Page 1
DE
EN
FR
IT
ES
PT
NL
DA
SV
NO
FI
JA
ZH
KO
PL
HR
HU
RU
CZ
EL
LT
LV
EE
SL
SK
TR
BG
RO
Leica XCR Catch
The Leica XCR Catch is a combined laser receiver and remote control for the Leica Lino ML180.
Keypad
1 ON/OFF key
2 Beeper key
1
2
3
4
3 Sensitivity key
4 Auto alignment key - Press 2 sec
5 Direction key down
6 Direction key up
XCR Cat ch
5
6
Working with receivers
10
Leica Lino ML series 785880c en
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Page 2
DE
EN
FR
IT
ES
PT
NL
DA
SV
NO
FI
JA
ZH
KO
PL
HR
HU
RU
CZ
EL
LT
LV
EE
SL
SK
TR
BG
RO
Display status symbols
1 Sensitivity: fine ±1 mm
2 Sensitivity: medium ±3 mm (default)
1
2
3
4
5
XCR Catc h
6
7
8
9
AT
AK
AL AM
3 Sensitivity: coarse ±5 mm
4 Remote arrows and direction keys
5 Alignment activated
6 Battery: empty
7 Battery status: medium
8 Battery status: full
9 Beep high
AT Beep low
AK Beep off
AL Move receiver down
AM Move receiver up
Leica Lino ML series 785880c en
11
Working with receivers
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Page 3
DE
EN
FR
IT
ES
PT
NL
DA
SV
NO
FI
JA
ZH
KO
PL
HR
HU
RU
CZ
EL
LT
LV
EE
SL
SK
TR
BG
RO
Pairing the Leica XCR Catch with the Leica ML180 Laser
The Leica XCR Catch remote/receiver works exclusively with the Leica Lino ML180 line laser. The
receiver that is included in the package is already
paired with the laser and only communicates with this
specific laser. If you want to pair another Leica XCR
Catch with your laser you will need to redo the pairing
procedure as described below.
When setting up the Leica Lino ML180 for
radio pairing make sure that no other Leica XCR Catch
is in operation in the area to avoid accidental pairing
with this remote.
Pairing procedure:
1Turn laser OFF 1.
2 Press and hold both buttons Horizontal MODE 2
and Vertical MODE 3.
3Turn laser ON 1.
4 Laser is in pairing mode (LED 4 5 6 blinking
slowly in sequence).
5Turn Receiver ON 7.
6 Press button Auto alignment 8 of receiver.
7 Pairing process is complete (LED 4 5 6 blinking
rapidly in sequence for 20 sec).
Lino ML180: XCR Catch:
6
5
Lino
ML180
3
2
ON
LASER
1
4
If the laser is in pairing mode and does not
receive the signal from the remote, it will turn off
after 30 seconds.
The pairing procedure can be repeated
anytime. A Leica Lino ML180 laser and the paired
Leica XCR Catch remote will stay paired until they are
actively paired with another device.
7
8
XCR Catc h
Working with receivers
12
Leica Lino ML series 785880c en
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Page 4
DE
EN
FR
IT
ES
PT
NL
DA
SV
NO
FI
JA
ZH
KO
PL
HR
HU
RU
CZ
EL
LT
LV
EE
SL
SK
TR
BG
RO
Leica XCR Catch alignment features
Manual alignment
XCR Catch
± 4°
± 1.4m @ 20m
± 4.5ft @ 65ft
Lino
ML180
1 Set up the laser unit at the initial position.
2 Switch off the horizontal laserbeam with key 2.
3 Pre-align the laser (V line) within ± 4° of the
desired final alignment position.
4 Remotely align the laser with the direction
keys 1.
2
ON
LASER
XCR Catc h
1 1
Leica Lino ML series 785880c en
13
Working with receivers
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Page 5
DE
EN
FR
IT
ES
PT
NL
DA
SV
NO
FI
JA
ZH
KO
PL
HR
HU
RU
CZ
EL
LT
LV
EE
SL
SK
TR
BG
RO
Automatic alignment (single mode)
In single alignment mode the Leica XCR Catch will
automatically align the Leica Lino ML180 laser once
and will then deactivate the alignment feature.
Auto
XCR Catch
1x ± 4°
± 1.4m @ 20m
± 4.5ft @ 65ft
1
4
2
XCR Catch
3
3
Working with receivers
1 Set up the laser unit at the initial position.
2 Pre-align the laser (V line) within ± 4° of the desired
final alignment position.
3 Select the sensitivity
Adjustment features for beeper and sensitivity are
deactivated during the automatic alignment
process.
