![](/html/cd/cd02/cd02bdfa98c7df7392b24ca50616a05566373ee5c3c039c6dc15bd35aa65ea88/bg1.png)
Evolution™Series Floor Boxes
Activation Covers
I N S T A L L A T I O N I N S T R U C T I O N S
Installation Instruction No.: 1 008 980R1 – Updated March 2012
Products Covered:
Legrand/Wiremold electrical systems conform to and should be
properly grounded in compliance with requirements of the current
National Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire
hazard if improperly installed or used. Legrand/Wiremold electrical
products may bear the mark of a Nationally Recognized Testing
Laboratory (NRTL) and should be installed in conformance with current
local and/or the National Electrical Code.
IMPORTANT: Please read all instructions
before beginning.
EFB610CTC
CAUTION: Do not operate floor scrubbers, tile strippers, or resurfacing equipment over the top of the cover. This may result in damage
to the surface of the product.
CAUTION: Wash covers with a mild soap solution. Avoid any cleaning solutions with ingredients that may react with the aluminum
construction of the products.
EFB610BTC
EFB610CT EFB610BT
TRIM FLANGE INSTALLATION:
1. PREPARATION: Before installing cover, repair any
cracks or chips around the preset or floor box opening
using a suitable grout or repair compound.
3. INSTALLING GASKET (Carpet Installation):
Place gasket onto the underside of the trim
ring as shown. Ensure that gaskets make a
continuous seal around the trim ring.
2. EFB610CTC, EFB610BTC Series – Flanged Carpet
Installation Cut opening in carpet as indicated in illustration.
12 1/8"
[308mm]
16 1/8"
[410mm]
3a. Flanged Carpet Installation: Installation view of
gasket and carpet.
Carpet Gasket
(compressed)
Flat
Gasket
Flange
Carpet
![](/html/cd/cd02/cd02bdfa98c7df7392b24ca50616a05566373ee5c3c039c6dc15bd35aa65ea88/bg2.png)
4. Flanged Tile Installation – FLUSH: Use Tile Shim Kit
EFB610-TS) for tiles thicker than 3/16" [4.8mm].
(
Flat
Gasket
Flange
Apply Grout or
Silicone Compound
at Joint
ile (3/16"
T
4.8mm])
[
4a. Flanged Tile Installation – SURFACE: Place cover
assembly onto finished tile floor as shown.
Flat
Gasket
lange
F
Tile
ARPET INSERT TEMPLATE
C
0 3/4"
1
273mm]
[
4b.Flanged Terrazzo Installation – FLUSH: For flush terrazzo
or concrete applications, use EFB610-CTR, Terazzo Trim
Ring. For pours greater than 1/4" [6.4mm], also use
EFB610-TS Tile Spacer Kit.
Flange
Flat
Gasket
Terrazzo Trim Ring
Terrazzo
1/4"
[6.4mm]
5. ATTACHING THE COVER (Flanged): Slide sealing Washer
over Attachment Screw and mount Flange to Floor Box.
For adjustments greater than 1/2" [12.7mm], use 10-24 x
1.5 cap head screw (not provided).
Attachment
Screw (4X)
Sealing
Washer (4X)
3 3/8"
[86mm]