PurchaseCongratulations on the purchase of a Leica CS20.
This manual contains important safety directions as well as instructions for setting up
the product and operating it. Refer to "1 Safety Directions" for further information.
Read carefully through the User Manual before you switch on the product.
Product identification
Trademarks• Windows is a registered trademark of Microsoft Corporation in the United States
Validity of this
manual
Available
documentation
The type and serial number of your product are indicated on the type plate.
Always refer to this information when you need to contact your agency or Leica
Geosystems authorised service workshop.
and other countries
• SD Logo is a trademark of SD-3C, LLC.
•
Bluetooth
All other trademarks are the property of their respective owners.
This manual applies to the CS20 field controller and CTR20 expansion pack. Differences
between the various models are marked and described.
NameDescription/Format
CS20 Quick
Guide
CS20 User
Manual
®
is a registered trademark of Bluetooth SIG, Inc.
Provides an overview of the product together with technical data and safety directions. Intended as a quick
reference guide.
All instructions required in order to operate the product
to a basic level are contained in the User Manual.
Provides an overview of the product together with technical data and safety directions.
99
-9
NameDescription/Format
Leica Captivate
Technical
Reference
Manual
Refer to the following resources for all CS20 documentation/software:
• the Leica USB documentation card
• https://myworld.leica-geosystems.com
Overall comprehensive guide to the product and apps.
Included are detailed descriptions of special software/hardware settings and software/hardware functions intended for technical specialists.
-9
CS20, Introduction
2
myWorld@Leica Geosystems (https://myworld.leica-geosystems.com) offers a
wide range of services, information and training material.
With direct access to myWorld, you are able to access all relevant services whenever
it is convenient for you, 24 hours a day, 7 days per week. This increases your efficiency
and keeps you and your equipment instantly updated with the latest information from
Leica Geosystems.
ServiceDescription
myProductsAdd all Leica Geosystems products that you and your company own.
View detailed information on your products, buy additional options
or Customer Care Packages (CCPs), update your products with the
latest software and keep up-to-date with the latest documentation.
myServiceView the service history of your products in Leica Geosystems
Service Centres and detailed information on the services performed
on your products. For your products that are currently in Leica
Geosystems Service Centres view the current service status and the
expected end date of service.
mySupportCreate new support requests for your products that will be answered
by your local Leica Geosystems Support Team. View the complete
history of your Support and view detailed information on each
request in case you want to refer to previous support requests.
myTrainingEnhance your product knowledge with the Leica Geosystems Campus
- Information, Knowledge, Training. Study the latest online training
material or download training material on your products. Keep upto-date with the latest News on your products and register for Seminars or Courses in your country.
myTrustedServices
Offers increased productivity while at the same time providing
maximum security.
• myExchange
With myExchange you can exchange any files/objects from your
computer to any of your Leica Exchange Contacts.
• mySecurity
If your instrument is ever stolen, a locking mechanism is available
to ensure that the instrument is disabled and can no longer be
used.
CS20, Introduction
3
Table of Contents
In this manualChapterPage
1Safety Directions
1.1General Introduction6
1.2Definition of Use7
1.3Limits of Use7
1.4Responsibilities8
1.5Hazards of Use8
1.6Laser Classification11
1.6.1General11
1.6.2DISTO11
1.7Electromagnetic Compatibility EMC12
1.8FCC Statement, Applicable in U.S.13
2Description of the System
2.1Overview15
2.2Terminology15
2.3System Concept16
2.3.1Software Concept16
2.3.2Power Concept17
2.3.3Data Storage Concept17
2.4CS Components18
3User Interface
3.1Keyboard19
3.2Operating Principles21
3.3LED Indicators on CS2021
6
15
19
4Operation
4.1Equipment Setup22
4.1.1Fixing the CS to a Holder and Pole22
4.1.2Fixing a Hand Strap to the CS23
4.1.3Fixing the Utility Hook to the CS24
4.1.4Replacing the Display Foil on the CS24
4.1.5Inserting and Removing a SIM Card25
4.1.6Setting up for Usage of Long Range Bluetooth Expansion Pack CTR2026
4.1.7Connecting to a Personal Computer27
4.1.8Enabling WLAN in Windows EC729
4.2Batteries30
4.2.1Operating Principles30
4.2.2Changing the Battery30
4.2.3Charging the Battery31
4.3Power Functions31
4.4Working with the Memory Device32
4.4.1Working with the SD Card32
4.4.2Working with a USB Memory Stick33
4.5Using the Digital Camera33
4.6Using the Camera Flash Light as Torch34
22
CS20, Table of Contents
4
5Care and Transport
5.1Transport35
5.2Storage35
5.3Cleaning and Drying35
35
6Technical Data
6.1CS20 Technical Data37
6.2CTR20 Technical Data38
6.3Conformity to National Regulations39
6.3.1CS2039
6.3.2CTR2041
7Software Licence Agreement
Appendix APin Assignments and Sockets
A.1CS2043
37
42
43
CS20, Table of Contents
5
1Safety Directions
1.1General Introduction
DescriptionThe following directions enable the person responsible for the product, and the
person who actually uses the equipment, to anticipate and avoid operational hazards.
The person responsible for the product must ensure that all users understand these
directions and adhere to them.
About Warning
Messages
Warning messages are an essential part of the safety concept of the instrument. They
appear wherever hazards or hazardous situations can occur.
Warning messages...
• make the user alert about direct and indirect hazards concerning the use of the
product.
• contain general rules of behaviour.
For the users‘ safety, all safety instructions and safety messages shall be strictly
observed and followed! Therefore, the manual must always be available to all persons
performing any tasks described herein.
DANGER, WARNING, CAUTION and NOTICE are standardized signal words for identifying levels of hazards and risks related to personal injury and property damage. For
your safety it is important to read and fully understand the table below with the
different signal words and their definitions! Supplementary safety information
symbols may be placed within a warning message as well as supplementary text.
TypeDescription
DANGER
WARNING
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation or an unintended
use which, if not avoided, could result in death or serious injury.
CS20, Safety Directions
NOTICE
)
CAUTION
Indicates a potentially hazardous situation or an unintended
use which, if not avoided, may result in minor or moderate
injury.
Indicates a potentially hazardous situation or an unintended
use which, if not avoided, may result in appreciable material,
financial and environmental damage.
Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.
6
1.2Definition of Use
Intended use• Remote control of product.
• Data communication with external appliances.
• Recording measurements.
• Computing with software.
• Carrying out measurement tasks using various GNSS measuring techniques.
• Recording GNSS and point related data.
