Leica Geosystems 790359 User manual

Leica Rugby 620

User Manual

Version 1.0

English

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

Introduction

Purchase Congratulations on the purchase of a Leica Rotating Laser product.

This manual contains important safety directions as well as instructions for setting up
the product and operating it. Refer to "1 Safety Directions" for further information.

Read carefully through the User Manual before you switch on the product.

Product
identification

Validity of this
manual

Available
documentation

The type and serial number of your product are indicated on the type plate.
Enter the type and serial number in your manual and always refer to this information
when you need to contact your agency or Leica Geosystems authorised service work­shop.

Type: _______________

Serial No.: _______________

This manual applies to the Rugby 620 lasers. Differences between the models are
marked and described.

Name Description/Format

Rugby 620
Quick Guide

Rugby 620
User Manual

Refer to the following resources for all Rugby 620 documentation/software:

Provides an overview of the product. Intended as a quick
reference guide.

All instructions required in order to operate the product
to a basic level are contained in the User Manual.
Provides an overview of the product together with tech­nical data and safety directions.



- 

myWorld@Leica Geosystems ( ) offers a
wide range of services, information and training material.

With direct access to myWorld, you are able to access all relevant services whenever
it is convenient for you, 24 hours a day, 7 days per week. This increases your efficiency
and keeps you and your equipment instantly updated with the latest information from
Leica Geosystems.

Service Description

myProducts Simply add all Leica Geosystems products that you and your

company own. View detailed information on your products, buy
additional options or Customer Care Packages (CCPs), update your
products with the latest software and keep up-to-date with the
latest documentation.

myService View the service history of your products in Leica Geosystems

Service Centers and detailed information on the services performed
on your products. For your products that are currently in Leica
Geosystems Service Centers view the current service status and the
expected end date of service.

mySupport Create new support requests for your products that will be answered

by your local Leica Geosystems Support Team. View the complete
history of your Support and view detailed information on each
request in case you want to refer to previous support requests.

Rugby 620, Introduction

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

2

Service Description

myTraining Enhance your product knowledge with the Leica Geosystems Campus

- Information, Knowledge, Training. Study the latest online training
material or download training material on your products. Keep up­to-date with the latest News on your products and register for Semi­nars or Courses in your country.

Rugby 620, Introduction

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

3

Table of Contents

In this manual Chapter Page

1Safety Directions

1.1 General 6

1.2 Definition of Use 7

1.3 Limits of Use 7

1.4 Responsibilities 7

1.5 Hazards of Use 8

1.6 Laser Classification 10

1.6.1 General 10

1.6.2 Rugby 620 10

1.7 Electromagnetic Compatibility EMC 11

1.8 FCC Statement, Applicable in U.S. 12

2 Description of the System

2.1 System Components 14

2.2 Rugby Laser Components 15

2.3 Case Components 15

2.4 Setup 16

3Operation

3.1 Buttons 17

3.2 LED Indicators 17

3.3 Turning on and off the Rugby 18

3.4 Automatic Mode 18

3.5 Manual Mode 19

3.6 Elevation Alert (H.I.) Function 20

6

14

17

4Receivers

4.1 Rod Eye 140, Classic Receiver 21

4.2 Menu - Rod Eye 140, Classic Receiver 23

4.3 Rod Eye Basic Receiver 23

5Applications

5.1 Setting Forms 25

5.2 Checking Grades 26

5.3 Manual Grades 27

6 Batteries

6.1 Operating Principles 28

6.2 Battery for Rugby 28

7Accuracy Adjustment

7.1 Checking the Level Accuracy 31

7.2 Adjusting the Level Accuracy 32

8Troubleshooting

9 Care and Transport

9.1 Transport 36

9.2 Storage 36

9.3 Cleaning and Drying 37

21

25

28

31

34

36

Rugby 620, Table of Contents

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

4

10 Technical Data

10.1 Conformity to National Regulations 38

10.2 General Technical Data of the Laser 38

38

11 Lifetime Manufacturer’s Warranty

12 Accessories

Index

40

41

42

Rugby 620, Table of Contents

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

5

1Safety Directions

1.1 General

Description The following directions enable the person responsible for the product, and the

person who actually uses the equipment, to anticipate and avoid operational hazards.

The person responsible for the product must ensure that all users understand these
directions and adhere to them.

About Warning
Messages

Warning messages are an essential part of the safety concept of the instrument. They
appear wherever hazards or hazardous situations can occur.

Warning messages...

• make the user alert about direct and indirect hazards concerning the use of the
product.

• contain general rules of behaviour.

For the users‘ safety, all safety instructions and safety messages shall be strictly
observed and followed! Therefore, the manual must always be available to all persons
performing any tasks described herein.

DANGER, WARNING, CAUTION and NOTICE are standardized signal words for iden­tifying levels of hazards and risks related to personal injury and property damage. For
your safety it is important to read and fully understand the table below with the
different signal words and their definitions! Supplementary safety information
symbols may be placed within a warning message as well as supplementary text.

Type Description




DANGER

WARNING

Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

Indicates a potentially hazardous situation or an unintended
use which, if not avoided, could result in death or serious injury.



NOTICE



Rugby 620, Safety Directions

CAUTION

Indicates a potentially hazardous situation or an unintended
use which, if not avoided, may result in minor or moderate
injury.

Indicates a potentially hazardous situation or an unintended
use which, if not avoided, may result in appreciable material,
financial and environmental damage.

Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.

6

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

1.2 Definition of Use

Intended use • The product casts a horizontal laser plane or a laser beam for the purpose of align-

ment.

• The laser beam can be detected by means of a laser detector.

• Remote control of product.

• Data communication with external appliances.

Reasonably
foreseeable misuse

• Use of the product without instruction.

• Use outside of the intended use and limits.

• Disabling safety systems.

• Removal of hazard notices.

• Opening the product using tools, for example screwdriver, unless this is permitted
for certain functions.

• Modification or conversion of the product.

• Use after misappropriation.

• Use of products with recognisable damages or defects.

