Leica Geosystems 887900 User manual

Leica DISTOTM S910

The original laser distance meter

Leica DISTOTM S910

The original laser distance meter

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

ENTable of Contents

Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2

Introduction- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
Basic measuring screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
Selection screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Icons on Status bar - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Charging the Li-Ion battery via USB - - - - - - - - - - - - - - - - - - - - - 5
Using the Smart Base - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
Using the Smart Base Extension - - - - - - - - - - - - - - - - - - - - - - - 6

Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

Using the Touch Screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Message Codes- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Permanent / Minimum-Maximum measuring - - - - - - - - - - - - - - - 8
Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
Screenshot- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
Memory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
Tilt units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
Move Alert of Levelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
Distance units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
Beep ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Digital level ON/OFF- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
De-/Activate keylock - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Switch on with keylock - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Bluetooth® /WLAN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
Calibration of tilt sensor (Tilt Calibration) - - - - - - - - - - - - - - - - 17
Personalized favorites- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
Illumination - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
Touch Screen ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
Date and Time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
Compass Adjustment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
Offset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
Reset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
Information/Software Update - - - - - - - - - - - - - - - - - - - - - - - 21

Functions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22

Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
Calculator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23
Smart Horizontal Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - 23

Smart Angle measurement - - - - - - - - - - - - - - - - - - - - - - - - - - 24
Level - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
Measuring single distance - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
Point to point measurements - - - - - - - - - - - - - - - - - - - - - - - - 26
DXF data capture- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
Photo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
Volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29
Smart Area measurement- - - - - - - - - - - - - - - - - - - - - - - - - - - 30
WLAN data transmission - - - - - - - - - - - - - - - - - - - - - - - - - - - 31
Gallery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 32
Area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 33
Sloped objects - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 34
Width - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 35
Timer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 36
Triangular area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 37
Height-profile measurement - - - - - - - - - - - - - - - - - - - - - - - - - 38
Diameter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39
Adjusting measuring reference- - - - - - - - - - - - - - - - - - - - - - - - 40
Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 41
Height tracking- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 42
Area from Photo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 43
Compass - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 44
Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 45
Trapezium - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 46
Stake out - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 47

Technical Data- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 48
Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 49
Care - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 49
Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50
Safety Instructions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50

Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50
Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50
Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50
Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 51
Disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 51
Electromagnetic Compatibility (EMC) - - - - - - - - - - - - - - - - - - - 51
FCC statement (applicable in U.S.) - - - - - - - - - - - - - - - - - - - - - 51
Déclaration FCC, applicable aux Etats-Unis - - - - - - - - - - - - - - - 52
Use of the product with Bluetooth
Laser classification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 53
Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 53

®

- - - - - - - - - - - - - - - - - - - - 53

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

1

ENInstrument Set-up

Display

On/Measure

Pointfinder

(Viewscreen)

Navigation

Clear / Off

Selection keys
linked to symbols
above

Enter / Equal

Function screen

Add / Subtract

Introduction

The safety instructions and the user manual should be read
through carefully before the product is used for the first time.

The person responsible for the product must ensure that all
users understand these directions and adhere to them.

The symbols used have the following meanings:

WARNING

Indicates a potentially hazardous situation or an unintended use
which, if not avoided, will result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation or an unintended use
which, if not avoided, may result in minor injury and/or appreciable
material, financial and environmental damage.

Important paragraphs which must be adhered to in practice as

i

they enable the product to be used in a technically correct and
efficient manner.

Overview

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

2

ENInstrument Set-up

Status bar

Favorites

Main line

Active function

Tap here to start

ON/DIST in a dis-

tance function

FUNC

Settings

Function /

Settings

Help function

Basic measuring screen

Selection screen

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

3

ENInstrument Set-up

1x

24.210

m

Zoom stage

Favorites

Illumination

adjustment

with navigation

keys left and

right

Active function

Zoom with
navigation keys
up and down

Crosshair

Spread 2 fingers apart to zoom

on the touch screen

Scroll up and down for further results

Battery power

Bluetooth

®

is switched on

Bluetooth

®

connection established

Device is not leveled

Offset is activated and subtracts the defined value from measured distance

Offset is activated and adds the defined value from measured distance

WLAN client mode activated

DISTO™ connected as client to WLAN

Zoom

Device is leveled

DISTO™ WLAN hotspot activated

Other device connected to DISTO™ WLAN hotspot

Device is measuring

Measuring reference

Device was moved after leveling - affects measuring accuracy

Pointfinder (Viewscreen)

Leica DISTOTM S910 808167a

Icons on Status bar

4

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

Charging the Li-Ion battery via USB

4

h

Charging Fully charged

i

Charge batteries when battery symbol is flashing.
While charging, the device may heat up. This is normal and should
not affect the device’s lifespan or performance. If the battery gets
hotter than 40°C / 104°F, the charger stops.
At a recommended storage temperature of -20°C to +30°C

(-4°F to +86°F), batteries containing a 50% to 100% charge can
be stored up to 1 year. After this storage period the batteries
must be recharged.
To save energy, unplug the charger when not in use.

Charge the battery before using it for the first time. Use the
provided cable to charge the battery.

Plug the small end of the cable into the port of the device, and plug
the end of the charger into an electrical socket. Select the appro­priate connector for your country. The de vice can no t be used w hi le
it is charging.