• Measuring raw data and computing coordinates using carrier phase and code signal
from GNSS satellites.
Reasonably forseeable misuse
• Use of the product without instruction.
• Use outside of the intended use and limits.
• Disabling safety systems.
• Removal of hazard notices.
• Opening the product using tools, for example screwdriver, unless this is permitted
for certain functions.
• Modification or conversion of the product.
• Use after misappropriation.
• Use of products with recognisable damages or defects.
• Use with accessories from other manufacturers without the prior explicit approval
of Leica Geosystems.
• Inadequate safeguards at the working site.
• Controlling of machines, moving objects or similar monitoring application without
additional control- and safety installations.
1.3Limits of Use
EnvironmentSuitable for use in an atmosphere appropriate for permanent human habitation: not
suitable for use in aggressive or explosive environments.
DANGER
Local safety authorities and safety experts must be contacted before working in
hazardous areas, or close to electrical installations or similar situations by the person
in charge of the product.
)
EnvironmentSuitable for use in dry environments only and not under adverse conditions.
CS20, Safety Directions
The following advice is only valid for battery charger, power adapter and car adapter.
7
1.4Responsibilities
Manufacturer of
the product
Person responsible
for the product
Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica Geosystems, is responsible for supplying the product, including the user manual and original
accessories, in a safe condition.
The person responsible for the product has the following duties:
• To understand the safety instructions on the product and the instructions in the
user manual.
• To ensure that it is used in accordance with the instructions.
• To be familiar with local regulations relating to safety and accident prevention.
• To inform Leica Geosystems immediately if the product and the application
becomes unsafe.
• To ensure that the national laws, regulations and conditions for the operation of
e.g. radio transmitters or lasers are respected.
1.5Hazards of Use
DANGER
Because of the risk of electrocution, it is dangerous to use poles and extensions in the
vicinity of electrical installations such as power cables or electrical railways.
Precautions:
Keep at a safe distance from electrical installations. If it is essential to work in this
environment, first contact the safety authorities responsible for the electrical installations and follow their instructions.
WARNING
WARNING
CAUTION
During dynamic applications, for example stakeout procedures there is a danger of
accidents occurring if the user does not pay attention to the environmental conditions
around, for example obstacles, excavations or traffic.
Precautions:
The person responsible for the product must make all users fully aware of the existing
dangers.
Inadequate securing of the working site can lead to dangerous situations, for example
in traffic, on building sites, and at industrial installations.
Precautions:
Always ensure that the working site is adequately secured. Adhere to the regulations
governing safety and accident prevention and road traffic.
If the accessories used with the product are not properly secured and the product is
subjected to mechanical shock, for example blows or falling, the product may be
damaged or people can sustain injury.
Precautions:
When setting-up the product, make sure that the accessories are correctly adapted,
fitted, secured, and locked in position.
Avoid subjecting the product to mechanical stress.
CS20, Safety Directions
8
WARNING
Incorrect fastening of the external antenna to vehicles or transporters poses the risk
of the equipment being broken by mechanical influence, vibration or airstream. This
may result in accident and physical injury.
Precautions:
Attach the external antenna professionally. The external antenna must be secured
additionally, for example by use of a safety cord. Ensure that the mounting device is
correctly mounted and able to carry the weight of the external antenna (>1 kg) safely.
WARNING
DANGER
If the product is used with accessories, for example masts, staffs, poles, you may
increase the risk of being struck by lightning.
Precautions:
Do not use the product in a thunderstorm.
If the product is used with accessories, for example on masts, staffs, poles, you may
increase the risk of being struck by lightning. Danger from high voltages also exists
near power lines. Lightning, voltage peaks, or the touching of power lines can cause
damage, injury and death.
Precautions:
• Do not use the product in a thunderstorm as you can increase the risk of being
struck by lightning.
• Be sure to remain at a safe distance from electrical installations. Do not use the
product directly under or close to power lines. If it is essential to work in such an
environment contact the safety authorities responsible for electrical installations
and follow their instructions.
• If the product has to be permanently mounted in an exposed location, it is advisable to provide a lightning conductor system. A suggestion on how to design a
lightning conductor for the product is given below. Always follow the regulations in
force in your country regarding grounding antennas and masts. These installations
must be carried out by an authorised specialist.
• To prevent damages due to indirect lightning strikes (voltage spikes) cables, for
example for antenna, power source or modem should be protected with appropriate protection elements, like a lightning arrester. These installations must be
carried out by an authorised specialist.
• If there is a risk of a thunderstorm, or if the equipment is to remain unused and
unattended for a long period, protect your product additionally by unplugging all
systems components and disconnecting all connecting cables and supply cables, for
example, instrument - antenna.
WARNING
WARNING
CS20, Safety Directions
During the transport, shipping or disposal of batteries it is possible for inappropriate
mechanical influences to constitute a fire hazard.
Precautions:
Before shipping the product or disposing of it, discharge the batteries by running the
product until they are flat.
When transporting or shipping batteries, the person in charge of the product must
ensure that the applicable national and international rules and regulations are
observed. Before transportation or shipping contact your local passenger or freight
transport company.
High mechanical stress, high ambient temperatures or immersion into fluids can cause
leakage, fire or explosions of the batteries.
Precautions:
Protect the batteries from mechanical influences and high ambient temperatures. Do
not drop or immerse batteries into fluids.
9
WARNING
If battery terminals are short circuited e.g. by coming in contact with jewellery, keys,
metalized paper or other metals, the battery can overheat and cause injury or fire, for
example by storing or transporting in pockets.
Precautions:
Make sure that the battery terminals do not come into contact with metallic objects.
)
)
WARNING
WARNING
WARNING
The following advice is only valid for power adapter and car adapter.
If you open the product, either of the following actions may cause you to receive an
electric shock.
• Touching live components
• Using the product after incorrect attempts were made to carry out repairs
Precautions:
Do not open the product. Only Leica Geosystems authorised service workshops are
entitled to repair these products.
The following advice is only valid for power adapter and car adapter.
The product is not designed for use under wet and severe conditions. If unit becomes
wet it may cause you to receive an electric shock.
Precautions:
Use the product only in dry environments, for example in buildings or vehicles. Protect
the product against humidity. If the product becomes humid, it must not be used!
If the product is improperly disposed of, the following can happen:
• If polymer parts are burnt, poisonous gases are produced which may impair health.
• If batteries are damaged or are heated strongly, they can explode and cause
poisoning, burning, corrosion or environmental contamination.
• By disposing of the product irresponsibly you may enable unauthorised persons to
use it in contravention of the regulations, exposing themselves and third parties to
the risk of severe injury and rendering the environment liable to contamination.