Press auto alignment key 2 for 2 sec. until 2 red
4
LEDs blink.
during automatic alignment.
5 Predefine a scan direction by pressing the direction
keys
start looking for the receiver in a predefined
sequence (middle - left - right).
press the alignment key
button.
6 The auto alignment process will move the laser unit
until it is precisely aligned with the Leica XCR Catch
receiver.
7 When the receiver detects the exact position it will
sound a beep for 2 sec. and will display the lighted
green LED
alignment process will be terminated when middle
position has been found.
ment if no laser signal is found or the signal is permanently lost within a time frame of 45 sec. The receiver
will display all 5 LEDs blinking and will sound 3 short
beeps. To reinitiate the receiver press any key.
14
Horizontal laserline will be shut off
3
accordingly within the first 3 sec.
If no direction is predefined the unit will
To deactivate the auto alignment process
4
The receiver will deactivate the auto align-
1
to b e used duri ng ali gnmen t.
2
or press the On/Off
and the middle position. The auto
Leica Lino ML series 785880c en
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Page 6
DE
EN
FR
IT
ES
PT
NL
DA
SV
NO
FI
JA
ZH
KO
PL
HR
HU
RU
CZ
EL
LT
LV
EE
SL
SK
TR
BG
RO
Automatic alignment (continuous mode)
In continuous alignment mode the Leica XCR Catch
will automatically align the Leica Lino ML180 laser and
will then monitor and readjust the alignment continuously.
Auto
XCR Catch
± 4°
± 1.4m @ 20m
± 4.5ft @ 65ft
1
4
2
XCR Catch
3
3
1 Repeat steps 1-3 from section "Automatic align-
ment (single mode)" on page 14.
2 Press auto alignment key 2 and sensitivity key 1
together for 2 sec. Horizontal laserline will be
shut off during automatic alignment.
3 Predefine a scan direction by pressing the direc-
tion keys 3 accordingly within the first 3 sec.
If no direction is predefined the unit will
start looking for the receiver in a predefined
sequence (middle - left - right).
To deactivate the auto alignment process
press the alignment key 2 again for 2 sec.
4 The auto alignment process will move the laser
unit until it is precisely aligned with the Leica XCR
Catch receiver.
5 When the receiver detects the exact position it
will beep for 2 sec. and will display the lighted
green LED 4 and the middle position.
6 The Leica XCR Catch makes the laser follow the
movements of the Leica XCR Catch and will
continuously keep monitoring and readjusting the
alignment after the middle position has been
found. To stop this continuous process press the
alignment key 2 or the On/Off button.
The receiver will automatically deactivate
the auto alignment in case no laser signal is found
or in case the signal is permanently lost after
more than 45 sec. The receiver will display all 5
LEDs blinking and will sound 3 short beeps. To
reinitiate the receiver press any key.
Leica Lino ML series 785880c en
15
Working with receivers
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Page 7
DE
EN
FR
IT
ES
PT
NL
DA
SV
NO
FI
JA
ZH
KO
PL
HR
HU
RU
CZ
EL
LT
LV
EE
SL
SK
TR
BG
RO
Leica RVL100 and XCR Catch
RVL100 XCR Catch
Reception range up to 80 m 265 ft up to 100 m 328 ft
Smart Targeting range* - - up to 50 m 160 ft
Sensitivity (switchable) ±1 mm/±3 mm ±0,04/±0,12 inch
Length of reception
window
Protection IP54 IP65
Operation temperature -10 - +50°C 14°F - +122°F -10 - +50°C 14°F - +122°F
Storage temperature -25 - +70°C -13°F - +158°F -25 - +70°C -13°F - +158°F
Battery type 1x 6LR61, 9V 3x 1,5V AA
Dimensions
Weight with batteries 260 g 9.1 oz 310 g 10.8 oz
* Range for Smart Targeting can be reduced when working outdoors or close to metal structures
42 mm 1,65 inch 86 mm 3,4 inch
147.5 x 75.5 x
29.5 mm
5.8 x 2.9 x 1.2 inch
±1 mm/±3 mm/
±5 mm
190.5 x 75.5 x
29.5 mm
NiMH battery pack (part no. 784966)
Input voltage 3.3 V
Input current 2 A
Charge time 8 h
NiMH charger/adapter (part no. 784967)
Input voltage 100-240 V AC 50-60 Hz
Output voltage 3.3 V
Output current 2 A
Tech n ica l d ata
20
Leica Lino ML series 785880c en
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
±0,04/±0.12/
±0,2 inch
7.5 x 3.0 x 1.2 inch
Loading...