The computer can also be used to charge the device, but this takes
more time. If the device is connected to the computer via USB
cable, you can download or delete the gallery. It is not possible
to upload any data.

When you charge the battery, the following icons show the status:

ENInstrument Set-up

CAUTION

Connecting the charger improperly may cause serious damage
to the device. Any damage caused by misuse is not covered by
the warranty. Use only Leica-approved chargers, batteries, and
cables. Unapproved chargers or cables can cause the battery
to explode or damage the device.

If the device is connected to the computer via USB cable, you
can download or delete the gallery. It is not possible to upload
any data.

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

5

Using the Smart Base

Unlock
Lock

Tripod or

Adapter thread

Fold out Smart Base.
Use it as mini tripod.

The Smart Base Extension
allows for stable targeting
without unintentionally tilt­ing the device..

i

Do not move or tilt the Smartbase during measuring.

We recommend the use of a tripod with the Leica
FTA360-S adapter.

Using the Smart Base Extension

ENInstrument Set-up

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

6

Operations

i

Use only fingers to use the touch screen.
Do not allow the touch screen to come into contact with other elec­trical devices.
Electrostatic discharges can cause the touch screen to malfunction.
Do not allow the touch screen to contact water. The touch screen
may malfunction in humid conditions or when exposed to water.
To avoid damaging the touch screen, do not tap it with anything sharp
or do not apply excessive pressure to it with your fingertips.

Tapping

Tap on the display to open an on­screen button or to make a selection.
Tapping on the icon in the middle of
the bottom line activates the distance
measurement or triggers the camera.

Dragging

Drag on the display to move to previous
or to next screen in the galerie function.

Pinching

Spread 2 fingers apart to zoom if

pointfinder is activated

.

i

Instead of using
the touch
screen, the nor­mal keypad but­tons can be
used also.

Using the Touch Screen

ENOperations

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

7

Switching ON/OFF Clear Message Codes

ON

OFF

2 sec

Device is turned
OFF.

i

If no key is
pressed for 180
sec, the device
switches off au­tomatically.

1x

Undo last action.

2x

Leave actual func­tion, go to default
operation mode.

If the info icon appears with a
number, observe the instructions in
section "Message Codes".
Example:

1

2 sec

8.532 m

Used to measure room diagonals (maximum val­ues) or horizontal distance (minimum values)

The minimum and maximum dis­tance measured is displayed (min,
max.). The last value measured is
displayed in the main line.

min.

max.

2

Stops permanent / minimum­maximum measuring.

3

7.332 m

1

The next meas­urement is added
to the previous
one.

2

The next meas­urement is sub-
tracted from the
previous one.

2x

7.332 m

12.847 m

3

20.179 m

4

i

This process can be repeated as
required. The same process can
be used for adding or subtracting
areas or volumes.

Permanent / Minimum-Maximum measuring

Add / Subtract

ENOperations

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

8

Pointfinder (Viewscreen)

1x

0.00

m

1

OV

*

1x

2x

4x

2

1x

0.00

m

3

Exit pointfinder
(viewscreen).

4

i

This is a great help for outdoor measuring. The integrated
pointfinder (viewscreen) shows the target on the display.
The device measures in the middle of the cross hair, even if
the laser dot is not visible.
Parallax errors occur when the pointfinder camera is used
on close targets, with the effect that the laser appears dis­placed in the crosshair. In this case the error is automatically
corrected with a shift of the crosshair.

* OV = Overview

1x

0.00

m

1

2 sec

Screenshot photo is saved in gallery.

Screenshot

ENOperations

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

9

Memory

8.449 m

8

.4

4

9

m

1

Take over value for
further actions.

Delete memory.

2

Use Up/Down
navigation keys to
show more detailed
results of the speci­fic measurement.

3

Use Left/Right
navigation keys to
switch between
measurements.

i

Pointfinder needs to be
switched off.

ENOperations

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

10

Overview

1

2

Move Alert

WLAN / Bluetooth

®

Digital level

Keypad lock
Illumination

Favorites

Compass adjustment
Touch screen

Reset
Information/Software Update

Beep

Tilt calibration

Distance units

Offset

Date and Time

Tilt units

1

2

360.0°

± 180.0°

± 90.0°

0.00 %

0.0 mm/m

0.00 in/ft

Switch between the
following units:

3

4

Confirm setting.

Exit settings.

5

Tilt units

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

11

Move Alert of Levelling

123

Choose the sensitivity of the levelling, which is
needed for some measuring functions.
FINE means, that the levelling of the device is sen­sitive to any small vibrations.
Choose ROUGH when working in harsh con­struction environment with many shocks and vi­brations. In this case the accuracy is decreased in
correlation with the movements.

4

Confirm setting.

5

Exit settings.

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

12

Distance units

1

2

0.00 m

0.000 m

0.0000 m

0.0 mm

0.00 ft

0.00 in
0 in 1/32
0'00" 1/32

0.00 m

0.000 m

0.0000 m

0.0 mm

0.00 ft

0

'00"

1/32

0

'00"

1/16

0

'00"

1/8

0

'00"

1/4

0.00 in

0 in 1/32

0 in 1/16

0 in 1/8

0 in 1/4

0.000 yd

Art. No. 805080:

3

US-Model Art. No. 808183:

Switch between
the following
units:

4

Confirm setting.

