Leggett & Platt PREMIER FOUNDATION DESIGN, PREMIER FURNITURE DESIGN Owner's Manual
PREMIER
owners manual
™
ENGLISH
SPANISH
FRENCH
PREMIER™ FOUNDATION DESIGN
PREMIER™ FURNITURE DESIGN
LPAdjustableBases.com
CONTENTS
CONTENTS
Advisory ...................................................................................................................... 4
LP Sense® Technology .................................................................................................. 6
Acoustics .................................................................................................................... 7
Fabric Cleaning Information .......................................................................................... 7
Installation ................................................................................................................. 8
USB / Power Outlets .................................................................................................. 21
Remote Control Function ............................................................................................ 22
Remote Control Programming ..................................................................................... 23
Troubleshooting ......................................................................................................... 26
Accessories ............................................................................................................... 28
1-3-25 Warranty ........................................................................................................ 29
Spanish translation begins on page 31.
La traducción en español inicia en la página 31.
French Canadian translation begins on page 59.
La traduction en Français débute à la page 59.
If adjustable base does not operate or if parts are missing, call:
800-888-3078
Do not contact retail store or dealer.
IMPORTANT INFORMATION
READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT
FOR OPTIMUM ADJUSTABLE BASE
OPERATION, USE A GROUNDED, ELECTRICAL
SURGE PROTECTION DEVICE (NOT
INCLUDED). FAILURE TO USE A SURGE
PROTECTION DEVICE COULD COMPROMISE
SAFETY OR CAUSE PRODUCT MALFUNCTION.
ELECTRICAL RATING
Input - 120VAC, 50/60Hz, 1.8A; Output -
29VDC, 7A.
ADVISORY
PRODUCT RATINGS
The base lift motors are not designed for
continuous use. Reliable operation and full
life expectancy will be realized as long as
the lift motor operation does not exceed five
(5) minutes over a fifty (50) minute period,
or approximately 10% duty cycle. Note:
Massage equipped bases are not designed
for continuous, extended massage operation.
Massage systems are rated for a maximum
of 2 hours of use within any 6 hour period.
Any attempt to circumvent or exceed product
ratings will shorten the life expectancy of the
product and may void the warranty.
ELECTRICAL GROUNDING
This product is equipped with a polarized or
grounded electrical power cord. The power cord
will only fit into a grounded, electrical surge
protection device (not included) or a grounded
electrical outlet.
WARRANTY WARNING
Do not open any control boxes, motors or
remote control devices (with the exception of
the remote control and power down box battery
compartments). The product warranty will be
void if these components are tampered with. Do
not attempt to alter component wiring or adjust
or modify the structure of the product in any
way or the warranty will be void. Any repair or
replacement of base parts must be performed
by authorized personnel.
LUBRICATION
This product is designed to be maintenance
free. The lift motors are permanently lubricated
and sealed—no additional lubrication is
required. Do not apply lubricant to lift motor
lead screws or any nylon nuts or the base may
inadvertently creep downward from the elevated
position.
The recommended maximum weight (including
mattress) is 700 lb (317 kg) distributed evenly
across the base. This product is not designed
to support or lift this amount in the head
or foot sections alone. Note: Exceeding the
recommended weight restrictions could damage
the base and void the warranty.
For best performance, consumers should enter
and exit the adjustable base with the base in
the flat (horizontal) position. Avoid placing
entire weight on head or foot section of the
base, including when in the raised position.
NOT STAND ON BASE AT ANY TIME.
DO
UL (Underwriters Laboratories) recognized
components.
CFR 1633 approved for use with most
mattresses.
Assembled in USA.
Premier Series™ Owners Manual 99301588-b
4
ADVISORY
IMPORTANT INFORMATION
READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT
SMALL CHILDREN / PETS WARNING
After the base is unboxed, immediately dispose
of packaging material as it can smother small
children and pets. To avoid injury, children or
pets should not be allowed to play under or on
the base. Children should not operate this base
without adult supervision.