• Use with accessories from other manufacturers without the prior explicit approval
of Leica Geosystems.

• Inadequate safeguards at the working site.

• Deliberate dazzling of third parties.

• Controlling of machines, moving objects or similar monitoring application without
additional control- and safety installations.

1.3 Limits of Use

Environment Suitable for use in an atmosphere appropriate for permanent human habitation: not

suitable for use in aggressive or explosive environments.



DANGER

Local safety authorities and safety experts must be contacted before working in
hazardous areas, or close to electrical installations or similar situations by the person
in charge of the product.

1.4 Responsibilities

Manufacturer of
the product

Person responsible
for the product

Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica Geosys­tems, is responsible for supplying the product, including the user manual and original
accessories, in a safe condition.

The person responsible for the product has the following duties:

• To understand the safety instructions on the product and the instructions in the
user manual.

• To ensure that it is used in accordance with the instructions.

• To be familiar with local regulations relating to safety and accident prevention.

• To inform Leica Geosystems immediately if the product and the application
becomes unsafe.

• To ensure that the national laws, regulations and conditions for the operation of
e.g. radio transmitters, lasers are respected.

Rugby 620, Safety Directions

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

7

1.5 Hazards of Use





NOTICE



CAUTION

DANGER

WARNING

Watch out for erroneous measurement results if the product has been dropped or has
been misused, modified, stored for long periods or transported.

Precautions:

Periodically carry out test measurements and perform the field adjustments indicated
in the user manual, particularly after the product has been subjected to abnormal use
and before and after important measurements.

Because of the risk of electrocution, it is dangerous to use poles and extensions in the
vicinity of electrical installations such as power cables or electrical railways.

Precautions:

Keep at a safe distance from electrical installations. If it is essential to work in this
environment, first contact the safety authorities responsible for the electrical instal­lations and follow their instructions.

With the remote control of products, it is possible that extraneous targets will be
picked out and measured.

Precautions:

When measuring in remote control mode, always check your results for plausibility.

If the product is used with accessories, for example masts, staffs, poles, you may
increase the risk of being struck by lightning.

Precautions:

Do not use the product in a thunderstorm.







WARNING

CAUTION

CAUTION

Inadequate securing of the working site can lead to dangerous situations, for example
in traffic, on building sites, and at industrial installations.

Precautions:

Always ensure that the working site is adequately secured. Adhere to the regulations
governing safety and accident prevention and road traffic.

If the accessories used with the product are not properly secured and the product is
subjected to mechanical shock, for example blows or falling, the product may be
damaged or people can sustain injury.

Precautions:

When setting-up the product, make sure that the accessories are correctly adapted,
fitted, secured, and locked in position.

Avoid subjecting the product to mechanical stress.

During the transport, shipping or disposal of batteries it is possible for inappropriate
mechanical influences to constitute a fire hazard.

Precautions:

Before shipping the product or disposing of it, discharge the batteries by running the
product until they are flat.

When transporting or shipping batteries, the person in charge of the product must
ensure that the applicable national and international rules and regulations are
observed. Before transportation or shipping contact your local passenger or freight
transport company.

Rugby 620, Safety Directions

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

8



WARNING

During dynamic applications, for example stakeout procedures there is a danger of
accidents occurring if the user does not pay attention to the environmental conditions
around, for example obstacles, excavations or traffic.

Precautions:

The person responsible for the product must make all users fully aware of the existing
dangers.





WARNING

WARNING

If you open the product, either of the following actions may cause you to receive an
electric shock.

• Touching live components

• Using the product after incorrect attempts were made to carry out repairs

Precautions:

Do not open the product. Only Leica Geosystems authorised service workshops are
entitled to repair these products.

If the product is improperly disposed of, the following can happen:

• If polymer parts are burnt, poisonous gases are produced which may impair health.

• If batteries are damaged or are heated strongly, they can explode and cause
poisoning, burning, corrosion or environmental contamination.

• By disposing of the product irresponsibly you may enable unauthorised persons to
use it in contravention of the regulations, exposing themselves and third parties to
the risk of severe injury and rendering the environment liable to contamination.

Precautions:

The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national

regulations in force in your country.
Always prevent access to the product by unauthorised personnel.







WARNING

WARNING

WARNING

Only Leica Geosystems authorised service workshops are entitled to repair these prod­ucts.

High mechanical stress, high ambient temperatures or immersion into fluids can cause
leakage, fire or explosions of the batteries.

Precautions:

Protect the batteries from mechanical influences and high ambient temperatures. Do
not drop or immerse batteries into fluids.

If battery terminals are short circuited e.g. by coming in contact with jewellery, keys,
metalized paper or other metals, the battery can overheat and cause injury or fire, for
example by storing or transporting in pockets.

Precautions:

Make sure that the battery terminals do not come into contact with metallic objects.

Rugby 620, Safety Directions

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

9

1.6 Laser Classification

1.6.1 General

General The following chapters provide instructions and training information about laser safety

according to international standard IEC 60825-1 (2007-03) and technical report IEC TR
60825-14 (2004-02). The information enables the person responsible for the product
and the person who actually uses the equipment, to anticipate and avoid operational
hazards.





1.6.2 Rugby 620

General The rotating laser built into the product produces a visible laser beam which emerges

from the rotating head.

According to IEC TR 60825-14 (2004-02), products classified as laser class 1,
class 2 and class 3R do not require:

• laser safety officer involvement,

• protective clothes and eyewear,

• special warning signs in the laser working area

if used and operated as defined in this User Manual due to the low eye hazard
level.
National laws and local regulations could impose more stringent instructions
for the safe use of lasers than IEC 60825-1 (2007-03) and IEC TR 60825-14
(2004-02).



CAUTION

The laser product described in this section is classified as laser class 2 in accordance
with:

• IEC 60825-1 (2007-03): "Safety of laser products"

• EN 60825-1 (2007-10): "Safety of laser products"

These products are safe for momentary exposures but can be hazardous for deliberate
staring into the beam. The beam may cause dazzle, flash-blindness and after-images,
particularly under low ambient light conditions.