Exit settings.

5

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

13

Beep ON/OFF

1ON2

To switch ON,
repeat procedure.

OFF

Exit settings.

3

1ON2

To switch ON,
repeat procedure.

OFF

Exit settings.

3

i

The digital level
is displayed in
the status bar.

1

OFF

2

To deactivate, repeat
procedure. The keylock
is active if device is
switched off.

ON

Exit settings.

3

1

within

2 sec

2

Digital level ON/OFF

De-/Activate keylock Switch on with keylock

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

14

Bluetooth® /WLAN

1

ON

OFF

F

2

OFF

Explanation see
info box below.

Special Settings for
data transfer.

Exit settings.

3

i

Bluetooth®/WLAN is switched
on and black Bluetooth®/WLAN
icon is displayed in status bar.
If connection is established the
color of the icon changes to blue.

i

Special Bluetooth® Settings

Figure Mode: Use this mode if the data needs to be transferred in
figures, e.g. working with spread sheets. Ft/in fractional is converted
into ft/in decimal. An additional press on the Bluetooth

®

Settings Icon

allows further adjustments for data transfer.

Text Mode: Use this mode if the data needs to be transferred as text,
e.g. working with word processing programs.

App Mode: Use this mode to transfer the data using an App.
Special properties: ENCRYPTED is the default setting. In case of trou­ble with data transfer, select mode UNENCRYPTED.

Allows the arrow keys to move the cursor on your computer.

sends the value of the main line to the computer.

Allows the arrow keys to move the cursor on your computer.

sends the value of the main line to the computer.

Device is connected. Favorites disappear and two softkeys appear:

Device is connected. Favorites disappear and two softkeys appear:

i

Special WLAN Settings

Available WLAN network can be choosen with
the possibility to enter a password.
Recommended for GIS applications.

WLAN: DISTO™ acts as hotspot.
Data transfer unsecured or secured with serial
number as password. Recommended for stand­ard use.

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

15

ENSettings

i

Connect the device with your smart phone, tablet, laptop,…
The actual measurement is transferred automatically if Blue­tooth

®

connection is established. To transfer a result from
the main line, press =. Bluetooth® switches off as soon as the
laser distance meter is switched off.

We provide no warranty for free DISTO

™

software and of­fer no support for it. We accept no liability whatsoever
arising from the use of the free software and we are not
obliged to provide corrections nor to develop upgrades. A
wide range of commercial software can be found on our
homepage. Apps for Android

®

or Mac iOS can be found in
special internet shops.
For more details, see our homepage.

The efficient and innovative Bluetooth

®

Smart module
(with the new Bluetooth® standard V4.0) works together
with all Bluetooth® Smart Ready devices. All other Blue­tooth

®

devices do not support the energy saving Blue-

tooth® Smart Module, which is integrated in the device.

Bluetooth

®

data transfer

i

Only data from the function Point Data transmission can be
transferred with WLAN. A corresponding program is need­ed to receive the data, e.g. DISTO

™

transfer.

For more details, see our homepage.

WLAN data transfer

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

16

Calibration of tilt sensor (Tilt Calibration)

123

Place device on absolutely flat surface.

180°

4

180°

5

Turn the device horizontally by 180°
and place it again on absolutely flat
surface.

6

7

Place device on absolutely flat surface.

180°

8

180°

9

Turn the device horizontally by 180°
and place it again on absolutely flat
surface.

10

i

After 2 sec
the device
goes back to
the basic
mode.

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

17

Personalized favorites

1

Favorite

2

3

Select favorite
function.

4

Press selection
key left or right.
Function is set as
favorite above the
corresponding se­lection key.

i

Select your favorite functions for
quick access.

Short cut:
Press 2 sec on a selection-key in
the measuring mode. Select your
favorite function and press again
short on the corresponding se­lection key.

1

1/6

2

1/6
2/6

3/6

4/6
5/6
6/6

3

Select brightness.

4

Confirm setting.

Exit settings.

5

i

To save
power re­duce bright­ness if not
necessary.

1

OFF

2

To deactivate, repeat
procedure.

ON

Exit settings.

3

Illumination

Touch Screen ON/OFF

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

18

Date and Time

1

2

00 : 00

3

Set time
(hh:mm)

2013-04-08

4

Set date
(yyyy-mm-dd)

Exit settings.

5

i

Depending on your geographic location, the angle of declination may vary from
other locations, as the geographic and magnetic poles are aligned. However, if the
reference location is not selected, the difference in declination between the poles
can differ greatly. For best results, select the nearest geographic reference point
using the steps below.

Adjusting the magnetic declination

1

2

CH-Zürich

3

Select the nearest loca­tion and the device ad­justs the declination
accordingly.

4

Confirm

Back

Exit settings.

5

Compass Adjustment

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

19

Offset

1

2

1.012 m

3

Select digit.

1.012 m

4

Adjust digit.

5

Approve
value.

Exit settings.

6

i

An offset adds or subtracts a
specified value automatically to or
from all measurements. This func­tion allows tolerances to be taken
into account. The offset icon is
displayed.