Precautions:
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national
regulations in force in your country.
Always prevent access to the product by unauthorised personnel.
WARNING
CS20, Safety Directions
Product-specific treatment and waste management information can be downloaded
from the Leica Geosystems home page at http://www.leicageosystems.com/treatment or received from your Leica Geosystems dealer.
Only Leica Geosystems authorised service workshops are entitled to repair these products.
10
1.6Laser Classification
1.6.1General
GeneralThe following chapters provide instructions and training information about laser safety
according to international standard IEC 60825-1 (2014-05) and technical report IEC TR
60825-14 (2004-02). The information enables the person responsible for the product
and the person who actually uses the equipment, to anticipate and avoid operational
hazards.
)
)
1.6.2DISTO
GeneralThe DISTO module built into the product produces a visible red laser beam which
emerges from the window at the top of the product.
According to IEC TR 60825-14 (2004-02), products classified as laser class 1,
class 2 and class 3R do not require:
• laser safety officer involvement,
• protective clothes and eyewear,
• special warning signs in the laser working area
if used and operated as defined in this User Manual due to the low eye hazard
level.
National laws and local regulations could impose more stringent instructions
for the safe use of lasers than IEC 60825-1 (2014-05) and IEC TR 60825-14
(2004-02).
CAUTION
The laser product described in this section is classified as laser class 2 in accordance
with:
• IEC 60825-1 (2014-05): “Safety of laser products”
These products are safe for momentary exposures but can be hazardous for deliberate
staring into the beam. The beam may cause dazzle, flash-blindness and after-images,
particularly under low ambient light conditions.
DescriptionValue
Wavelength620 nm - 690 nm
Maximum average radiant power0.95 mW
Pulse duration> 400 ps
Pulse repetition frequency (PRF)320 MHz
Beam divergance0.16 mrad x 0.6 mrad
From a safety perspective, class 2 laser products are not inherently safe for the eyes.
Precautions:
1) Avoid staring into the beam or viewing it through optical instruments.
2) Avoid pointing the beam at other people or at animals.
CS20, Safety Directions
11
Labelling and Location of Laser Aperture
008577_001
a
008468_001
a) Laser beam
1.7Electromagnetic Compatibility EMC
Laser Radiation
Do not stare into the beam.
Class 2 Laser Product according to
IEC 60825-1 (2014 - 05)
Po d0.95 mW
O = 620 nm - 690 nm
DescriptionThe term Electromagnetic Compatibility is taken to mean the capability of the product
to function smoothly in an environment where electromagnetic radiation and electrostatic discharges are present, and without causing electromagnetic disturbances to
other equipment.
WARNING
CAUTION
CAUTION
Electromagnetic radiation can cause disturbances in other equipment.
Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that other
equipment may be disturbed.
There is a risk that disturbances may be caused in other equipment if the product is
used with accessories from other manufacturers, for example field computers,
personal computers or other electronic equipment, non-standard cables or external
batteries.
Precautions:
Use only the equipment and accessories recommended by Leica Geosystems. When
combined with the product, they meet the strict requirements stipulated by the guidelines and standards. When using computers or other electronic equipment, pay attention to the information about electromagnetic compatibility provided by the manufacturer.
Disturbances caused by electromagnetic radiation can result in erroneous measurements.
Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that the
product may be disturbed by intense electromagnetic radiation, for example, near
radio transmitters, two-way radios or diesel generators.
Precautions:
Check the plausibility of results obtained under these conditions.
CS20, Safety Directions
12
CAUTION
If the product is operated with connecting cables attached at only one of their two
ends, for example external supply cables, interface cables, the permitted level of electromagnetic radiation may be exceeded and the correct functioning of other products
may be impaired.
Precautions:
While the product is in use, connecting cables, for example product to external battery,
product to computer, must be connected at both ends.
Radios or digital
cellular phones
WARNING
Use of product with radio or digital cellular phone devices:
Electromagnetic fields can cause disturbances in other equipment, in installations, in
medical devices, for example pacemakers or hearing aids and in aircraft. It can also
affect humans and animals.
Precautions:
Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that other
equipment can be disturbed or that humans or animals can be affected.
• Do not operate the product with radio or digital cellular phone devices in the vicinity
of filling stations or chemical installations, or in other areas where an explosion
hazard exists.
• Do not operate the product with radio or digital cellular phone devices near to
medical equipment.
• Do not operate the product with radio or digital cellular phone devices in aircraft.
1.8FCC Statement, Applicable in U.S.
)
WARNING
The greyed paragraph below is only applicable for products without radio.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
CS20, Safety Directions
Changes or modifications not expressly approved by Leica Geosystems for compliance
could void the user's authority to operate the equipment.
13
Labelling CS20
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Power:15V nominal / 2.5 A max.
Made in Switzerland
Manufactured: 20XX
Labelling CTR20
Labelling internal
battery GEB331
008466_001
008467_001
008469_001
Equip. No.:
Serial No.:
1234567
1234567
Type:CTR20
Art.No.: 808038
S.No .:1234567 Equip.No.:12345678
Made in Switzerland, Manufactured: 20XX
Leica Geosystems AG, CH-9435 Heerbrugg
This device com pl ies w it h par t 15 of t he FC C Ru les . Op er ati on i s
subject to the following two conditions: (1) This device may not cause
harmful inter f er en c e, an d (2) th is d ev ic e mu st a cc e pt a ny int er ference
received, including interference that may cause undesired operation.
Type : GEB331
Li-Ion Battery
11.1 V / 2.8 Ah
15 A / 31.1 Wh
Leica Ge osystems AG, C H-9435 Heerbrug g
Type : GEB331
Li-Ion Battery
10.8 V / 3.0 A h
15 A / 33 Wh
Leica Ge osystems AG, C H-9435 Heerbrug g
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Art. No.:
123456
FCC-ID:
PVH0939
IC: 5325A-0939
Bluetooth QD ID: B015900
Art.No.: 799190
S.No.: XXXXX
Made in China
Art.No.: 799190
S.No.: XXXXX
Made in China
11WE
MH29443
Exposure to radio
frequency (RF)
signals
WARNING
CS20, Safety Directions
The wireless device is a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limit for exposure to radio frequency (RF) energy set by
the OET Bulletin 65 Supplement C / Ministry of Health (Canada), Safety Code 6. These
limits are part of comprehensive guidelines and established permitted levels of RF
energy for the general population. These guidelines are based on the safety standards
previously set by international standard bodies. These standards include a substantial
safety margin designed to assure the safety of all persons, regardless of age and
health.