Rugby 620:

Description Value

Maximum peak radiant power 2.7 mW ± 5%

Pulse duration (effective) 1.1 ms

Pulse repetition frequency 10 rps

Beam divergence < 1.5 mrad

Wavelength 635 nm ± 10 nm

From a safety perspective, class 2 laser products are not inherently safe for the eyes.

Precautions:

1) Avoid staring into the beam.

2) Avoid pointing the beam at other people.

Rugby 620, Safety Directions

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

10

Labelling

a

005758_001

a) Laser beam

Laser Radiation

Do not stare into the beam

Class 2 Laser Product

according to IEC 60825-1

(2007 - 03)

Po  2.70 mW

 = 635 ± 10 nm

1.7 Electromagnetic Compatibility EMC

Description The term Electromagnetic Compatibility is taken to mean the capability of the product

to function smoothly in an environment where electromagnetic radiation and electro­static discharges are present, and without causing electromagnetic disturbances to
other equipment.







WARNING

CAUTION

CAUTION

Electromagnetic radiation can cause disturbances in other equipment.

Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that other
equipment may be disturbed.

There is a risk that disturbances may be caused in other equipment if the product is
used with accessories from other manufacturers, for example field computers,
personal computers or other electronic equipment, non-standard cables or external
batteries.

Precautions:

Use only the equipment and accessories recommended by Leica Geosystems. When
combined with the product, they meet the strict requirements stipulated by the guide­lines and standards. When using computers or other electronic equipment, pay atten­tion to the information about electromagnetic compatibility provided by the manufac­turer.

Disturbances caused by electromagnetic radiation can result in erroneous measure­ments.

Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that the
product may be disturbed by intense electromagnetic radiation, for example, near
radio transmitters, two-way radios or diesel generators.

Precautions:

Check the plausibility of results obtained under these conditions.

CAUTION



Rugby 620, Safety Directions

Find Quality Products Online at: [e-mail]

If the product is operated with connecting cables attached at only one of their two
ends, for example external supply cables, interface cables, the permitted level of elec­tromagnetic radiation may be exceeded and the correct functioning of other products
may be impaired.

Precautions:

While the product is in use, connecting cables, for example product to external battery,
product to computer, must be connected at both ends.

11

www.GlobalTestSupply.com

Radios or digital
cellular phones

WARNING



Use of product with radio or digital cellular phone devices:

Electromagnetic fields can cause disturbances in other equipment, in installations, in
medical devices, for example pacemakers or hearing aids and in aircraft. It can also
affect humans and animals.

Precautions:

Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that other
equipment can be disturbed or that humans or animals can be affected.

• Do not operate the product with radio or digital cellular phone devices in the vicinity
of filling stations or chemical installations, or in other areas where an explosion
hazard exists.

• Do not operate the product with radio or digital cellular phone devices near to
medical equipment.

• Do not operate the product with radio or digital cellular phone devices in aircraft.

1.8 FCC Statement, Applicable in U.S.







WARNING

WARNING

The greyed paragraph below is only applicable for products without radio.

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interfer­ence in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Leica Geosystems for compliance
could void the user's authority to operate the equipment.

Rugby 620, Safety Directions

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

12

Labelling Rugby 620

005781_001

Leica Geosystems AG

CH-9435 Heerbrugg

Complies w ith FDA per formanc e standard s for

laser products except for deviations pursuant to

Laser No tice Nr. 50 July 24, 2 007

This devic e complies wit h part 15 of the F CC

Rules. Ope ration is subje ct to the follo wing

two con ditions: (1) This de vice may not
cause har mful inter ference, a nd (2) This

device must accept any interference
received, including interference that

may cause u ndesired op eration.

Type: Rugby 620

Power : 8.4V / 0.5A

Art.No.: 799042

Made in China

Serial Number:10636202500

Labelling Rod Eye

Labelling Rod Eye

Rod Eye 140:

005146_001

Rod Eye Basic:

005664_001

Type: RE140

Power : 3V / 60mA
Art.No.: 785493
Made in China

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.

REBASType:

Art.No.: 769811
Power: 9.0V / 0.2A
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured:

20XX. XX

S.No.: 1234567

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Made in China

Swiss Technology

by Leica Geosystems

CH-9435 Heerbrugg

Rugby 620, Safety Directions

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

13

2 Description of the System

2.1 System Components

General description The Rugby 620 is a laser tool for general construction and levelling applications such as

•Setting forms

• Checking grades

• Controlling depths for excavations
If set up within the self-levelling range, the Rugby automatically levels to create an

accurate horizontal plane of laser light.
Once the Rugby has levelled, the head will start rotating and the Rugby is ready for
use.
30 seconds after the Rugby has completed the levelling, the H.I. Alert system becomes
active and protects the Rugby against changes in elevation caused by movement of
the tripod to ensure accurate work.

Available system
components



Rod Eye 140 Rod Eye Basicor

Rugby 620

Li-Ion/Alkaline

005782_001

The delivered components depend on the package ordered.

Rugby 620, Description of the System

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

14

2.2 Rugby Laser Components

Rugby laser
components

005783_001

2.3 Case Components

Case components

a

b
c

a) Carry Handle

d

b) LED Indicators

e

c) Buttons
d) Battery compartment
e) Charge jack (for Li-Ion battery pack)

a

b

d

e

c

f

g

h

005784_001

a) Rugby laser
b) Rod eye receiver mounted on the bracket
c) Li-Ion battery pack or Alkaline battery pack
d) 2x AA-cell battery
e) User Manual/CD
f) Second receiver (can be purchased separately)
g) 4 x D-cell battery (for alkaline versions only)
h) Charger (for Li-Ion versions only)

Rugby 620, Description of the System

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

15

2.4 Setup

Location • Keep the location clear of possible obstructions that could block or reflect the laser

beam.

• Place the Rugby on a stable ground. Ground vibration and extremely windy condi­tions can affect the operation of the Rugby.

• When working in a very dusty environment place the Rugby up-wind so the dirt is
blown away from the laser.