1

2

Second confirmation with selection
keys:

3

Refuse:

Confirm:

Exit settings.

4

i

Reset returns the instrument to
the factory settings. All custom­ized settings and memories are
lost.

A HARDWARE-RESET is
done by pressing 15 sec on
ON/DIST key.

Reset

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

20

Information/Software Update

123

4

Connect the
device with
USB to your
computer.

5

Software updates with corre­spondent instructions can be
found on our homepage
www.disto.com.

i

Make sure that you use
always the newest soft­ware version.

ENSettings

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

21

Overview

Timer

WLAN data transmission

Smart Angle measurement

Level

Photo

DXF Folder

DXF data capture

Area

Height Tracking

Smart Horizontal Mode

Measuring on sloped objects

Pythagoras (2-point)

Volume

Calculator

Width

Stake out

Diameter

Trapezium

Gallery

Area from Photo

Adjusting measuring reference

Pythagoras (3-point)

Single Distance measurement

Point to point measurements

Smart Area measurement

Triangular area

Compass

Height-profile Measurement

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

22

Calculator

1

2

C/CE

=

3

Select key on
display.

Confirm every
key.

Use selection keys for
clear or result.

i

The measurement result from the
main line is taken over to the calcula­tor and can be used for further calcu­lations.
Ft/in fractions are converted into
ft/in decimal.
To take over a result from the calcu­lator in the basic mode press DIST
before leaving the calculator function.

1

2

Aim laser at
target.

3

z

x

y

40.8 °

x

y

z

5.204 m

0.032 m

4.827 m

4

(up to 360° and a transverse
tilt of ±10°)

Smart Horizontal Mode

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

23

Smart Angle measurement

1

213

Aim laser at point
on first wall.

4

2

5

Aim laser at corner.

6

3

7

Aim laser at point
on second wall.

1.246m

5.269m

D

D

89.56°

8

Continues distance and
angle measurement.

1

2

0.3°

90°

0°

3

i

Displays inclinations of 360° with a
transverse inclination of +/- 10°. In­strument beeps at 0° and 90°. Ideal
for horizontal or vertical adjustments.

Level

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

24

Measuring single distance

1

2

Aim active laser at target.

3

8.532 m

4

i

Target surfaces:
Measuring errors can occur when
measuring to colourless liquids,
glass, styrofoam or semi-permea­ble surfaces or when aiming at
high gloss surfaces. Against dark
surfaces the measuring time in­creases.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

25

Point to point measurements

1P12

Initialize
device for
vertical and
horizontal
values.
See "Level­ling".

1

3

Aim laser at first
target.

4

2

5

Aim laser at second
target.

13.207m

6

i

Level the device
and further
values are
displayed !

Do not move
Smart Base
after levelling!

-1.697

m

2.419

m

35.06°

2.995m

i

Level the device
to get more
measuring data.

Do not move
device after
levelling.

90°

90°

±5°

-1.697m

Rotate the device
two times clock­wise 90°. Follow
the instructions on
the display. Level­ling is finished when
OK icon appears
on the display.

For levelling,
Smart Base has
to be folded out
and device needs
to be in an incli­nation range of
+/-5°.

Check status
line:

indicates proper levelling

indicates insufficient levelling

indicates that smart base was tilt­ed and can affect measuring ac­curacy

Levelling

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

26

DXF data capture

1

90°

90°

±5°

-1.697m

2

Levelling is man­datory!
For levelling,
Smart Base has
to be folded out
and device
needs to be in
an inclination
range of +/-5°.

Check
status
line:

indicates proper levelling

indicates insufficient level­ling

Rotate the device
two times clockwise
90°. Follow the in­structions on the dis­play. Levelling is
finished when OK
icon appears on the
display.

Do not move device after levelling!

indicates that smart base was
tilted and can affect measur­ing accuracy

P

3

4

Aim at first point.

5

Aim at additional
points (max. 30)

6

Stops DXF
capture and
saves data.

7

Leave actual
function, go to
default opera­tion mode.

2x

i

Max. 20 DXF files can be generated (with 30 meas­uring points/photos each).

If pointfinder is switched on, the corresponding
photos are saved with a resolution of 300 x 400 dpi.

Do not forget to save your data!

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

27

Photo

11x2

OV

*

2x

3

Take photo.

4

Exit.

5

i

Tap on the camera icon in the mid­dle of the bottom line to take a pho­to.

For screenshots, press camera key
for 2 sec.

* OV = Overview

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

28

Volume

123

Aim laser at first
target point.

4

5

Aim laser at sec­ond target point.

6

7

Aim laser at third
target point.

2.431 m

2.338 m

5.744 m

32.653 m

3

First distance

Second distance

Third distance

Volume

8

16.164 m

39.300 m

2

13.430 m

2

9

Use Up/Down
navigation keys to
show more re­sults.

Ceiling/floor area

Wall areas

Circumference

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

29

Smart Area measurement

1

213

Aim at first point.

5.873m

4

1

1

2

3

4

5

5

Aim at additional points
(max. 30)

84.675

m

2

2.075

m

6

Point to Point distance between the last
two measured points

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

30

WLAN data transmission

1

90°

90°

±5°

-1.697m

2

For levelling,
Smart Base has
to be folded out
and device
needs to be in
an inclination
range of +/-5°.