PACEMAKER WARNING
This product produces a vibrating sensation.
It is possible that individuals with heart-assist
pacemakers may experience a sensation similar
to exercise. Consult physician for complete
information.
HOSPITAL USE DISCLAIMER
This base is designed for in-home use only. It
is not approved for hospital use and does not
comply with hospital standards. Do not use this
base with tent type oxygen therapy equipment,
or use near explosive gases.
PINCH POINT WARNING
DURING BASE OPERATION, GAPS (PINCH
POINTS) ARE CREATED (ARROWS IN FIGURE
1). A CHILD, A PERSON’S LIMB, OR A
PET CAN BECOME ENTRAPPED AT THESE
LOCATIONS. DURING USE, AND WHEN BASE
IS IN THE RAISED POSITION, ALWAYS KEEP
GAP AREAS (PINCH POINTS) CLEAR AND
KEEP ALL LIMBS ON TOP OF BASE. FAILURE
TO FOLLOW THIS WARNING COULD RESULT
IN SERIOUS INJURY OR DEATH.
FIGURE 1
TYPICAL PINCH POINTS
SERVICE REQUIREMENTS
Service technicians are not responsible for
moving furniture, removing headboards and
footboards or any items required to perform
maintenance on the base. In the event the
technician is unable to perform service due
to lack of accessibility, the service call will
be billed to the purchaser and the service will
have to be rescheduled.
FCC COMPLIANCE
Components meet Class B digital device
rating (Part 15, FCC rules) for residential use.
Adjustable bases generate, use and may radiate
radio frequency energy. Radio communication
may be affected if not installed and operated
as recommended in this manual. Changes
or modifications not approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
Radio frequency = 2.4GHz.
FURNITURE
DESIGN SHOWN
Premier Series™ Owners Manual 99301588-b
5
LP Sense® TECHNOLOGY
IMPORTANT INFORMATION
READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT
LP Sense
®
TECHNOLOGY
The Premier™ Furniture Design is equipped
with LP Sense® technology (FIGURE 2). LP
®
Sense
has been engineered to help detect
human or animal presence in specifi c areas
of the adjustable base that have moving
mechanical parts or potential pinch points.
®
When LP Sense
is triggered by human or
animal contact, your adjustable base will stop
movement. To reactivate the base, simply
remove the obstruction and continue with the
previous function. When LP Sense® is triggered,
the underbed light fl ashes. When obstruction is
removed, underbed light stops fl ashing. If the
base does not begin movement again, please
see the Troubleshooting Guide contained within
this Owners Manual to reset LP Sense®. The LP
Sense® contact points include the top perimeter
of the upholstered surround on a Furniture
Design, as shown in FIGURE 3.
FIGURE 2
LP Sense® MODULE
(attached to the
underside of the base)
FIGURE 3
TYPICAL LP Sense
CONTACT POINTS (entire
perimeter of upholstered
surround on Furniture Design)
®
FURNITURE
DESIGN SHOWN
Although LP Sense® technology is designed to
help prevent human or animal accidents while
the base is being adjusted, the presence of LP
Sense® is not a guarantee of safety and does
not eliminate the possibility of an accident.
DURING USE, AND WHEN BASE IS IN THE
RAISED POSITION, ALWAYS KEEP GAP
AREAS (PINCH POINTS) CLEAR AND KEEP
ALL LIMBS ON TOP OF BASE. FAILURE TO
FOLLOW THIS WARNING COULD LEAD TO
SERIOUS INJURY OR DEATH.
Premier Series™ Owners Manual 99301588-b
6
Premier Series™ Owners Manual 99301588-b
ACOUSTICS
LIFTING/LOWERING MECHANISMS
The lift/lower feature will emit a minimal
humming sound during operation. This is
normal.
During operation, the lift arm wheels make
contact with the platform support of the base.
This applies slight tension on the moving
components and resonance is reduced to a
minimum level. If excessive noise or vibration is
experienced, reverse the movement action (up or
down) of the base with the remote control. This
should realign the base’s activating mechanisms
to the proper operational position.
