS07

Art.No.:

Equip. No.: 12345678 S.No.:

123456

Power: 7.4V --- nominal / 0.6 A max. Leica Geosystems AG CH-9435 Heerbrugg

Manufactured: 20XX Made in Switzerland

869374

0016445_002

0008469_006

11WE

MH29443

Type: GEB331

Li-Ion Battery

11.1 V / 2.8 Ah 15 A / 31.1 Wh Leica Ge osystems AG, CH -9435 Heerbrug g

Art.No.: 799190 S.No.: XXXXX Made in China

005044_002

005044

_002

Made in China

Type: GEB212

2ICR19/66

Art. No.: 772806

7.4V

/2.6 Ah

10A

19Wh

XXXXXXXX-XXXXXX

A/S:+82 31 620 6252

Leica Geosystems AG, CH-9435 Heerbrugg

Li-Ion Battery

5A/130 C

S. No.:10412

전지

Manufactured by Huizhou Longji Electronics Co., Ltd.

Labelling CGR4

Labelling GS07

Labelling GEB331

Labelling internal ba

ttery GEB212

Exposure to radio fre-

ency (RF) signals

The wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limit for exposure to radio frequency (RF) energy set by the OET Bulletin 65 Supplement C / Ministry of Health (Canada), Safety Code 6. These limits are part of comprehensive guidelines and established permitted levels of RF energy for the general population. These guidelines are based on the safety standards previously set by international standard bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device has been shown to be capable of compliance for localised specific

Safety Directions 17

absorption rate (SAR) for uncontrolled environment / general public exposure limits sp the measurement procedures specified in IEEE Std. 1528-2003.

This Class (B) digital apparatus complies with Canadian ICES-003. Ce du Canada.

Canada Compliance Statement

T is subject to the following two conditions:

Canada Déclaration de Conformité

Le p appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

ecific in ANSI/IEEE C95.1-1992 and had been tested in accordance with

WARNING

t appareil numérique de la classe (B) est conforme à la norme NMB-003

his device complies with Industry Canada’s license-exempt RSSs. Operation

1. This device may not cause interference; and

2. This device must accept any interference, including interference that may cause undesired operation of the device.

résent appareil est conforme aux CNR d’Industrie Canada applicables aux

1. l’appareil ne doit pas produire de brouillage;

2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

18 Safety Directions

2 Description of the System

0016300_002

CTR20CGR4

CS20 LTE DISTOCS20 LTE

GS07CS20

2.1 Overview

System components

2.2 Terminology

CS general descrip-

ion

Available models

CS is a collective term describing the various models of the multi-purpose field c

ontroller which is used with GNSS and TS instruments.

Model CS20

(876476)

CS20 L

(876477,

876479)

CS20 LTE DISTO (876478,

876480)

Touch screen Colour display Internal long-range TS commu-

ü ü ü

ü ü

nication radio Internal LTE modem -

Internal battery

ü ü ü

DISTO - SD card Bluetooth External long-range TS commu-

tion radio

nica

GNSS UHF RTK radio

Wireless LAN 802.11b/g/n Windows EC 7 Camera with flash

ü ü ü

- As expansion pack CTR20

- As expansion pack CGR4

ü ü ü

Camera in DISTO - -

ü ü

Description of the System 19

emovable

+ 43 hidden pages