Setting up on a
Tripod

005785_001

Step Description

1. Set up the tripod.

2. Place the Rugby on the tripod.

3. Tighten the screw on the underside of the tripod to secure the Rugby on the
tripod.

• Attach the Rugby securely to a tripod or laser trailer, or mount on a stable level
surface.

• Always check the tripod or laser trailer before attaching the Rugby. Make sure all
screws, bolts and nuts are tight.

• If a tripod has chains, they should be slightly loose to allow for thermal expansion
during the day.

• Secure the tripod on extremely windy days.

Rugby 620, Description of the System

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

16

3Operation

3.1 Buttons

Buttons

a

005786_001

b

c

a) Up and Down Arrow buttons
b) Power button
c) Automatic/Manual Mode button

Description of the
Buttons

Button Function

Up and Down
Arrow

Power Press to turn on or off the Rugby.

Automatic/
Manual Mode

3.2 LED Indicators

Main Functions Description

The LED Indicators have three main functions:

• To indicate the level status of the axes.

• To indicate the battery status.

• To indicate an H.I. Alert condition.

Diagram of the LED Indicators

Press to enter a slope for an axis in Manual Mode.

Press once to change the X-axis to Manual Mode with Y-axis self­levelling.

Press again to change the Y-axis to Manual Mode with X-axis
self-levelling.

Press again to change both axes to Manual Mode with no self­levelling.

Press again to change back to Full Automatic Mode.



Note the changes in the LED indicators in the Manual
Modes. The red LED indicates that the corresponding axis
is in Manual Mode.

a
b

005787_001

Rugby 620, Operation

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

c

a) Low Battery Indicator LED
b) X-axis Indicator LED
c) Y-axis Indicator LED

17

Description of the
LEDs

IF the is/are THEN

Low Battery Indicator
LED (Li-Ion)

Low Battery Indicator
LED (alkaline)

X-axis and Y-axis Indi­cator LEDs

off the battery is okay.

flashing slowly the battery has ≤ 10% (4 h) power

remaining.

flashing quickly the battery has ≤ 5% (2 h) power remaining.

red the battery cannot power the Rugby. Charge

the battery.

off the battery is okay.

flashing slowly the battery is getting low.

flashing rapidly the battery needs to be changed.

green the axis is level.

flashing green the axis is levelling.

red the axis is in Manual Mode.

both flashing
red

an H.I. Alert is indicated.

3.3 Turning on and off the Rugby

Turning on and off Press the Power button to turn on or off the Rugby.

After turning on:

• If set up within the 5° self-levelling range, the Rugby automatically levels to create
an accurate horizontal plane of laser light.

• Once levelled, the head starts rotating and Rugby is ready for use.

• After 30 seconds of completing the levelling, the H.I. Alert system becomes active
to protect the laser against changes in elevation caused by movement or settling
of the tripod.

• The self-levelling system and H.I. Alert function continues to monitor the position
of the laser beam to ensure consistent and accurate work.

3.4 Automatic Mode

Description of the
Automatic Mode

The Rugby always starts up in Automatic Mode.
In Automatic Mode the Rugby automatically levels if set up within the 5° self-levelling
range.

Rugby 620, Operation

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

18

3.5 Manual Mode

Description of the
Manual Mode

Changing the X-axis
to Manual Mode

After start-up the Manual Mode can be activated. In Manual Mode the self-levelling will
be deactivated. The following options are available:

• Change the X-axis to Manual Mode

• Change the Y-axis to Manual Mode

• Change to Full Manual Mode



After startup, press the Automatic/Manual Mode Button once to change the X-axis to
Manual Mode.



• The X-axis does not self-level and a slope can be entered in this axis using the Up

• The X-axis LED is red.

• The Y-axis continues to self-level and the Y-axis

When the X-axis is in Manual Mode, the X-axis can be sloped upwards or downwards
as illustrated.

After turning the Rugby off and on again, the Rugby is in Automatic Mode.

The X-axis and Y-axis are marked on the top of the Rugby.

and Down Arrow buttons on the Rugby.

LED flashes green until level.

Changing the Y-axis
to Manual Mode

005788_001

Press the Automatic/Manual Mode button again to change the Y-axis to Manual Mode.



• The Y-axis does not self-level and a slope can be entered in this axis using the Up

• The Y-axis LED is red.

• The X-axis continues to self-level and the X-axis

When the Y-axis is in Manual Mode, the Y-axis can be sloped upwards or downwards
as illustrated.

005789_001

The X-axis and Y-axis are marked on the top of the Rugby.

and Down Arrow buttons on the Rugby.

LED flashes green until level.

Rugby 620, Operation

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

19

Changing to Full
Manual Mode

Press the Automatic/Manual Mode button again to change to Full Manual Mode.



• Both the X-axis and Y-axis do not self-level and a slope can be entered in the X-axis

• The X-axis LED is red.

• The Y-axis LED is red.

When both the X-axis and Y-axis are in Manual Mode, the X-axis can be sloped using
the Up and Down Arrow buttons.

005790_001

The X and Y axes are marked on the top of the Rugby.

using the Up and Down Arrow buttons on the Rugby.

3.6 Elevation Alert (H.I.) Function

Description of the
Elevation Alert
function

Disable or enable
the Elevation Alert
function

• The Elevation Alert or Height of Instrument (H.I.) function prevents incorrect work
caused by movement or settling of the tripod that would cause the laser to level at
a lower height.

• The Elevation Alert function becomes active and monitors the movement of the
laser 30 second after the Rugby has completely levelled and the head of the laser
starts rotating.

• The Elevation Alert monitors the laser. If disturbed, both the X-axis LED and Y-axis
LED flash and the Rugby beeps rapidly.

• To stop the alert turn Rugby off and on again. Check the height of the laser before
beginning to work again.



The Elevation Alert function can be disabled or enabled by pressing the following
button combination:

• With the Rugby turned on, press and hold the Up and Down Arrow buttons.

• Press the Automatic/Manual Mode button.



The Elevation Alert function turns on automatically every time the Rugby is
turned on.