This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
This device has been shown to be capable of compliance for localised specific absorption rate (SAR) for uncontrolled environment / general public exposure limits specific
in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement
procedures specified in IEEE Std. 1528-2003.
This Class (B) digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe (B) est conforme à la norme NMB-003 du Canada.
14
2Description of the System
2.1Overview
System compo-
CS20
nents
CS20 3.75G
008470_001
2.2Terminology
CS general description
Available models
CS is a collective term describing the various models of the multi-purpose field
controller which is used with GNSS and TS instruments.
ModelCS20
Touch screen9999
Colour display9999
Internal long-range Bluetooth radio
Internal 3.75G modem-999
Internal CDMA modem---9
Internal battery
DISTO--99
SD card9999
Bluetooth9999
Long-range Bluetooth,
external antenna (CTR20)
Wireless LAN 802.11b/g/n 9999
Windows EC 79999
Camera with flash9999
Camera in DISTO--99
1
removable
1
CS20 3.75G
DISTO
(823 164)
DISTO
CS20 3.75G
(823 165)
CTR20CS20 CDMA
CS20 3.75G
DISTO
(823 169)
CS20 CDMA
DISTO
(823 167)
-999
9999
-As expansion pack CTR20
CS20, Description of the System
15
CS available radiosRadios for remote control (RCS) are available in the following variations:
TypeDescription
CS20Radio unavailable
CS20 with
internal longrange Bluetooth
radio
CS20 with expansion pack
Field controller with an integrated long-range Bluetooth radio.
Field controller with an integrated long-range Bluetooth radio. A
high-performance wireless data transfer device (CTR20) can be
attached.
2.3System Concept
2.3.1Software Concept
Software
Software upload
Software typeDescription
CS firmwareThis software includes:
(CS_xx.fw)• The multi- language-specific version of Windows EC 7.
• The necessary functionality of the instrument,
including Leica Captivate.
• The main applications and languages are integrated
into the firmware. Languages cannot be deleted.
)
Software forDescription
All CS modelsThe software is stored in the flash RAM of the field controller.
Uploading firmware can take some time. Ensure that the battery is at least 75%
full before beginning the upload, and do not remove the battery during the
upload process.
Firmware update instructions
• Download the most recent firmware file from
https://myworld.leica-geosystems.com.
• Copy the firmware file into the \SYSTEM folder on the Leica
SD card.
)
• Start Leica Captivate. To open the Update Software panel,
• Select the firmware file to upload and start the update process.
Ensure that the Leica SD card is inserted into the field
controller before starting the upload.
select Settings > Tools > Update Software.
When the update process is finished, the new version of Leica
Captivate is started.
CS20, Description of the System
16
2.3.2Power Concept
GeneralUse the batteries, chargers and accessories recommended by Leica Geosystems to
ensure the correct functionality of the instrument.
Power options
2.3.3Data Storage Concept
DescriptionData is stored on a memory device. The memory device can be an SD card, USB stick
Memory device
ModelPower supply
all CS modelsInternally by GEB331 battery, OR
Externally by GEV276 cable, OR
Externally by GEV219 cable, OR
If an external power supply is connected and the internal battery
is inserted, then the external power is used. The internal battery
is charged.
Please note: Charging functionality is not available for CS20 field
controller (823 164).
CTR20Externally by the field controller.
Please note: Expansion pack support is not available for CS20 field
controller (823 164).
or internal memory.
SD card:All field controllers have an SD card slot fitted as standard.
An SD card can be inserted and removed. Available
capacity: 1GB, 8GB.
USB stick:All field controllers have a USB port fitted as standard.
Internal memory:All field controllers have an internal memory fitted as
standard. Available capacity: 2 GB.
)
While other SD cards can be used, Leica Geosystems recommends to only use
Leica SD cards and is not responsible for data loss or any other error that can
occur while using a non-Leica card.
)
Transfer dataData can be transferred in various ways. Refer to "4.1.7 Connecting to a Personal
)
CS20, Description of the System
Removing the SD card or USB stick while the field controller is turned on can cause loss
of data. Only remove the SD card or USB stick or unplug connecting cables when the
field controller is switched off.
Computer".
SD cards can dire c tly be used in an OM N I drive as suppli e d by Leica Geosyste m s. Other
PC card drives can require an adaptor.
17
2.4CS Components
Upside of CS20
Underside of CS20
008471_001
008472_001
a
b
c
d
a) DISTO with camera
b) Screen
c) Keyboard
d) Connector cover
e
f
g
h
a
e) Power socket
f) SD card slot
g) USB A host port
h) LEMO port (USB and serial)
a) Hand strap
b) Thread for screwing on hand strap or
b
c
d
e
f
g
h
i
utility hook
c) Expansion cover
d) Digital camera with flash
e) Stylus
f) Battery compartment
g) SIM card slot under the battery
h) Socket for fastening clip of the hand
strap
i) Tether for the stylus
CS20, Description of the System
18
3User Interface
3.1Keyboard
Keyboard Display
Keys
a
b
c
d
e
f
g
h
i
j
008473_001
k
l
m
n
o
p
q
KeyFunction
Function keys
F1-F6
Function keys
F7-F12
Corr e spon d to si x soft k eys t h at ap p ear o n the b o ttom o f the
screen when the screen is activated.
User definable keys to execute chosen commands or access
chosen screens.
Alpha keysTo type letters.
a) Function keys F1 - F6
b) Arrow keys
c) ESC
d) OK
e) Home
f) Fn
g) Numeric keys
h) ± key
i) ON/OFF
j) CAPS Lock
k) Cameras
l) Favourites
m) ENTER
n) Function keys F7 - F12; Backspace
o) Alpha keys
p) ENTER
q) SPACE
Numeric keysTo type numbers.
Caps LockSwitches between upper case and lower case letters.
BackspaceClears all entry at the beginning of user input.
Clears the last character during user input.
EscLeaves the current screen without storing any changes.
FnSwitches between the first and second level of function
keys.
SpaceEnters a blank.
EnterSelects the highlighted line and leads to the next logical
menu/ dialog.
Starts the edit mode for editable fields.
Opens a selectable list.
ON/OFFIf the field controller is already off: Turns the field controller
on when held for 2 s.
If the field controller is already on:
• Turns to Power Options menu when held for 2 s.
• Turns the field controller off when held for 5 s.
FavouritesOpens the “Favourites” pop-up bubble within Leica Capti-
vate.
CS20, User Interface
19
KeyFunction
HomeSwitches to the Windows EC7 Start Menu.
