Page 1
CM1950
Cryostat
Supplemental Sheet to the Instructions for Use CM1950 1v8 Rev. I
English
Revision C
Always keep this document with the instrument.
Read carefully before working with the instrument.
Version 1.1, Revision C - 07.2018
Page 2
Page 3
3
CM1950
Supplemental sheet to Instructions for Use CM1950 1v8 Rev. I
1
1. Supplemental sheet to Instructions for Use CM1950 1v8 Rev. I
Additional description to Chapter 12.3 Replacing the UVC lamp
Note
For the CM1950, two different variants of the connection piece inside the instrument and the UVCLamp are available. The user needs to check which variant is built-in in the instrument prior to the
exchange of the UVC-Lamp with a new one.
The procedure to exchange the UVC-Lamp is similar with both variants.
Identifying the built-in variant and matching UVC lamp
L Variant 1: Connection piece with 2-pin inlet (→ Fig. 1-1), UVC lamp 2-pin (→ Fig. 1-2)
1
2
Fig. 1
L Variant 2: Connection piece with 4-pin inlet (→ Fig. 2-1), UVC lamp 4-pin (→ Fig. 2-2)
1
2
Fig. 2
Page 4
4
Version 1.1, Revision C
Supplemental sheet to Instructions for Use CM1950 1v8 Rev. I
1
Additional information to Chapter 12.3 Replacing the UVC lamp
New Fig. 95
Fig. 3
UV fluorescent tube - 2-pin
Order No. 14 0477 43192
New Fig. 96
Fig. 4
UV fluorescent tube - 4-pin
Order No. 14 0471 57385
Page 5
Page 6
www.LeicaBiosystems.com
Version 1.1, Revision C - 07.2018
Leica Biosystems Nussloch GmbH
Heidelberger Str. 17 - 19
D-69226 Nussloch
Germany
Tel.: +49 - (0) 6224 - 143 0
Fax: +49 - (0) 6224 - 143 268
Web: www.LeicaBiosystems.com
Loading...