The Rugby beeps once to indicate the change.

Rugby 620, Operation

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

20

4 Receivers

Description The Rugby 620 is sold with the Rod Eye 140 Classic or Rod Eye Basic Receiver.

4.1 Rod Eye 140, Classic Receiver

Instrument
components
part 1 of 2

a
b

c

d

005147_001

Component Description

Level vial Aids to keep the rod plumb when taking readings.

Audio Speaker Indicates the detector’s position:

• High - Fast beeping

• On-grade - Solid tone

• Low - Slow beeping

LCD window Front and rear LCD arrow indicate the detector’s position.

LEDs Display the relative position of the laser beam. Three channel

indication:

•High - Red

• On-grade - Green

•Low - Blue

Laser Reception
window

On-grade Indicates the on-grade position of the laser.

Keypad Power, accuracy and volume functions. Refer to "Description of

Detects the laser beam. The reception windows must be directed
towards the laser.

the Buttons" for detailed information.

e
f

a) Level vial
b) Audio Speaker

g

c) LCD window
d) LEDs
e) Laser Reception window
f) On-grade
g) Keypad

Rugby 620, Receivers

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

21

Instrument

005149_001

a

b

c

components
part 2 of 2

Description of the
Buttons

c

a

d

b

005148_001

Component Description

Bracket
Mounting Hole

Offset notch Use to transfer reference marks. The notch is 85 mm (3.35")

Product label The serial number is located inside the battery compartment.

Battery door Access to the battery compartment.

Location to attach the receiver bracket for normal operation.

below to top of the detector.

a) Bracket Mounting Hole
b) Offset notch
c) Product label
d) Battery door

a) Power
b) Audio
c) Bandwidth

Button Function

Power Press once to turn on the Receiver.

Audio Press to change the audio output.

Bandwidth Press to change detection bandwidth.

Rugby 620, Receivers

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

22

4.2 Menu - Rod Eye 140, Classic Receiver

Menu access and
navigation

Menu

To access the menu of the Rod Eye 140 Classic Receiver, press the Bandwidth button
and Audio button simultaneously.

• Use the Bandwidth button and Audio button to change parameters.

• Use the Power button to scroll through the menu.



Menu Function Indication

LED Changes the brightness of

Red and Green LEDs
change brightness to
indicate this parameter.

BAT Turns on or off the Laser

The laser icon flashes
to indicate this param­eter.

MEM Turns on or off the position

The down arrow bars
are filling to indicate
this parameter.

MENU MODE - The blue LED will blink slowly indicating menu mode.

Red and green LEDs -

the LED indicators.

low battery indication on
the receiver.

memory function.

High/Low/Off

Green LED is on: Laser low
battery icon function is active.

Red LED is on: Laser low
battery icon function is not
active.

Green LED is on: function is on.

Red LED is on: function is off.

4.3 Rod Eye Basic Receiver

Instrument
components
part 1 of 2

a

b

005665_001

Component Description

Level vial Aids to keep the rod plumb when taking readings.

Keypad Power, accuracy and volume functions. Refer to "Description of

the buttons" for detailed information.

On-grade Indicates the on-grade position of the laser.

Laser Reception
window

LCD window Front and rear LCD arrow indicate the detector’s position.

Audio Speaker Indicates the detector’s position:

Detects the laser beam. The reception windows must be directed
towards the laser.

• High - Fast beeping

• On-grade - Solid tone

• Low - Slow beeping

c

d
e

a) Level vial

f

b) Keypad
c) On-grade
d) Laser Reception window
e) LCD window
f) Audio Speaker

Rugby 620, Receivers

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

23

Instrument

005667_001

a
b

c

components
part 2 of 2

Description of the
buttons

a

c

d

b

e

a) Bracket Mounting Hole
b) Offset notch
c) Battery door
d) Serial number label

005666_001

e) Product label

Component Description

Bracket

Location to attach the receiver bracket for normal operation.

Mounting Hole

Offset notch Use to transfer reference marks. The notch is 45 mm (1.75")

below to top of the detector.

Battery door Access to the battery compartment.

a) Audio
b) Bandwidth
c) Power

Button Function

Audio Press to change the audio output.

Bandwidth Press to change detection bandwidth.

Power Press once to turn on the Receiver.

Rugby 620, Receivers

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

24

5 Applications

ba

5.1 Setting Forms

Setting Forms
step-by-step

Application shown using the Rod Eye 140, Classic Receiver.

4

7

6

005791_001

Step Description

1. Set up the Rugby on a tripod.

2. Set up the tripod on a stable surface outside the working area.

3. Attach the receiver to a rod.

4. Turn on the Rugby and the receiver.

5. Set the base of the rod on a known point for the finished height of forms.

6. Adjust the height of the receiver on the rod until the on-grade (centre-line)
position is indicated on the receiver by:

•the centre bar

• the green flashing LED

• a solid audio tone

7. Set the rod with the attached receiver on top of the form.

8. Adjust the height of the form until the on-grade position is again indicated.

9. Continue to additional positions until the forms are levelled to the rotating
plane of the Rugby.

3

5

1 + 2

8

9

Rugby 620, Applications

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

25

5.2 Checking Grades

ba

Checking Grades
step-by-step

Application shown using the Rod Eye 140, Classic Receiver.

6

3

7b

7a

4

7c

5

005792_001

Step Description

1. Set up the Rugby on a tripod.

2. Set up the tripod on a stable surface outside the working area.

3. Attach the receiver to a rod.

4. Turn on the Rugby and the receiver.

5. Set the base of the rod on a known point for the finished grade.

6. Adjust the height of the receiver on the rod until the on-grade (centre-line)
position is indicated on the receiver by:

•the centre bar

• the green flashing LED

• a solid audio tone

7. Set the rod with the attached receiver on top of the excavation or concrete
pour to check for correct elevation.

8. Variances can be read from the digital receiver.

• 7a: Position is too high.

• 7b: Position is too low.

• 7c: Position is on grade.