CamerasAccess the cameras.
Arrow keysMove the focus on the screen.
OKSelects the highlighted line and leads to the next logical
menu/ dialog.
Starts the edit mode for editable fields.
Opens a selectable list.
Key combinations
KeyFunction
+
+
+Hold Fn while pressing .
+Hold Fn while pressing .
+Hold Fn while pressing .
+Hold Fn while pressing .
+Hold Fn while pressing .
+Hold Fn while pressing .
+
+Hold Fn while pressing or .
Hold Fn while pressing .
Switch to Windows.
Hold Fn while pressing .
Take a screenshot of the current screen.
Increase the screen brightness.
Decrease the screen brightness.
Increase the volume for acoustic warning signals, beeps and
keypresses on the field controller.
Decrease the volume for acoustic warning signals, beeps and
keypresses on the field controller.
Lock/unlock the keyboard.
Lock/unlock the touch screen.
Hold Fn while pressing .
Turn the torch on/off.
Switch to the previous/next page.
CS20, User Interface
20
3.2Operating Principles
008513_001
a
bc
Keyboard and touch
screen
The user interface is operated either by the keyboard or by the touch screen with
supplied stylus. The workflow is the same for keyboard and touch screen entry, the
only difference lies in the way information is selected and entered.
Operation by keyboard
Information is selected and entered using the keys. Refer to "3.1 Keyboard" for a
detailed description of the keys on the keyboard and their function.
Operation by touch screen
Information is selected and entered on the screen using the supplied stylus.
OperationDescription
To select an itemTap on the item.
To start the edit mode in editable fieldsTap on the editable field.
To highlight an item or parts of it for
editing
To accept data entered into an editable
field and exit the edit mode
Drag the supplied stylus from the left to
the right.
Tap on the screen outside of the editable
field.
To open a context-sensitive menuTap on the item and hold for 2 s.
3.3LED Indicators on CS20
LED IndicatorsThe field controller has Light Emitting Diode indicators. They indicate the basic field
controller status.
a) Power LED
b) Bluetooth LED
c) Long range TS LED - not available for CS20
field controller (823 164)
Description of the LEDs
LEDLED StatusStatus of Field Controller
Power LEDoffPower is off.
greenPower is okay.
flashing
Power is okay. The battery is being charged.
green
redPower is low. The remaining time for which enough
power is available depends on the use of wireless
modules, the temperature and the age of the
battery.
flashing redPower is low. The remaining time for which enough
power is available depends on the use of wireless
modules, the temperature and the age of the
battery. The battery is being charged.
fast flashing
Power is very low. The battery must be charged.
red
Bluetooth LED
greenBluetooth is not connected.
and
Long range TS LED
blueBluetooth is connected.
CS20, User Interface
21
4Operation
008546_001
4.1Equipment Setup
4.1.1Fixing the CS to a Holder and Pole
Components of the
GHT66 Holder
Fixing the Field
Controller and
GHT66 to a Pole
Step-by-step
The GHT66 holder consists of the following components:
d
e
GHT63 clamp
a) Plastic sleeve
b) Pole clamp
c) Clamp bolt
GHT66 holder
d) Locking pin
e) Top clip
f) Mounting plate
g) Bottom clip
h) Tightening screw
i) Mounting arm
a
b
c
008545_001
f
g
h
i
StepDescription
)
For an aluminium pole, fit the plastic sleeve to the pole clamp.
1.Insert the pole into the clamp hole.
2.Attach the holder to the clamp using the clamp bolt.
3.Adjust the angle and the height of the holder on the pole to a comfortable
position.
4.Tighten the clamp with the clamp bolt.
5.Before placing the CS field controller onto
the mounting plate, ensure that the locking
pin is put into the unlocked position. To
unlock the locking pin, push the locking pin
to the left.
CS20, Operation
6.Hold the CS field controller above the holder and lower the end of the CS
field controller into the mounting plate.
7.Apply slight pressure in a downward direction and then
lower the top part of the CS field controller until the unit
is clicked into the holder. The guides of the mounting
7b
7c
plate aid in this action.
008547_001
8.After the CS field controller is placed onto
the mounting plate, ensure that the locking
pin is put into the locked position. To lock
the locking pin, push the locking pin to the
right.
008549_001
7a
22
Detaching the Field
Controller from a
Pole Step-by-step
StepDescription
1.Unlock the locking pin by pushing the locking pin to the left of the mounting
plate.
2.Place your palm over the top of the field controller.
3.While in this position, lift the top of the field controller
from the holder.
4.1.2Fixing a Hand Strap to the CS
1
2
3
008551_001
Fixing the Hand
Strap (GHT67) Stepby-step
2b
2a
3
1
008501_001
StepDescription
)
Turn over the field controller.
1.Take the end of the hand strap and clip it to the socket at the bottom of the
field controller.
2.Place the screw of the main hook into the thread at the top of the field
controller and fasten it.
3.Adjust the length of the hand strap.
CS20, Operation
23
4.1.3Fixing the Utility Hook to the CS
Fixing the Utility
Hook (GHT68) Stepby-step
4.1.4Replacing the Display Foil on the CS
1b
1a
008498_001
StepDescription
)
)
1.Place the screw of the utility hook into the thread at the top of the field
If the hand strap is already attached to field controller, you need to detach
it before you can fix the utility hook.
Turn over the field controller.
controller and fasten it.
)
Preparation• Remove the old display foil.
On delivery, the display of the CS is covered by a foil to protect the display against
scratches and dirt and to guarantee a trouble-free function of the touchscreen in
extreme and humid weather conditions. We strongly recommend to use this display
foil and to replace it, if necessary.
• Ensure that the display is free of dust and grease.
• Use the provided microfibre cloth to clean the display.
• Look for a dust free and dry atmosphere surrounding while fixing the display foil.
The recommended conditions are:
Temperature:approx. 21°C
Humidity:< 55%
CS20, Operation
24
Fixing the display
2b
3
4
8
9a
2a
9b
5s = OFF
1
7b
7a
6a
6b
5b
5a
008506_001
foil step-by-step
The display foil lies between two thin carrier foils. The display foil has a silver-coloured
sticker to peel away the carrier foil from the actual display foil.
2
1
004510_001
StepDescription
1.Touch the yellow-coloured sticker with two fingers and pull it slowly
upwards. The carrier foil is peeling away.
)
Do not peel the carrier foil more than 2 cm - 3 cm away.
2.Fix the adhesive underside of the display foil on the display edge.
Peel away the carrier foil slowly and smooth it out gently onto the display.
3.Remove the additional layer foil which has a red-coloured sticker.
