Leica
Fluorescence
Ringlight
The new Leica-FLRL is especially designed for illumination tasks where a very uniform and
even light is required, like for microscopy or image processing. These, and the following
qualities, make the FLRL the ideal illumination system for a wide range of applications:
•
Constant colour temperature 5.500 K
•
Ripple- and flicker-free illumination by high-frequent current supply (25 kHz)
•
2-step-brightness control without variation of colour temperature
•
Increased lamp-life by a new smooth lamp ignition
•
360° – shadow free illumination
•
Unique ESD-safe model
•
Sound- and vibration-free operation
•
Universal mounting system for objectives up to 66 mm diameter
•
Easy and tool-free lamp change
•
Independent stand-alone operation possible
•
“Cold light”
•
Lamp-housing with anti-static qualities
The Illumination system consists of the following basic elements:
•
Fluorencence-ringlight with control unit
•
Protection granting
•
Wall mount AC adapter
Uniform and flicker-free
illumination
The system
The components
Fluorescence ringlight
The ringlamp provides the illumination area with bright, uniform and homogenous
light. A smooth ignition startup helps lengthen the service lifetime of the lamp.
The housing is not thermal conducting and is made of anti-static material which
adds to the ESD qualities. The simple and gentle mounting-system is adaptable for
objective-diameters up to 66 mm and can be fitted with custom-made adapters
for special applications.
Protection grating
The grating is an optional feature of the Leica fluorescence light to prevent
accidental contact of the bulb by the user. Contact between the operator and the
bulb could result in an unwanted static discharge, which could damage materials
sensitive to ESD.
The metal fence is conductive and connects to a special ESD socket to prevent
electro-static discharge.
Control unit
The control unit supplies the ringlight with a high frequency current (25 kHz) which
is responsible for the flicker-free and homogenous light of the fluorescence ringlight. The system operates vibration- and noise free and can be supplied with a
portable battery power supply. The control box has a on/off switch, a two level
brightness switch and an ESD socket.
Goose neck
The goose neck can be connected directly to a microscope or – in combination
with the base plate – the system can be run in stand-alone mode.
Spare parts and accessories
30 310 001 Set ringlight standard with control unit
30 310 009 Set ringlight high-performance with control unit
30 310 010 Set ringlight UV with control unit
30 211 011 Wall mounted AC power supply 100–240 V AC, 24 V DC/15 W*
30 310 002 Lamp standard 5,500 K
30 310 008 Lamp high-performance 5,500 K
30 310 007 Lamp UV
30 310 003 ESD protective grid
30 320 001 Mounting adapter for goose neck mount
30 320 002 Goose neck M5 200 mm
30 221 008 Base plate with M5 adapter for goose neck
*
Additional power cables are not necessary with the wall mounted power supply.
Goose neck
30 320 002
Base plate
30 221 008
Set Ringlight standard
with control unit 30 310 001
Set Ringlight HP
with control unit 30 310 009
Set Ringlight UV
with control unit 30 310 010
Mounting
adapter
30 320 001
Lamp standard
30 310 002
Lamp HP
30 310 008
Lamp UV
30 310 007
Protective grid
30 310 003
Technical data
Subject to change without notice. 400403
Fluorescent ringlight
Lamp annular arched fluorescent lamp
Colour temperature 5,500 K
Dimension max. 98 x 170 mm, height: 37 mm
Mounting clamp with screws, optional: mounting element for goose neck
Lamp housing white synthetic ESD material, surface resistance (10 E9–10 E11 Ohm/sq)
(connected with ESD socket on ballast via 10 MOhm protective resistor)
Expected service life standard lamp 2,000–3,000 hrs
HP lamp 5,000–7,000 hrs
Electronic control unit
Power supply 24 V DC +/– 1 V, hollowplug 5.5 x 2.1 mm, 450 mA
or 12 V DC (12–16 V DC), 1 A @ 12 V
On/off switch
Switch for 2 brightness settings
Dimensions 95.5 x 64 x 28.5 mm
ESD connection 4 mm banana pin
Ø 66.5
37
8.5
32.5
64
95.5
Ø 98
Ø 40
169
Tel. +41 (0) 71 / 726 33 33
Fax +41 (0) 71 / 726 33 99
www.leica-microsystems.com
Leica Microsystems AG
Business Unit SMS
Max-Schmidheiny-Strasse 201
CH-9435 Heerbrugg/Switzerland
Loading...