Check
status
line:

indicates proper levelling

indicates insufficient levelling

Rotate the device
two times clockwise
90°. Follow the in­structions on the dis­play. Levelling is
finished when OK
icon appears on the
display.

Do not move device after levelling!

indicates that smart base was
tilted and can affect measur­ing accuracy

P

3

4

Aim laser at first
point.

13.207 m

5

WLAN data transfer
of point coordinates

with pointfinder photo

without pointfinder photo

6

Aim at additional
points.

Leave actual function, go to
default operation mode.

7

2x

i

If smart base is folded out, device sends x,y,z coordi­nates of measured point. If smart base is not folded
out, device sends only inclination and slope distance.
If WLAN is switched off, the device requests to
switch on WLAN.

Data transfer works only with WLAN.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

31

Gallery

11x2

1x

2013 - 07 - 03_13:25

201

1x

2013 - 07 - 03_13:25

03_13:25

- 03_

13:03- 07

25

1x

2013 - 07 - 03_13:25

3

Exit.

4

i

If the device is connected to the
computer via USB cable, you can
download or delete the gallery. It is
not possible to upload any data.

- 07 -

ENFunctions

:

Leica DISTOTM S910 808167a

32

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

Area

123

Aim laser at first
target point.

4

5

Aim laser at sec­ond target point.

20.276 m

3.9I0 m

6.228 m

24.352 m

2

First distance

Second distance

Circumference

Area

6

i

The result is shown in the main line and the
measured value above.
Partial Measurements / Painter function:
Press + or - before starting the first measure­ment. Measure and add or subtract distanc­es. Finish with =. Measure 2nd length.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

33

Sloped objects

123

Aim laser at upper
target point.

4

5

Aim laser at lower
target point.

11.00 °

-3.440 m

30.367 m

5.452 m

P2 distance

Vertical height be­tween both points

P2 angle

Distance between
both points

6

-4.230 m

39.10 °

7

Use Up/Down
navigation keys to
show more re­sults.

Horizontal distance
between both points

Included angle be­tween both points

i

Indirect distance measuring between 2 points with addi­tional results. Ideal for applications such as length and slope
of roof, height of chimneys,…
It is important, that the instrument is positioned in the
same vertical plane as the 2 measured points. The plane is
defined of the line between the 2 points. This means, that
the device on the tripod is only moved vertically and not
turned horizontally to reach both points.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

34

Width

1

-.--- m

1x

2

16.42m

3

It is absolutely
necessary to aim
with the laser per­pendicular to the
object.

OV

*

1x

2x

4x

4

If necessary, use the
Zoom for precise
aiming.

* OV = Overview

1x

16.42 m

5

Select arrows with the
cursor keys or by tapping
on the display and adjust
with softkeys. Corre­sponding width is calcu­lated.

Confirm
measurement.

6

16.42

m

27.539 m

7

Distance to object

Exit.

8

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

35

Timer

1

2

Off

30 sec
10 sec

2 sec

5 sec

3

Select release
time.

4

Confirm setting.

i

The self release
starts if
ON/Measure
key is pressed.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

36

Triangular area

123

Aim laser at first
target point.

4

5

Aim laser at sec­ond target point.

6

7

Aim laser at third
target point.

4.855 m

2

2.425 m

4.129 m

4.248 m

Triangular area

8

First distance

Second distance

Third distance

33.60°

10.802 m

9

Use Up/Down
navigation keys to
show more re­sults.

Circumference

Angle between first
and second
measurement

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

37

Height-profile measurement

1

2

REF

0

Aim at reference point (REF).

3

4

REF

1

0

2

3

4

5

h

d

Aim at additional points 1-x.

5

d

h

2.042 m

0.054 m

Horizontal distance to
device

Height difference to
reference point (REF).

6

Exit function.

7

2x

i

Ideal for measuring of height differences to a
reference point. Can be also used to meas­ure profiles and terrain sections. After meas­uring the reference point, the horizontal
distance and height is displayed for each fol­lowing point.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

38

Diameter

1

-.--- m

1x

2Ø3

Aim laser perpendicular
to the middle of the
round object.

OV

*

1x

2x

4x

4

If necessary, use the
Zoom for precise
aiming.

* OV = Overview

0.237 m

1x

5

Select arrows with the
cursor keys or by tapping
on the display and adjust
with softkeys. Corre­sponding diameter is cal­culated.

6

Confirm meas­urement.

0.237 m

0.744 m

0.044 m

2

7

More results are
displayed.

Circumference
Circular area

Exit.

8

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

39

Adjusting measuring reference

1

2

3

Distance is measured
from the rear of the de­vice (standard setting).

Distance is measured
from the front of the de­vice (lock symbol = per­manently).

i

The orienta­tion of the
Smart Base is
automatically
detected and
the zero point
is accordingly
adjusted.

4

Confirm setting.

i

If device is
switched off,
reference
goes back to
standard set­ting (rear of
the device).

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

40

Pythagoras (2-point)

123

Aim laser at first
target.

4

5

Aim laser at second
target.

13.207 m

21.383 m

25.133 m

6

i

The result is shown in the main line.
Pressing the measuring key for 2 sec in the function ac­tivates automatically Minimum or Maximum measure­ment.