1 + 2

Rugby 620, Applications

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

26

5.3 Manual Grades

1x

ba

Manual Grading
step-by-step

Application shown using the Rod Eye 140, Classic Receiver.

4

7 8

6

α

X

3

α

5

005793_001

Step Description

1. Set up the Rugby on a tripod.

2. Set up the tripod at the base of a slope with the x-axis pointing in the direction
of the slope.

3. Attach the receiver to a rod.

4. Turn on the Rugby and the receiver.

5. At the base of the slope, adjust the height of the receiver on the rod until the
on-grade (centre-line) position is indicated on the receiver by:

•the centre bar

• the green flashing LED

• a solid audio tone

6. Move the rod and the attached receiver to the top of the slope.

7. Change the X-axis to Manual Mode by pressing the Automatic/Manual Mode
button once on the Rugby.

8. Use the Up and Down Arrow buttons on the Rugby to move the laser beam up
and down until the on-grade (centre-line) position is indicated on the receiver
by:

•the centre bar

• the green flashing LED

• a solid audio tone

1 + 2

Rugby 620, Applications

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

27

6Batteries

Description The Rugby 620 can be purchased with alkaline batteries or a rechargeable Li-Ion

battery pack.
The following information is appropriate only to the model you have purchased.

6.1 Operating Principles

Charging / first-time
use

Operation /
Discharging

• The battery must be charged prior to using it for the first time because it is deliv­ered with an energy content as low as possible.

• The permissible temperature range for charging is between 0°C to +40°C/ +32°F to
+104°F. For optimal charging, we recommend charging the batteries at a low
ambient temperature of +10°C to +20°C/+50°F to +68°F if possible.

• It is normal for the battery to become warm during charging. Using the chargers
recommended by Leica Geosystems, it is not possible to charge the battery if the
temperature is too high.

• For new batteries or batteries that have been stored for a long time (> three
months), it is effectual to make only one charge/discharge cycle.

• For Li-Ion batteries, a single discharging and charging cycle is sufficient. We recom­mend carrying out the process when the battery capacity indicated on the charger
or on a Leica Geosystems product deviates significantly from the actual battery
capacity available.

• The batteries can be operated from -20°C to +55°C/-4°F to +131°F.

• Low operating temperatures reduce the capacity that can be drawn; high operating
temperatures reduce the service life of the battery.

6.2 Battery for Rugby

Charging the Li-Ion
battery pack
step-by-step

The rechargeable Li-Ion battery pack on the Rugby can be charged without removing
the battery pack from the laser.

4

2

6

1

005794_001

Step Description

1. Slide the locking mechanism on the battery compartment to the very left to
expose the charge jack.

2. Plug the AC connector into the appropriate AC power source.

Rugby 620, Batteries

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

3

5

28

Step Description

3. Connect the charger plug into the charge jack on the Rugby battery pack.

4. The small LED next to the charge jack flashes indicating that the Rugby is
charging. The LED is on solid when the battery pack is fully charged.

5. When the battery pack is fully charged, disconnect the charger plug from the
charge jack.

6. Slide the locking mechanism to the centre position to prevent dirt from
getting into the charging jack.

Changing the Li-Ion
batteries
step-by-step



The Low Battery Indicator LED on the Rugby flashes when the batteries are low and
need to be charged.
The charge indicator LED on the Lithium-Ion battery pack indicates when the pack is
being charged (flashing slowly) or fully charged (on, not flashing).

005795_001

Step Description




1. Slide the locking mechanism on the battery compartment to the right and

2. To remove the batteries:

3. Close the cover of the battery compartment and slide the locking mecha-

The battery pack reaches a full charge in approximately 5 hours if completely
empty. A one hour charge should allow the Rugby to run for a full eight hours.

2

1

3

The batteries are inserted in the front of the laser.

The rechargeable battery pack can be recharged without being removed
from the laser. Refer to " Charging the Li-Ion battery pack step-by-step" for
further information.

open the cover of the battery compartment.

Remove the batteries from the battery compartment.

To insert the batteries:
Insert the batteries into the battery compartment.

nism to the left centre position until it locks into position.

Rugby 620, Batteries

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

29

Changing the alka­line batteries
step-by-step

The Low Battery Indicator LED on the Rugby flashes when the batteries are low and
need to replaced.

+

—

2

005796_001

Step Description



1. Slide the locking mechanism on the battery compartment to the right and

2. To remove the batteries:

3. Close the cover of the battery compartment and slide the locking mecha-

The batteries are inserted in the front of the laser.

open the cover of the battery compartment.

Remove the batteries from the battery compartment.

To insert the batteries:
Insert the batteries into the battery compartment, ensuring that the
contacts are facing in the right direction.



nism to the left until it locks into position.

The correct polarity is displayed on the battery holder.

—

+

+

—

—

+

3

1

3

Rugby 620, Batteries

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

30

7 Accuracy Adjustment

About • It is the responsibility of the user to follow operating instructions and to periodi-

cally check the accuracy of the laser and work as it progresses.

• The Rugby is adjusted to the defined accuracy specification at the factory. It is
recommended to check the laser for accuracy upon receipt and periodically there­after to ensure accuracy is maintained. If the laser requires adjustment, contact
your nearest authorised service centre or adjust the laser using the procedures
described in this chapter.

• Only enter the accuracy adjustment mode when you plan to change the accuracy.
Accuracy adjustments should only be performed by a qualified individual that
understands basic adjustment principles.

• It is recommended to perform this procedure with two people on a relatively flat
surface.

7.1 Checking the Level Accuracy

Checking the level
accuracy
step-by-step

Step Description

1. Place the Rugby on a flat, level surface or tripod approximately 30 m (100 ft)
from a wall.

30 m (100 ft)

X+

30 m (100 ft)

X—

005772_001

2. Align the first axis so that it is square to a wall. Allow the Rugby to self-level
completely (approximately 1 minute after the Rugby begins to rotate).

3. Mark the position of the beam.

4. Rotate the laser 180° and allow it to self-level.

5. Mark the opposite side of the first axis.

30 m (100 ft)

Y+

30 m (100 ft)

Y—

005773_001

6. Align the second axis of the Rugby by rotating it 90° so that this axis is
square to the wall. Allow the Rugby to self-level completely.