MASSAGE OPERATION
The massage feature will emit a minimal tone
during operation. This is normal. When the
massage level is increased, motor resonance
will intensify accordingly.
FABRIC CLEANING INFORMATION
LOCATION ENVIRONMENT
The level of sound experienced during
operation is directly related to the location
environment. For example, when a base is
located on a hardwood floor with the massage
feature in operation, a vibrating tone will be
audible. To minimize this resonance, place a
piece of carpet, or rubber caster cups, under
each leg or caster of the base.
It is possible to experience vibration or noise
from the headboard brackets, headboards or
footboards if mounting bolts are not firmly
tightened.
Spot clean only with water based shampoo
or foam upholstery cleaner. Pretest a small,
inconspicuous area before proceeding. Do
not over wet. Do not use solvents to spot
clean. Pile fabrics may require brushing with
a non-metallic, stiff bristle brush to restore
appearance. Hot water extraction or steam
cleaning is not a recommended cleaning
method.
To prevent overall soiling, frequent vacuuming
or light brushing with a non-metallic stiff
bristle brush to remove dust and grime is
recommended. When cleaning a spill, blot
immediately to remove spilled material. Clean
spots or stains from the outside to the middle
of the affected area to prevent circling. Use a
professional furniture cleaning service when an
overall soiled condition is apparent.
7
INSTALLATION
For installation and setup, complete the following procedures, in the order indicated below
and on the following pages:
STEP 1
Before discarding any packing materials,
check the adjustable base shipping carton
and verify the following items are
included:
• (1) Mattress Retainer
• (1) Remote Control
• (4) Bed Legs
(varies according to base type)
• (2) Headboard Bracket Assemblies (varies
according to base type)
• (1) Headboard Bracket Hardware Kit (blister card)
• (1) Power Cord
• (1) Power Supply Brick
• (1) Bedroom Accessory Control
• (1) Dual Sync Cable
(split size bases only)
• (1) Warranty Activation Card
• (1) Quick Setup Guide
BEDROOM ACCESSORY
CONTROL
POWER SUPPLY
BRICK
POWER CORD
MATTRESS
RETAINER
(1 per base)
REMOTE CONTROL
(2) Bracket Weldments*
HEADBOARD BRACKET ASSEMBLIES - HARDWARE
*Varies according to base type. Furniture Design shown.
(4 bracket pieces, hardware blister card)
(2) Flange Weldments*
Blister Card
QUICK SETUP GUIDE
DUAL SYNC CABLE
split size bases only
WARRANTY
ACTIVATION CARD
5/16-18 Threads
M-8 Threads
WOOD
Furniture Design*
LEG
(4 pieces)
*Varies according to base type:
Either Square Wood Leg or Steel Leg.
Steel Leg not compatible with Furniture
Design.
STEEL
Foundation Design*
Premier Series™ Owners Manual 99301588-b
8
INSTALLATION
STEP 2
With packing carton still on adjustable base (with
bottom of base exposed), install 4 legs. Simply
screw each leg (wood or steel) into a tapped hole at
each corner of the base frame (FIGURES 4 and 5).
Note: Allowing base to remain in packing carton will
prevent it from laying on an unclean surface.
FIGURE 4 (FURNITURE DESIGN)
WARNING
AT LEAST TWO PEOPLE ARE
RECOMMENDED FOR HANDLING AND
MOVING ADJUSTABLE BASE.
CAUTION
DO NOT ATTEMPT TO SCREW
LEGS INTO ANY OTHER INSERTS.
THIS WILL DAMAGE PRODUCT.
FIGURE 5 (FOUNDATION DESIGN)
LEGS – SCREW
INTO TAPPED
HOLE AT
EACH CORNER
PUSH PIN IN
TO ADJUST LEG
HEIGHT
(6 INCHES TO
10 INCHES)
Premier Series™ Owners Manual 99301588-b
9
Loading...