We recommend to use the pythagoras only for indirect
horizontal measuring.
For height measuring (vertical) it is more precise to use
a function with the inclination measuring.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

41

Height tracking

1

2

P0

Px

Aim laser at lower point.

3

4

P0

Px

Aim laser at upper points and angle/
height tracking starts automatically.

5

x

y

P0

y

29.89 °

6.271 m

-10.55 °

3.475 m

P0

Px

z

6

= Tracking height if device is
turned on tripod

= Tracking angle if device is
turned on tripod

44.80 °

6.271 m

-10.55 °

8.478 m

7

Stops height
tracking.

z

7.160 m

8

Use Up/Down
navigation keys to
show more re­sults.

i

Heights of buildings or trees without
suitable reflective points can be deter­mined. At the bottom point, distance
and tilt is measured - which needs a re­flective laser target. The upper point
can be targeted with the pointfinder /
crosshair and does not need a reflec­tive laser target as only the inclination is
measured.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

42

Area from Photo

1

-.--- m

2

1x

2

3

Aim perpendicular
to the horizontal
center line of the ar­ea. T hi s area must b e
perfectly flat on the
vertical plane.

OV

*

1x

2x

4x

4

If necessary, use the
Zoom for precise
aiming.

* OV = Overview

2.015m

9.232m

2

5

Select arrows with the
cursor keys or by tapping
on the display and adjust
with softkeys. Corre­sponding area is calculat­ed.

Confirm
measurement.

6

4.581

m

2.015

m

13.192

m

9.232m

2

7

Width
Length

Circumference

8

Exit.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

43

Compass

1

2

Calibrate
Compass?

Refuse Confirm

0.0°N

The arrow always
points to true north.

3

Exit.

4

i

At the following places the compass
probably does not work correctly:

• Inside of buildings

• Close to high voltage lines (e.g. on
train platforms)

• Close to magnets, metal objects or
electrical household appliances

i

If an error message occurs, the
device is tilted too much (>20°
over the front / > 10° side­wise).

Keep the device
away from any
magnet!

i

The compass
has to be cali­brated before
every first
measurement
after switching
on the device.

Rotate the device slowly in a figure 8 motion until OK
icon appears on the display.

i

After 2 sec the
device goes
back to the
compass mode.

Calibration of Compass:

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

44

Pythagoras (3-point)

123

Aim laser at first
target.

4

5

Aim laser at sec­ond target.

6

7

Aim laser at
third target.

20.571 m

23.018 m

21.264 m

24.298 m

8

i

The result is shown in the main line.
Pressing the measuring key for 2 sec in the function
activates automatically Minimum or Maximum meas­urement.

We recommend to use the pythagoras only for indi­rect horizontal measuring.
For height measuring (vertical) it is more precise to
use a function with inclination measurement.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

45

Trapezium

123

Aim laser at upper point.

4

5

Aim laser at 2nd point.

x

x

y

h

y

h

70.80

°

5.790 m

13.459 m

16.440 m

6

20.9

°

78.383 m

2

7

Use Up/Down
navigation keys to
show more re­sults.

Trapezium area

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

46

Stake out

i

Two different
distances (a
and b) can be
entered to
mark off de­fined measured
lengths.

1

2

3

a

b

b

a = b

1

2

3

a

b

b

a = b

1

2

1.012 m

3

Select digit.

1.012 m

4

Adjust digit.

5

Approve
value "a".

0.625 m

6

Adjust
value "b".

7

Approve value "b"
and start meas­urement.

8

Move device
slowly along the
stake-out line.
The distance to
the next stake out
point is displayed.

0.240 m

0.625 m

0.240 m is
missing up to
next 0.625 m
distance.

Next stake
out distance

i

When approaching a stake
out point to less than 0.1 m
the instrument starts to beep.

The function can be stopped
by pressing the CLEAR/OFF
button.

ENFunctions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

47

Distance measurement (ISO 163331-1)

Accuracy with favourable
conditions *

Accuracy with unfavourable
conditions **

Range with favourable
conditions *

Range with unfavourable
condition **

Smallest unit displayed 0.1 mm / 1/32 in

X-Range Power Technology™yes

Ø laser point
at distances

Tilt measurement

Measuring tolerance to laser
beam ****

Measuring tolerance to
housing ****

Range 360°

Smart Base

Working range vertical
sensor

Accuracy vertical sensor up to +/- 0.1°

Working range horizontal
sensor

Accuracy horizontal sensor up to +/- 0.1°

Tolerance P2P function
at distances (combination of
sensors and distance meas­uring)

Device levelling

Levelling range +/- 5°

Levelling accuracy +/- 0.05°

± 1.0 mm / 0.04 in ***

± 2.0 mm / 0.08 in ***

0.05m - 300 m /

0.16 - 1000 ft

0.05m - 150m
(0.16 – 492 ft)

6 /30 / 60 mm
(10 / 50 / 100 m)

-0.1° / +0.2°

± 0.1°

-40° to 80°

360°

approx. :

