LEGRAND ECONOMY EXIT SIGN ER2 Installation Instructions Manual

ER2 ECONOMY EXIT SIGN

INSTALLATION INSTRUCTIONS

Ceiling-mounted

Wall-mounted

Specifications:

Cat No. 684447, 684449, 684454,
684474, 684478, 684480
Supply Voltage 230-240V a.c.
Frequency 50Hz
Power Input Watts (max)
Watts (low rate charge)

Application:

This product is designed and tested to comply with AS2293.3
(2005) Appendix C (Photometric) and Appendix D (thermal) as an
Emergency Exit sign for single or double-sided applications. It
is a single-point unit for non-network applications. Selection of
mounting location, height and spacings should be undertaken
in accordance with the requirements of relevant local codes and
standards. Emergency classification can be determined from
Legrand literature web-site and product labelling. This sign is
suited to Maintained or Non-Maintained operation, according to
input connections.

Dimensions:

Single sided (wall mount)

50mm50

mm

180mm

Product preparation

377mm

Double sided (ceiling mount)

180mm

50mm

178mm

Mounting holes

292mm

377mm

94mm

24m

legrand

ER2 ECONOMY EXIT SIGN

INSTALLATION INSTRUCTIONS

Diffuser sheet installation

Main supply connection

10mm

Unswitched

active

Earth

Neutral

Diffuser mounting

24m

legrand

24m

legrand

Repair & Upgrade:

ER2 is designed to be upgraded in the future by replacement of the
Battery Pack, LED light engine or Power Supply as required.

Brown

Green/Yellow

Black

Due to ongoing improvements in technology, the components
available may change. For current information, please consult the
HPM Legrand website or an authorised maintenance provider.

Replacements Parts:
686240 Battery Pack AA4LNICD
686260 LED replacement strip

Active

Red

!Active and unswitched active must be on same phase
‘Maintained’ operation, link switched active with unswitched active

Warranty

HPM will honour all statutory guarantees that you as a consumer
are entitled to rely upon under the Australian Consumer Law
against a manufacturer including a guarantee that this product is
of acceptable quality.

To make a claim under any statutory guarantee you should first
contact the supplier, or retailer from whom you purchased the
Product.

Customer Service

For all Customer Service and Technical Support enquires please
call Monday to Friday during business hours.

HPM Legrand Australia
1300 369 777
www.hpmlegrand.com.au

HPM Legrand New Zealand
0800 476 009
www.hpmlegrand.co.nz

ABN: 31 000 102 661