Leggett & Platt Plymouth K-132 Owner's Manual

owners manual

K-132

Plymouth

CONTENTS

Advisory ...................................................................................................................... 3

Assembly .................................................................................................................... 5

Remote Control Function .............................................................................................. 9

Remote Control Programming ..................................................................................... 10

Power Down Operation ............................................................................................... 12

Troubleshooting ......................................................................................................... 13

Warranty ................................................................................................................... 14

READ ALL INSTRUCTIONS BEFORE USING

If adjustable base does not operate or if parts are missing, call:

1-800-888-3078

3

ADVISORY

FOR OPTIMUM ADJUSTABLE BASE

OPERATION, USE A GROUNDED, ELECTRICAL

SURGE PROTECTION DEVICE (NOT

INCLUDED). FAILURE TO USE A SURGE

PROTECTION DEVICE COULD COMPROMISE

SAFETY OR CAUSE PRODUCT MALFUNCTION.

WARNING

!

READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT

IMPORTANT INFORMATION

ELECTRICAL RATING

Input: 100-240VAC, 50/60Hz, 1.6A. Output: 29VDC, 1.8A.

ELECTRICAL GROUNDING

This product is equipped with a polarized or grounded
electrical power cord. The power cord will only fit into a
grounded, electrical surge protection device (not included)
or a grounded electrical outlet.

WARRANTY WARNING

Do not open any control boxes, motors or remote control
devices (with the exception of the remote control and
power down box battery compartments). The product
warranty will be void if these components are tampered
with. Do not attempt to alter component wiring or adjust
or modify the structure of the product in any way or the
warranty will be void. Any repair or replacement of base
parts must be performed by authorized personnel.

LUBRICATION

This product is designed to be maintenance free. The
lift motors are permanently lubricated and sealed—no
additional lubrication is required. Do not apply lubricant
to lift motor lead screws or any nylon nuts or the base may
inadvertently creep downward from the elevated position.

PRODUCT RATINGS

The base lift motors are not designed for continuous use.
Reliable operation and full life expectancy will be realized
as long as the lift motor operation does not exceed
two (2) minutes over a twenty (20) minute period, or
approximately 10% duty cycle. Note: Massage equipped

bases are not designed for continuous, extended massage
operation. Massage systems are rated for a maximum of
2 hours of use within any 6 hour period. Any attempt to

circumvent or exceed product ratings will shorten the life
expectancy of the product and may void the warranty.

The recommended maximum weight (including mattress)
is 700 lb (318 kg) distributed evenly across the base.
This product is not designed to support or lift this amount
in the head or foot sections alone. Note: Exceeding the

recommended weight restrictions could damage the base
and void the warranty.

For best performance, consumers should enter and exit
the adjustable base with the base in the flat (horizontal)
position. Avoid placing entire weight on head or foot
section of the base, including when in the raised position.

DO NOT STAND ON BASE AT ANY TIME.

UL (Underwriters Laboratories) recognized components.

CFR 1633 approved for use with most mattresses.

LOCATION ENVIRONMENT

The level of sound experienced during operation is directly
related to the location environment. For example, when
a base is located on a hardwood floor with the massage
feature in operation, a vibrating tone will be audible.
To minimize this resonance, place a piece of carpet, or

rubber caster cups, under each leg or caster of the base.

4

ADVISORY

READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT

IMPORTANT INFORMATION

SERVICE REQUIREMENTS

Service technicians are not responsible for moving
furniture, removing headboards and footboards or any
items required to perform maintenance on the base. In
the event the technician is unable to perform service due
to lack of accessibility, the service call will be billed to
the purchaser and the service will have to be rescheduled.

FCC COMPLIANCE

The equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a residential environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver.

- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV
technician for help.

This device complies with Part 15 of the FCC rules.
Operation is subject to the following conditions: (1)
This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.

FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.

Radio Frequency = 2.4GHz.

LIFTING/LOWERING MECHANISMS

The lift/lower feature will emit a minimal humming sound
during operation. This is normal. If excessive noise or
vibration is experienced, reverse the movement action
(up or down) of the base with the remote control. This
should realign the base’s activating mechanisms to the
proper operational position.

PACEMAKER WARNING

This product produces a slight humming sensation. It is
possible that individuals with heart-assist pacemakers
may experience a sensation similar to exercise. Consult
physician for complete information.

MASSAGE OPERATION

The massage feature will emit a minimal tone during
operation. This is normal. When the massage level is
increased, motor resonance will intensify accordingly.

SMALL CHILDREN / PETS WARNING

After the base is unboxed, immediately dispose of packaging
material as it can smother small children and pets. To avoid
injury, children or pets should not be allowed to play under
or on the base. Children should not operate this base without
adult supervision.

HOSPITAL USE DISCLAIMER
This base is designed for in-home use only. It is not
approved for hospital use and does not comply with
hospital standards. Do not use this base with tent type
oxygen therapy equipment, or use near explosive gases.
Manufacturer makes no representation or warranty that
the adjustable base constitutes a medical device or is
suitable for medical or therapeutic use.

5

To assemble adjustable base, complete the following procedure:

ASSEMBLY

STEP 1
Place adjustable base shipping container on solid, level

surface. