LEGRAND KEOR MULTIPLUG 600, KEOR MULTIPLUG 800 VA Installation Manual

®

Part. LE07603AA-09/14-01 GF

KEOR MULTIPLUG

600, 800 VA

Manuel d’installation • Installation manual

2

ENGLISH 3

EN

KEOR MULTIPLUG 600, 800 VA

®

3

KEOR MULTIPLUG 600, 800 VA

EN

Index

1 Introduction 4

2 Condition of use 4

3 Installation 5

4 UPS Software 8

5 Signals and control 9

6 Battery replacement 10

7 Possible malfunctioning 12

8 Technical features 13

4

®

1 Introduction

The Keor Multiplug is an Uninterruptible Power Supply (UPS) designed for home and commercial
applications. This manual contains information for users of the Keor Multiplug 600,800 VA models.
You are advised to read carefully this handbook and the safety instruction sheet included in
the packaging before installing your uninterruptible power supply, meticulously following the
instructions given herein. In case of problems with the UPS, please read this manual before
contacting the technical support;
Please download the latest version of the manual from the website: www.ups.legrand.com.

• The UPS has been designed to supply data processing equipment; The load applied must not
exceed the one indicated on the rear label of your UPS.

Ensure that the input voltage of the UPS matches the utility supply voltage. Use a certified input

power cable with the correct plugs and sockets for the system voltage.

• The ON/OFF button of your UPS does not electrically isolate the internal parts. To isolate your
UPS unplug it from the mains power socket.

• Do not open the UPS enclosures since there may be parts inside with dangerously high voltage
even when the mains plug is disconnected; there are no parts inside that the user can repair.

• The front control panel is provided for manual operations; Do not press on the panel with sharp
or pointed objects.

• The UPS Keor Multiplug has been designed to work in closed, clean rooms where there are no
inflammable liquids or corrosive substances and where it is not too damp.

• Do not place near equipments that generate strong electro-magnetic fields and/or near
equipments that are sensible to electro-magnetic fields. (engines, floppy disks, speakers,
adapters, monitors, video, etc...)

• Do not pour any liquid on the UPS or inside the UPS.

• Do not place the UPS in humid environment or near liquid, such as water, chemical solution…

• Do not expose the UPS to the direct sunlight or any heat sources.

Ensure that the installation site is free from excessive dust and the ambient temperature and

humidity are within the specified limits.

• Do not place the UPS in a dusty or corrosive environment or near any flammable objects.

This UPS is not designed for outdoor use.

• To prevent overheating of the UPS do not place anything on top of the UPS. Keep the UPS 20 cm
away from others objects or obstructions.

• Use grounded power cable to connect the UPS to the mains supply.

Ensure that the AC mains supply is securely grounded.

• Install the UPS close to the mains socket that supply it. The socket must be easily accessible.

• Always switch off the UPS and disconnect the batteries when relocating the UPS. Be aware that,
even when disconnected, charged batteries present a possible electric shock hazard.

• The UPS should be recharged every 2-3 months if unused. When installed and being used the
batteries will be automatically recharged.

2 Condition of use

5

KEOR MULTIPLUG 600, 800 VA

EN

3 Installation

3 100 38
3 100 39

3 100 40
3 100 41

GF

03

/

20

13-

0

1

??????

®

x

x

x

xx

x

http://ups.legrand.com/biblioteca/

100%

8 Hours

200 mm

200 mm

200 mm

LASER

SCANNER

-

+