Page 1
Synergy® grid system
installation options : flush and surface mounting
■ Flush mounting installation examples
2 modules
Back box
0891 13
35 mm depth
Support frame
7354 91
Modules
7354 00 x 2
Frontplate
7301 92
8 modules
Back box
0818 52
43 mm depth
18 modules
Back box
Support frames
7354 92 x 2 7301 83
Support frames
Modules
7354 00 x 8
Modules
Frontplate
Frontplate
7354 00 x 18
7301 86
0818 54
56 mm depth
7354 93 x 3
■ Surface mounting installations
Surface mounting of Synergy grid modules can be achieved by using components illustrated in the table below
1 or 2 modules 3 or 4 modules 6 or 8 modules 9 or 12 modules
Box dimensions
Surface box
(no knockouts)
Surface box
(with knockouts)
86 x 86 x 37 86 x 146 x 37 146 x 146 x 37 207 x 146 x 37
7364 00 7364 01 7364 18 7364 28
7364 20 7364 21 7364 22 7364 32
■ Support frame selection for front plates (1-4 modules)
Support frames required for clip-on plates differ from suppor t frames for screw-attached faceplates
Support frames required for Modern clip-on plates are Cat. Nos. 7354 81 (1 or 2 modules) and 7354 82 (3 or 4 modules)
Support frames required for white, traditional and metalclad plates (screw attached) are Cat. Nos. 7354 90 (1 module), 7354 91 (2 modules),
and 7354 92 (3 or 4 modules)
91
Loading...