+/- 2 mm / 2 m
+/- 5 mm / 5 m
+/- 10 mm /10 m

General

Laser class 2

Laser type 635 nm, < 1 mW

Protection class IP54 (dust- and splash

Autom. laser switch off after 90 s

Autom. power switch-off after 180 s

Bluetooth® Smart Bluetooth® v4.0

Range of Bluetooth

WLAN yes

Range of WLAN 10 m

Dimension (H x D x W) 61 x 32 x 164 mm

Weight 291 g /10.2 oz

Temperature range:

-Storage

-Operation

-Charging

Digital data

Resolution for photos 800 x 600 dpi

Resolution for screenshots 240 x 400 dpi

File format JPG, DXF

Download USB

Battery (Li-Ion)

Rated voltage 3.7 V

Capacity 2.6 Ah

Measurements per battery
charge

Charging time Approx. 4 h

Output voltage 5.0 V

Charging current 1 A

®

water protected)

<10 m

2.4 x 1.3 x 6.5 in

-25 to 60 °C

-13 to 140 °F

-10 to 50 °C
14 to 122 °F

-10 to 40 °C
14 to 104 °F

Approx. 4000

ENTechnical Data

* favourable conditions are: white and diffuse reflecting
target (white painted wall), low background illumination and
moderate temperatures.

** unfavourable conditions are: targets with lower or higher
reflectivity or high background illumination or temperatures
at the upper or lower end of the specified temperature
range.

*** Tolerances apply from 0.05 m to 10 m with a confidence
level of 95%. With favourable conditions the tolerance may
deteriorate by 0.05 mm/m for distances between 10 m to
30 m, by 0.10 mm/m between 30 m and 100 m and by 0.20
mm/m for distances above 100 m.

With unfavourable conditions the tolerance may deterio­rate by 0.10 mm/m for distances between 10 m to 30 m, by

0.20 mm/m between 30 m and 100 m and by 0.30 mm/m
for distances above 100 m.

**** after user calibration. Additional angle related deviation
of +/- 0.01° per degree up to +/-45° in each quadrant.

Applies at room temperature. For the whole operating
temperature range the maximum deviation increases by
+/-0.1°.

At a recommended storage tempera-

i

ture of -20°C to +30°C (-4°F to
+86°F), batteries containing a 50% to 100%
charge can be stored up to 1 year. After this
storage period the batteries must be
recharged.

For accurate indirect results, the use of

i

a tripod is recommended. For accurate
tilt measurements a transverse tilt should be
avoided.

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

48

Functions

Distance measuring yes
Min/Max measuring yes
Permanent measuring yes
Stake-out yes
Addition/Subtraction yes
Area yes
Triangle area yes
Volume yes
Trapezium yes
Painter function (area with partial

measurem.)
Pythagoras 2-point, 3-point
Smart Horizontal Mode /

Indirect height
Height-profile measurement yes
Level yes
Sloped objects yes
Height tracking yes
Memory yes
Beep yes
Illuminated colour display yes
Pointfinder (Viewscreen) 4x zoom, OV
Bluetooth® Smart yes
Personalized Favorites yes
Timer yes
Calculator yes
Photo/Screenshot yes
Compass yes
Gallery with USB download yes
Diameter yes
Width yes
Area from Photo yes
Smart Base yes
Pointdata transmission yes
Point to point function /distance yes
Smart Angle yes
Smart Area yes
DXF Data capture yes

yes

yes

If the message Error does not disappear
after switching on the device repeatedly,
contact the dealer.

If the message InFo appears with a number,
press the Clear button and observe the
following instructions:

No. Cause Correction

156 Transverse tilt

greater than 10°

162 Calibration mistake Make sure, the device is

204 Calculation error Perform measurement again.

240 Data transfer error Repeat procedure.

252 Temperature too

high

253 Temperature too

low

255 Received signal too

weak, measuring
time too long

256 Received signal too

high

Hold the instrument without
any transverse tilt.

placed on a absolutely hori­zontal and flat surface.
Repeat the calibration
procedure. If the mistake still
occurs, contact your dealer.

Let device cool down.

Warm device up.

Change target surface (e.g.
white paper).

Change target surface (e.g.
white paper).

ENMessage Codes

No. Cause Correction

258 Measurement outside

of measuring range

260 Laser beam inter-

rupted

300 Smart Base not folded

out

301 Device was moved,

levelling not valid any
more

302 «Point data transmis-

sion» is selected, but
WLAN is off

340 WLAN: Data transfer

error

341 Authentication Error Use correct password.

Correct range.

Repeat measurement.

Fold out Smart Base.

Perform levelling again.
Measuring with invalid
levelling is possible, but it
affects the accuracy.

Switch on WLAN.

Repeat procedure.

Care

• Clean the device with a damp, soft cloth.

• Never immerse the device in water.

• Never use aggressive cleaning agents or

solvents.

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

49

Warranty under PROTECT by Leica Geosystems

Lifetime Manufacturer's Warranty

Warranty coverage for the entire usage time
of the product under PROTECT according
to Leica Geosystems International Limited
Warranty and PROTECT General Terms &
Conditions set out under www.leica-geosys­tems.com/protect. Free of charge repair or
replacement of all products or any parts
under PROTECT that suffer defects as a
result of faults in materials or workmanship.

3 Years No Cost

Additional services should the product under
PROTECT become defective and require
servicing under normal conditions of use, as
described in the user manual, at no additional
charge.