4.Potential air bubbles between display and display foil have to be smoothed
out using the included microfibre cloth.
)
Do not use sharp objects!
5.In case of remaining dust or grease under the display foil or the need to
replace the display foil, lift it again with some adhesive tape.
4.1.5Inserting and Removing a SIM Card
Insert and Remove
a SIM Card Step-bystep
3
4
CS20, Operation
Description
)
)
1.Switch off the field controller.
Inserting/removing the SIM card while the CS20 is turned on can result in
permanent damage to the card. Only insert/remove the SIM card when the
CS20 is switched off.
The SIM card is inserted into a slot inside the battery compartment.
25
Description
3
2b
2a
4
008507_001
2.Push the slide fastener of the battery compartment in the direction of the
arrow with the open-lock symbol.
Remove the cover from the battery compartment.
3.Remove the battery from the battery compartment.
4.Bend up the flap that covers the SIM card holder.
5.Push the SIM card holder in the direction of the OPEN arrow and flip it up.
6.Place the SIM card into the SIM card holder, the chip facing the connectors
inside the slot - as shown beside the SIM card holder.
7.Press the SIM card holder down and push the SIM card holder in the direction
of the LOCK arrow to close.
8.Bend down the flap again and reinsert the battery.
9.Attach the cover of the battery compartment. Push the slide fastener of the
battery compartment in the direction of the arrow with the closed-lock
symbol.
4.1.6Setting up for Usage of Long Range Bluetooth Expansion Pack CTR20
Attaching the
CTR20 Step-by-step
This section does only apply to the models CS20 3.75G, CS20 3.75G DISTO and
CS20 CDMA DISTO.
)
The CTR20 is not available in EU countries due to the directions of
EN 300 328 V.1.8.1!
1a
1b
CS20, Operation
)
Step Description
1.Loosen the screws of the expansion cover and detach the cover from the field
When the expansion cover or expansion pack are detached from the field
controller, the IP68 protection does not apply! Look for a dry and dust free
atmosphere when detaching the expansion cover or the expansion pack.
controller.
26
Step Description
2.
3.Tighten the screws of the expansion pack with the supplied allen key.
4.Attach the GAT25 antenna to the expansion pack.
)
Attach the CTR20 expansion pack to the field controller.
)
4.1.7Connecting to a Personal Computer
Check the position of the contacts in the inner surface of the field
controller.
Using a rotating movement makes it easier to attach the antenna,
especially at low temperatures.
Install Leica USB
drivers
StepDescription
1.Start the PC.
2.Insert the Leica USB card.
3.Run the SetupViva&GR_USB_XX.exe to install the drivers necessary for
Leica Nova devices. Depending on the version (32bit or 64bit) of the operating system on your PC, you have to select between the three setup files
following:
• SetupViva&GR_USB_32bit.exe
• SetupViva&GR_USB_64bit.exe
• SetupViva&GR_USB_64bit_itanium.exe
4.The Welcome to InstallShield Wizard for Leica Viva & GR USB drivers
)
window appears.
)
5.Next>.
6.The Ready to Install the Program window appears.
7.Install. The drivers will be installed on your PC.
9.Check I have read the instructions and click Finish to exit the wizard.
The setup has to be run only once for all Leica Nova devices.
Ensure that all Leica Nova devices are disconnected from your PC
before you continue!
For PCs with Windows Vista or Windows 7/Windows 8 operating
system: If not already installed, Windows Mobile Device Center will
be installed additionally.
CS20, Operation
27
Connect USB cable
to PC for the first
time step-by-step
3
4
2
008508_001
StepDescription
1.Start the PC.
2.Plug the GEV234 cable into the field controller.
3.Turn on the field controller.
4.Plug the GEV234 cable into the USB port of the PC. The Found New Hard-ware Wizard starts up automatically.
5.Check Yes, this time only. Next>.
6.Check Install the software automatically (Recommended). Next>. The
software for Remote NDIS based LGS CS Device will be installed on your
PC.
7.Finish.
8.The Found New Hardware Wizard starts up automatically a second time.
9.Check Yes, this time only. Next>.
10.Check Install the software automatically (Recommended). Next>. The
software for LGS CS USB Device will be installed on your PC.
11.Finish.
CS20, Operation
28
Connect to PC via
3
2
4
008500_001
USB cable step-bystep
StepDescription
1.Start the PC.
2.Plug the GEV234 cable into the field controller.
3.Turn on the field controller.
4.Plug the GEV234 cable into the USB port of the PC.
4.1.8Enabling WLAN in Windows EC7
Enabling WLAN
Step-by-step
StepDescription
)
1.In order to minimise Leica Captivate, press Fn and Home.
2.Select Start\Settings\Network and Dial-Up Connections.
3.In the Network Connections window:
By default, the WLAN module is disabled to save battery power.
Tap the TIWLNAPI1 icon and select File\Enable.
OR
Hold the stylus on the TIWLNAPI1 icon. Select Enable from the context
menu.
CS20, Operation
29
4.2Batteries
2
3
4a
4b
5a
1
5b
008509_001
4.2.1Operating Principles
First-time use /
Charging batteries
Operation /
Discharging
• The battery must be charged prior to using it for the first time.
• The permissible temperature range for charging is between 0°C to +40°C/ +32°F to
+104°F. For optimal charging, we recommend charging the batteries at a low
ambient temperature of +10°C to +20°C/+50°F to +68°F if possible.
• It is normal for the battery to become warm during charging. Using the chargers
recommended by Leica Geosystems, it is not possible to charge the battery if the
temperature is too high.
• For Li-Ion batteries, a single refreshing cycle is sufficient. We recommend carrying
out a refreshing cycle when the battery capacity indicated on the charger or on a
Leica Geosystems product deviates significantly from the actual battery capacity
available.
• The batteries can be operated from -30°C to +60°C/-22°F to +140°F.
• Low operating temperatures reduce the capacity that can be drawn; high operating
temperatures reduce the service life of the battery.
4.2.2Changing the Battery
Insert and remove
the battery step-bystep
CS20, Operation
StepDescription
)
1.Push the slide fastener in the direction of the arrow with the open-lock
2.Remove the cover from the battery compartment.
3.Pull the battery from the battery compartment.
4.Place the battery into the battery compartment with the arrow facing to the
5.Attach the cover of the battery compartment. Push the slide fastener of the
Turn over the field controller.
symbol.
)
top.
battery compartment in the direction of the arrow with the closed-lock
symbol.
Ensure that no water enters the battery compartment. IP68 applies
only with the battery compartment closed.