Rugby 620, Accuracy Adjustment

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

31

Step Description

7. Mark the position of the beam.

8. Rotate the laser 180° and allow it to self-level.

9. Mark the opposite side of the second axis.



The Rugby is within its accuracy specification if the four marks are within
± 1.5 mm (± 1/16") from the centre.

7.2 Adjusting the Level Accuracy

Description

Entering adjust­ment mode
step-by-step

In Adjustment Mode the X-axis LED indicates changes to the X-axis.

X

005774_001

The Y-axis LED indicates changes to the Y-axis

Y

005775_001

Step Description

1. Turn off the power.

2. Press and hold both the Up and Down Arrow buttons.

3. Press the Power button. The active axis is the X-axis.

The following sequence of LED behaviour occurs:

• The X-axis and the Y-axis LEDs flash alternately three times.

• The X-axis LED flashes three times, then flashes slowly until level. When the Rugby
is level, the X-axis LED is on, but does not flash.

• The Y-axis LED is off.

Rugby 620, Accuracy Adjustment

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

32

Adjusting the X-axis
step-by-step

Step Description

1. Press the Up and Down Arrow buttons to increment the laser beam up and
down. Each increment is indicated by a flash of the X-axis LED and a beep
from the audio indicator.

2. Continue to press the Up and Down Arrow buttons and monitor the spot
until the Rugby is within its specified range.



3. Press the Automatic/Manual Mode button to switch to the Y-axis.

The following sequence of LED behaviour occurs:

• The X-axis and the Y-axis LEDs flash alternately three times.

• The Y-axis LED flashes three times, then flashes slowly until level. When the Rugby
is level, the Y-axis LED is on, but does not flash.

• The X-axis LED is off.

Five steps are equal to 10 arc seconds of change, or approximately

1.5 mm at 30 m (1/16" at 100’).

Adjusting the Y-axis
step-by-step

Exiting adjustment
mode step-by-step



Step Description

1. Press the Up and Down Arrow buttons to increment the laser beam up and
down. Each increment is indicated by a flash of the Y-axis LED and a beep
from the audio indicator.

2. Continue to press the Up and Down Arrow buttons and monitor the spot
until the Rugby is within its specified range.



3. Press the Automatic/Manual Mode button to switch back to the X-axis if
desired.

Press and hold the Automatic/Manual Mode button for 3 seconds to save and exit
Adjustment Mode.
The X-axis LED and Y-axis LED flash alternately three times, then the Rugby shuts off.

Pressing the Power button at any time while in Adjustment Mode will exit the mode
without saving changes.

Five steps are equal to 10 arc seconds of change, or approximately

1.5 mm at 30 m (1/16" at 100’).

Rugby 620, Accuracy Adjustment

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

33

8Troubleshooting

5 Hz

+

Alerts

Alert Symptom Possible causes and solu-

tions

Low Battery LED flashes red, or
is on but not flashing.

Elevation (H.I.) Alert
The LEDs flash quickly with an
audio beep.

Servo Limit Alert
All LEDs flash sequentially.

Temperature Alert
All LEDs are on but not flashing.

The batteries are low. Replace
the alkaline batteries or
recharge the Li-Ion battery
pack. Refer to "6 Batteries".

The Rugby has been bumped
or tripod was moved. Turn off
Rugby to stop alert check the
height of the laser before
beginning to work again. Allow
Rugby to re-level and check
the height of the laser.
After two minutes in the alert
condition, the unit will s h ut off
automatically.

The Rugby is tipped too far to
reach a level position. Re-level
the Rugby within the 5 degree
self-levelling range.
This alert will also be displayed
any time the unit is tipped
more than 45° from level.
After two minutes in the alert
condition, the unit will s h ut off
automatically.

The Rugby is in an environment
where it cannot operate
without causing damage to the
laser diode. This could be a
result of heat from direct
sunlight. Shade the Rugby
from the sun.
After two minutes in the alert
condition, the unit will s h ut off
automatically.

Troubleshooting

Rugby 620, Troubleshooting

Find Quality Products Online at: [e-mail]

Problem Possible Cause(s) Suggested Solutions

The Rugby is
working, but not
self-levelling.

The Rugby is in Manual Mode. The Rugby must be in Auto-

matic Mode to self-level. Set
the Rugby to Automatic Mode
by pressing the Auto­matic/Manual Mode button.

– In Automatic Mode the X-

axis LED and the Y-axis LED
flash green while levelling.

– In Manual Mode the X-axis

LED and/or the Y-axis LED
are red.

www.GlobalTestSupply.com

34

Problem Possible Cause(s) Suggested Solutions

Rugby does not
turn on.

The distance of the
laser is reduced.

The laser receiver
is not working
properly.

Elevation Alert
function is not
working.

The Rugby does
not switch to
Manual Mode.
The Rugby beeps
three times when
the Auto­matic/Manual
Mode button is
pressed and does
not change to
Manual Mode.

The batteries are low or dead. Check the batteries and

change or charge the batteries
if necessary. If the problem
continues, return the Rugby to
an authorised service centre
for service.

Dirt is reducing the laser output. Clean the windows of the

Rugby and the receiver. If the
problem continues, return the
Rugby to an authorised service
centre for service.

The Rugby is not rotating. It may
be levelling or in Elevation Alert.

The receiver is out of usable
range.

The batteries of the receiver are
low.

The Elevation Alert function is
disabled.

The Manual Mode is disabled. The Manual Mode can be

Check for proper operation of
the Rugby.



Move closer to the Rugby.

Change the receiver batteries.

The Elevation Alert function is
enabled or disabled by
pressing the following button
combination:
With Rugby turned on and
rotating, press and hold the Up
and Down Arrow buttons. Then
press the Automatic/Manual
Mode button to enable or
disable the Elevation Alert
function. The Rugby beeps
once to indicate the change.

enabled or disabled by
pressing the following button
combination:
With the Rugby turned off,
press and hold both the Auto­matic/Manual Mode button
and the Power button for
5 seconds. The Rugby will beep
five times, then give a longer
beep at the end to indicate the
change.

