
Buffalo – Electronic Keypad Cabinet Lock
Protect your valuables and personal effects with the Buffalo Electronic Keypad
Cabinet lock for cabinets and wardrobes
Installation Guide

Step 1
•What kind of cabinet construction do you have?
Step 2
•Drilling for Keypad
side
panel
door
side
panel
2
Drill the
through-hole
24mm
Mark the center
of the hole!
Add 46mm plus X
Dimension “X” is
depending on
your individual
cabinet
follow indication B in Step 2
follow indication A in Step 2
Mark the center
of the hole!
side panel inside
Drill the
through-hole
24mm

Step 3
•Fitting the striker plate to the side panel
Step 4
•Fitting the components
Fix the striker plate with the
Fit the striker plate flush with edge of
position striker plate
is depending on the
thickness (X) of the door
striker plate
flush with edge
of the side panel
Principle overview of mounting Box
M400, connecting cable and Keypad with frame
Box-M400 (see Step5)
laying of the connecting cable
Keypad Frame
2x screw 3x30

Step 5
•Fitting the M400
Step 6
•Read the Operating Instructions
Everything about BUFFALO functionality. Personal locking, public locking, automatic locking
…don’t wait, go on!
BUFFALO Start-up
• Installing
• Setup
BUFFALO programming
• program your individual code
• use BUFFALO as a personal or
public lock
www.lehmanncabinetlocks.com/category/electronic-locks