30
4.2.3Charging the Battery
1b
GEV276
GEV219
1b
1a
1a
008512_001
Charge the Battery
inside the CS20:
Step-by-step
)
StepDescription
1.Connect the GEV276 power adapter or GEV219 with the field controller.
2.The power LED on the CS field controller switches on. While charging, the
Please note: Charging functionality is not available for
CS20 field controller (823 164).
power LED flashes. When the field controller’s battery is fully charged the
Power LED is green.
)
Refer to LED Indicators for detailed information about the power
LED.
4.3Power Functions
Turning field
controller on
Turning field
controller off
Menu “Power Down
Options”
Press and hold power key () for 2 s.
)
Press and hold power key () for 5 s.
)
Press and hold power key () for 2 s to open Power Down Options menu.
)
OptionDescription
Power down and turn offTo turn the field controller off.
Put into stand-byTo put the field controller into stand-by mode.
Reset hardwarePerform one of the following options:
The field controller must have a power supply.
The field controller must be on.
The field controller must be on.
• Restart hardware
The device powers down and restarts.
• Reset Windows EC7The device powers down
and restarts. Any Bluetooth pairings are deleted.
• Reset Leica Captivate
The device powers down and restarts. All working
styles, dial-up lists and server lists are deleted.
Jobs, code lists, coordinate systems etc. are not
deleted.
• Reset Windows EC7 and Leica CaptivateThe
device powers down and restarts. Bluetooth pairings, working styles, dial-up lists and server lists
are deleted.
CS20, Operation
31
4.4Working with the Memory Device
3
2b
2a
1b
1a
4.4.1Working with the SD Card
)
)
Insert and Remove
the SD Card Stepby-step
• Keep the card dry.
• Use it only within the specified temperature range.
•Do not bend the card.
• Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage
to the card.
008502_001
StepDescription
)
1.Push the slide fastener of the connector cover in the direction of the arrow
2.Hold the card with the contacts facing the slot. Slide the card firmly into the
3.
4.Close the connector cover. Push the slide fastener of the battery compart-
The SD card can be inserted into a slot behind the connector cover.
with the open-lock symbol. Open the connector cover.
slot until it clicks into position.
)
)
ment in the direction of the arrow with the closed-lock symbol.
Do not force the card into the slot.
To release the card from the slot, gently press the top of the card.
The card pops out and you can remove it from the slot.
CS20, Operation
32
4.4.2Working with a USB Memory Stick
2
1b
1a
Insert a USB Stick
Step-by-step
008504_001
StepDescription
)
1.Push the slide fastener of the connector cover in the direction of the arrow
2.Insert the USB stick into the USB A host port.
The USB stick can be inserted into a slot behind the connector cover.
with the open-lock symbol. Open the connector cover.
4.5Using the Digital Camera
OverviewThe field controller is equipped with a digital camera and a flash light, both located at
the underside. Mounting a hand strap or pole holder plate does not limit the camera
view.
You can start the camera application from within Leica Captivate.
Taking a Picture
Step-by-step
StepDescription
)
1.
2.Aim the camera to the desired target.
3.Check the view at the display.
4.Press the OK key or click Capture to take a picture.
5.Press OK again or click Store to store the picture.
6.Press F2 or F3 to store the picture with a link. Follow the instructions on the
To be able to start the camera application, Leica Captivate has to be open.
Press the Camera key .
The screen Capture Image with Camera is displayed.
The picture is displayed in the
)
An info screen is displayed where you can choose to save the picture with
a link to a point, line or area.
screen.
Press F4 to store the picture without a link.
Press F6 to return to the Image Viewer without storing the picture.
After storing the picture, the
displayed again.
Capture changes to Store.
Image Viewer.
Capture Image with Camera
screen is
CS20, Operation
33
4.6Using the Camera Flash Light as Torch
Using the Flash
Light as Torch
You can use the flash light of the camera as torch.
To put the flash light on/off, hold and press .
CS20, Operation
34
5Care and Transport
5.1Transport
Transport in a road
vehicle
ShippingWhen transporting the product by rail, air or sea, always use the complete original
Shipping, transport
of batteries
Never carry the product loose in a road vehicle, as it can be affected by shock and
vibration. Always carry the product in its transport container, original packaging or
equivalent and secure it.
Leica Geosystems packaging, transport container and cardboard box, or its equivalent,
to protect against shock and vibration.
When transporting or shipping batteries, the person responsible for the product must
ensure that the applicable national and international rules and regulations are
observed. Before transportation or shipping, contact your local passenger or freight
transport company.
5.2Storage
ProductRespect the temperature limits when storing the equipment, particularly in summer if
the equipment is inside a vehicle. Refer to "6 Technical Data" for information about
temperature limits.
Li-Ion batteries• Refer to "Technical Data" for information about storage temperature range.
• Remove batteries from the product and the charger before storing.
• After storage recharge batteries before using.
• Protect batteries from damp and wetness. Wet or damp batteries must be dried
before storing or use.
• A storage temperature range of 0°C to +30°C / +32°F to +86°F in a dry environment
is recommended to minimize self-discharging of the battery.
• At the recommended storage temperature range, batteries containing a 30% to
50% charge can be stored for up to one year. After this storage period the batteries
must be recharged.
5.3Cleaning and Drying
Product and accessories
Damp productsDry the product, the transport container, the foam inserts and the accessories at a
Cables and plugsKeep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting
CS20, Care and Transport
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or pure alcohol. Do not use other liquids; these may attack the polymer
components.
temperature not greater than 40°C/104°F and clean them. Remove the battery cover
and dry the battery compartment. Do not repack until everything is dry. Always close
the transport container when using in the field.
cables.
35
Connectors with
dust caps
DISTO Window
Wet connectors must be dry before attaching the dust cap.
008590_001
CS20, Care and Transport
36
6Technical Data
49 mm
284 mm
150 mm
008595_001
6.1CS20 Technical Data
DesignPolymer housing with optional integrated battery and radio modem.
Control Unit
Dimensions
Display:5", WVGA (800 x 480 pixels),
graphics capable LCD, illumination, touch screen, colour
Keyboard:67 keys including 12 function keys
Touch technology:Resistive
Sound:Integrated sealed speaker and microphone
Digital camera:Resolution: 2592 x 1944 pixels, 5 MP, fixed focus lens, image
capture: JPEG, flash
DISTO:Range: 150 m
Accuracy: ±1 mm + 0.2 mm/m
Resolution of view finder camera: 1600 x 1200 pixels, 2 MP
Weight
TypeWeight [kg]/[lbs]
CS201.095/2.414
CS20 3.75G1.175/2.590
CS20 3.75G/CDMA DISTO1.215/2.678
Memory DevicesData can be stored on the SD card, USB stick or in the internal memory.