Refer to the receiver
manual for more infor­mation.

Rugby 620, Troubleshooting

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

35

9 Care and Transport

9.1 Transport

Transport in the
field

Transport in a road
vehicle

Shipping When transporting the product by rail, air or sea, always use the complete original

Shipping, transport
of batteries

Field adjustment Periodically carry out test measurements and perform the field adjustments indicated

When transporting the equipment in the field, always make sure that you

• either carry the product in its original transport container,

• or carry the tripod with its legs splayed across your shoulder, keeping the attached
product upright.

Never carry the product loose in a road vehicle, as it can be affected by shock and
vibration. Always carry the product in its transport container and secure it.

Leica Geosystems packaging, transport container and cardboard box, or its equivalent,
to protect against shock and vibration.

When transporting or shipping batteries, the person in charge of the product must
ensure that the applicable national and international rules and regulations are
observed. Before transportation or shipping, contact your local passenger or freight
transport company.

in the User Manual, particularly after the product has been dropped, stored for long
periods or transported.

9.2 Storage

Product Respect the temperature limits when storing the equipment, particularly in summer if

the equipment is inside a vehicle. Refer to "Technical Data" for information about
temperature limits.

Field adjustment After long periods of storage inspect the field adjustment parameters given in this

user manual before using the product.

Li-Ion and alkaline
batteries

For Li-Ion and alkaline batteries

• Refer to "Technical Data" for information about storage temperature range.

• Remove batteries from the product and the charger before storing.

• After storage recharge batteries before using.

• Protect batteries from damp and wetness. Wet or damp batteries must be dried
before storing or use.

For Li-Ion batteries

• A storage temperature range of -20°C to +30°C/-4°F to 86°F in a dry environment
is recommended to minimise self-discharging of the battery.

• At the recommended storage temperature range, batteries containing a 50% to
100% charge can be stored for up to one year. After this storage period the
batteries must be recharged.

Rugby 620, Care and Transport

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

36

9.3 Cleaning and Drying

Product and
accessories

Damp products Dry the product, the transport container, the foam inserts and the accessories at a

Cables and plugs Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting

• Blow dust off lenses and prisms.

• Never touch the glass with your fingers.

• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or pure alcohol. Do not use other liquids; these can attack the polymer
components.

temperature not greater than 40°C /104°F and clean them. Remove the battery cover
and dry the battery compartment. Do not repack until everything is completely dry.
Always close the transport container when using in the field.

cables.

Rugby 620, Care and Transport

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

37

10 Technical Data

10.1 Conformity to National Regulations

Conformity to
national regulations

For products which do not fall under R&TTE directive:

Hereby, Leica Geosystems AG, declares that the product/s is/are in
compliance with the essential requirements and other relevant provi­sions of the applicable European Directives. The declaration of
conformity can be consulted at

10.2 General Technical Data of the Laser

Operating range Operating range (diameter):

Rugby 620: 800 m/2600 ft

Self-levelling
accuracy

Self-levelling range

Rotation speed

Laser Dimensions

Self-levelling accuracy: ±1.5 mm at 30 m (±1/16" at 100 ft)

Self-levelling accuracy is defined at 25°C (77°F)

Self-levelling range: ±5°

Rotation speed: 10 rps

239 mm (9.4") 192 mm (7.6")

Weight

Internal battery

212 mm (8.4")

005797_001

Rugby 620 weight with battery: 2.56 kg/5.6 lbs.

Type Operating times* at 20°C

A600 Lithium-Ion (Li-Ion Pack) 40 h

Alkaline (four D-cells) 60 h

*Operating times are dependent upon environmental conditions.




Charging the Li-Ion battery pack takes a maximum of five hours.
Use only high quality alkaline batteries to achieve operating time.

Rugby 620, Technical Data

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

38

Environmental
specifications

Temperature

Operating temperature Storage temperature

-20°C to +50°C
(-4°F to +122°F)

Protection against water, dust and sand

Protection

IPX7 (IEC 60529)

Dust tight

Protected against continuous immersion in water.

-40°C to +70°C
(-40°F to +158°F)

A100 Lithium-Ion
charger

A600 Lithium-Ion
battery pack

Type: Li-Ion battery charger
Input voltage: 100 V AC-240 V AC, 50 Hz-60 Hz
Output voltage 12 V DC
Output current: 3.0 A
Polarity: Shaft: negative, Tip: positive

Type: Li-Ion battery pack
Input voltage: 12 V DC
Input current: 2.5 A
Charge time: 5 hours (maximum) at 20°C

Rugby 620, Technical Data

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

39

12 Accessories

Accessories for
power supply

A100 - Li-Ion Charger (790417)

The A100 Li-Ion charger comes complete with four separate AC adaptors.

A130 - 12 Volt Battery Cable (790418)

The A130 12 volt battery cable connects the Rugby to a standard 12 volt automotive
battery as a backup for the unit’s battery. It is only usable with the rechargeable
battery pack. Length: 4 metres/13 feet.

A140 - Car Adapter Cable (797750)

The A140 car adapter cable connects the Rugby to a standard automotive accessory
jack as a backup for the unit’s battery or to charge in a vehicle. It is only usable with
a rechargeable battery pack. Length: 2 metres/6.5 feet.

A150 - Alkaline Battery Pack (790419)

The A150 alkaline battery pack is included as part of the standard alkaline package. It
can also be purchased separately to be used as a backup for rechargeable models.
Batteries required: Four D-cell type alkaline.

A600 - Li-Ion Battery Pack (790415)

The A600 Li-Ion battery pack is included as part of the standard rechargeable package.
It can also be purchased separately as an upgrade to the alkaline battery pack. It is
necessary to also purchase the A100, Li-Ion battery charger to complete the Li-Ion
battery solution.

A100

005798_001

A600

A130

A150

A140

Rugby 620, Accessories

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

41