To receive the "3 years No Cost" period, the
product under PROTECT must be regis­tered at http://myworld.leica-geosys­tems.com within 8 weeks of the purchase
date. If the product under PROTECT is not
registered, a "2 years No Cost" period
applies.

Safety Instructions

The person responsible for the instrument
must ensure that all users understand these
directions and adhere to them.

Areas of responsibility

Responsibilities of the manufacturer
of the original equipment:

Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Internet: www.disto.com
The company above is responsible for

supplying the product, including the User
Manual in a completely safe condition.

The company above is not responsible for
third party accessories.

Responsibilities of the person in
charge of the instrument:

• To understand the safety instructions on

the product and the instructions in the
User Manual.

• To be familiar with local safety regulations

relating to accident prevention.

• Always prevent access to the product by

unauthorised personnel.

ENWarranty

Permitted use

• Measuring distances

• Tilt measurement

• Data transfer with Bluetooth

®

/ WLAN

Prohibited use

• Using the product without instruction

• Using outside the stated limits

• Deactivation of safety systems and

removal of explanatory and hazard labels

• Opening of the equipment by using tools

(screwdrivers, etc.)

• Carrying out modification or conversion of

the product

• Use of accessories from other manufac-

turers without express approval

• Deliberate dazzling of third parties; also in

the dark

• Inadequate safeguards at the surveying site

(e.g. when measuring on roads, construc­tion sites, etc.)

• Deliberate or irresponsible behaviour on

scaffolding, when using ladders, when
measuring near machines which are
running or near parts of machines or instal­lations which are unprotected

• Aiming directly in the sun

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

50

ENSafety Instructions

WARNING

Watch out for erroneous measurements if
the instrument is defective or if it has been
dropped or has been misused or modified.
Carry out periodic test measurements.

Particularly after the instrument has been
subject to abnormal use, and before, during
and after important measurements.

CAUTION

Never attempt to repair the product your­self. In case of damage, contact a local dealer.

WARNING

Changes or modifications not expressly
approved could void the user’s authority to
operate the equipment.

Limits of use

Refer to section "Technical data".

i

The device is designed for use in areas
permanently habitable by humans. Do not
use the product in explosion hazardous areas
or in aggressive environments.

Disposal

CAUTION

Flat batteries must not be disposed of with
household waste. Care for the environment
and take them to the collection points
provided in accordance with national or local
regulations.

The product must not be disposed with
household waste.

Dispose of the product appropriately
in accordance with the national regu­lations in force in your country.

Adhere to the national and country specific
regulations.

Product specific treatment and waste
management can be downloaded from our
homepage.

Electromagnetic Compatibility (EMC)

WARNING

The device conforms to the most stringent
requirements of the relevant standards and
regulations.

Yet, the possibility of causing interference in
other devices cannot be totally excluded.

FCC statement (applicable in U.S.)

This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reason­able protection against harmful interference
in a residential installation.This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications.

However, there is no guarantee that interfer­ence will not occur in a particular installation.
If this equipment does cause harmful interfer­ence to radio or television reception, which
can be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

51

This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:

• This device may not cause harmful interfer-

ence, and

• this device must accept any interference

received, including interference that may
cause undesired operation.

This device complies with Industry Canada
license-exempt RSS standard(s). Operation
is subject to the following two conditions:

• This device may not cause interference and

• this device must accept any interference,

including interference that may cause
undesired operation of the device.

ENSafety Instructions

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

52

ENSafety Instructions

Use of the product with Blue-

®

tooth

WARNING

Electromagnetic radiation can cause distur­bances in other equipment, in installations
(e.g. medical ones such as pacemakers or
hearing aids) and in aircraft. It can also affect
humans and animals.

Precautions:

Athough this product conforms to the most
stringent standards and regulations, the
possibility of harm to people and animals
cannot totally excluded.

• Do not use the product near petrol

stations, chemical plants, in areas with a
potentially explosive atmosphere and
where blasting takes place.

• Do not use the product near medical

equipment.

• Do not use the product in airplanes.

• Do not use the product near your body for

extended periods.

Laser classification

The device produces visible laser beams,
which are emitted from the instrument:

It is a Class 2 laser product in accordance
with:

• IEC60825-1 : 2014 „Radiation safety of

laser products“

Laser Class 2 products:

Do not stare into the laser beam or direct it
towards other people unnecessarily. Eye
protection is normally afforded by aversion
responses including the blink reflex.

WARNING

Looking directly into the beam with optical
aids (e.g. binoculars, telescopes) can be
hazardous.

CAUTION

Looking into the laser beam may be
hazardous to the eyes.

Description Value

Wavelength 620 - 690 nm

Maximum radiant output
power for classification

Pulse repetition frequency 320 MHz

Pulse duration > 400 ps

Beam divergence

0.95 mW

0.16 x 0.6 mrad

Labelling

Subject to change (drawings, descriptions
and technical data) without prior notice.

Leica DISTOTM S910 808167a

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

53

Leica Geosystems AG, Heerbrugg, Switzerland has been certified as being
equipped with a quality system which meets the International Standards of
Quality Management and Quality Systems (ISO standard 9001) and Environ­mental Management Systems (ISO standard 14001).

Copyright Leica Geosystems AG, Heerbrugg,
Switzerland 2015
Original text (808167a EN)

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com