Power
TypeConsumption [A]External supply voltage
CS202.5Nominal voltage: 15 V DC ()
Voltage range: 10.5 V DC to 18.0 V DC
Minimum voltage for charging: 14 V DC ()
Internal Battery
TypeBattery Voltage CapacityOperating time, typical*
CS20Li-Ion11.1 VGEB331: 2.8 Ah8 h
* Operating time depends on use of wireless communication devices.
CS20, Technical Data
37
Environmental
specifications
Temperature
TypeOperating temperature [°C]Storage temperature [°C]
CS20-30 to +60-40 to +80
Internal
battery
Protection against water, dust and sand
TypeProtection
CS20IP68 (IEC60529)
Humidity
TypeProtection
CS20Up to 95 %
-30 to +60-40 to +70
Dust tight
Protected against continuous immersion in water (tested for 2 hours in
1.40 m depth).
)
The effects of condensation are to be effectively counteracted by periodically drying out CS20.
CS20 is in compliance with IP68 only when expansion cover,
connector cover and battery cover are closed.
Interfaces
Data format for
RS232
Ports
TypeRS232USB HostUSB ClientBluetoothWLAN
CS20LEMO portUSB2.0 Host (A) LEMO USB client
(high-speed)
The default values are:
Baud rate:115200
Parity:None
Terminator:CR/LF
Data bits:8
Stop bits:1
Type8 pin LEMO-1USB2.0 Host (A) LEMO USB client (high-speed)
CS20For power and/or
communication
For communication
Class 1802.11b/g/n
6.2CTR20 Technical Data
Description and useThe CTR20 is a high performance wireless data transfer device operating in the
2.4 GHz frequency band. The CTR20 can be used on CS20 controller only for communication to a total station with RH16/RH17 or TCPS29/TCPS30 attached.
Dimensions
Connector4 pin interface port
Weight80 g / 2.82 oz
CS20, Technical Data
TypeLength [m] Width [m]Thickness [m]
CTR200.0860.0780.027
38
Power
TypeCTR20
Power consumption150 mA nominal (5 V), 200 mA max.
Power supplyFrom instrument
Environmental
Specifications
Temperature
Operating temperature [°C]Storage temperature [°C]
-30 to +60-40 to +80
Protection against water, dust and sand
Protection
IP68 (IEC 60529)
Dust tight
Protected against continuous immersion in water (tested for 2 hours in 1.40 m
depth)
Humidity
Protection
Up to 95 %
The effects of condensation are to be effectively counteracted by periodically drying
out the CTR20.
6.3Conformity to National Regulations
Conformity to
national regulations
For products which do not fall under R&TTE directive:
Hereby, Leica Geosystems AG, declares that the product/s is/are in compliance
with the essential requirements and other relevant provisions of the applicable European Directives. The declaration of conformity can be consulted at
http://www.leica-geosystems.com/ce.
6.3.1CS20
Conformity to
national regulations
• FCC Part 15, 22, 24 (applicable in US)
• Hereby, Leica Geosystems AG, declares that the product CS20, AS10 is in compli-
ance with the essential requirements and other relevant provisions of Directive
1999/5/EC and other applicable European Directives. The declaration of conformity
can be consulted at
http://www.leica-geosystems.com/ce.
• The conformity for countries with other national regulations not covered by the FCC
part 15 or European directive 1999/5/EC has to be approved prior to use and operation.
• Japanese Radio Law and Japanese Telecommunications Business Law Compliance.
– This device is granted pursuant to the Japanese Radio Law and the Japanese
– This device should not be modified (otherwise the granted designation number
Class 1 equipment according European Directive 1999/5/EC (R&TTE) can be
placed on the market and be put into service without restrictions in any EEA
member state.
• Hereby, Leica Geosystems AG, declares that the product CTR20 is in compliance
with the essential requirements and other relevant provisions of Directive
1999/5/EC and other applicable European Directives. The declaration of conformity
can be consulted at
http://www.leica-geosystems.com/ce.
Class 1 equipment according European Directive 1999/5/EC (R&TTE) can be
placed on the market and be put into service without restrictions in any EEA
member state.
• The conformity for countries with other national regulations not covered by the FCC
part 15 or European directive 1999/5/EC has to be approved prior to use and operation.
• Japanese Radio Law and Japanese Telecommunications Business Law Compliance.
– This device is granted pursuant to the Japanese Radio Law and the Japanese
Telecommunications Business Law.
– This device should not be modified (otherwise the granted designation number
This product contains software that is preinstalled on the product, or that is supplied
to you on a data carrier medium, or that can be downloaded by you online according
to prior authorisation from Leica Geosystems. Such software is protected by copyright
and other laws and its use is defined and regulated by the Leica Geosystems Software
Licence Agreement, which covers aspects such as, but not limited to, Scope of the
Licence, Warranty, Intellectual Property Rights, Limitation of Liability, Exclusion of
other Assurances, Governing Law and Place of Jurisdiction. Please make sure, that at
any time you fully comply with the terms and conditions of the Leica Geosystems Software Licence Agreement.
Such agreement is provided together with all products and can also be referred to and
downloaded at the Leica Geosystems home page at http://www.leicageosystems.com/swlicense or collected from your Leica Geosystems distributor.
You must not install or use the software unless you have read and accepted the terms
and conditions of the Leica Geosystems Software Licence Agreement. Installation or
use of the software or any part thereof, is deemed to be an acceptance of all the
terms and conditions of such Licence Agreement. If you do not agree to all or some
of the terms of such Licence Agreement, you must not download, install or use the
software and you must return the unused software together with its accompanying
documentation and the purchase receipt to the distributor from whom you purchased
the product within ten (10) days of purchase to obtain a full refund of the purchase
price.
Open source information
The software on the product may contain copyright-protected software that is
licensed under various open source licences.
Copies of the corresponding licences
• are provided together with the product (for example in the About panel of the soft-
ware)
• can be downloaded on http://opensource.leica-geosystems.com
If foreseen in the corresponding open source licence, you may obtain the corre-
sponding source code and other related data on http://opensource.leica-geosystems.com.
Contact opensource@leica-geosystems.com in case you need additional information.
CS20, Software Licence Agreement
42
Appendix APin Assignments and Sockets
A.1CS20
DescriptionSome applications require knowledge of the pin assignments for the instrument ports.
In this chapter, the pin assignments and sockets for the instrument ports are
explained.