LEI PLJOGBK User Manual

Jogger Bluetooth Stereo Headset

Water Resistant, Sports Use

USER GUIDE PLJOGBK

1. Product Description

The PLJOGBK is a lightweight in- ear sport headphone, featuring a fashionable
sport design, water resistance and excellent stereo sound. The PLJOGBK is the
ideal choice for active pursuits such as jogging and exercising.

Jogger Earplug fitting diagramHow to wear Jogger

Left Right

Keep same

direction

- 1 -

2. Product Over view

1. Speaker

2. Next

3. LED Indicator

4. Previous

5. Headband

6. Charging Socket

7. Multi-Function Button (MFB)

8. Microphone

9. Volume Down

10. Volume Up

What's in the box:

• Jogger Bluetooth Headset

• USB charging cable

• Manual

• Warranty card

• Carry pouch

• Silicone ear buds

- 2 -

5

3

4

6

2

1

8

10

9

7

3. Charging

The PLJOGBK uses a 2.0 mm jack charging socket.

1. For first time use, charge the device for no less than 2 hours to make sure the
headset is fully charged and the batter y reaches its full capacity.

2. Each charge cycle thereaf ter may take around 2 hours.

3. LED will indicate red when charging and will turn off when charging is complete.

4. If you have not used the item for a few months, the LED might not turn red when
charging is started. It might take 15-35 minutes before the LED turns red.

Notice:

• Use the supplied certified charger only, or consult technic al support if you intend

to use other 3rd party charger(s).

• When the battery power is low, the red indicator light will flash red every 15 seconds.

4. Turn On / Off

• Turn On: From OFF, press and hold the MFB around 4 seconds until the indicator
LED shows Blue.

• Turn Off: From ON, press and hold the MFB around 4 seconds until the indicator
LED shows red.

5. Using with mobile phone

It is important to pair the headset with your Bluetooth Mobile phone for first time use.

- 3 -

5.1 Pairing procedure:

1. Ensure the headset is off.

2. Press and hold the MFB button (about 7 seconds) until LED blinks blue and red
alternately.

3. Follow the instructions for your mobile phone to search for Bluetooth devices.

4. Once “Proline Jogger" is found in the search list, follow the instructions for your
mobile phone to enter pin code 0000 to pair (some phones do not request the pin
code).

5. Verify that the headset is paired to your phone and it is now ready for use.

Once paired and connected, the headset will be automatically reconnect to your
phone whenever you turn the headset on again, provided your phone is in range and
Bluetooth is turned on.

We have found that many technical support questions are related to improper pairing

between the headset and the Bluetooth device. Please follow the instructions
carefully.

5.2 Basic Operations:

• Answering a call:

Answering the first call: Press the MFB button once to answer the first call.
Answering the second call: If a second call comes in while you are on a call,
press the MFB button to answer the second call. Please note this action will end

- 4 -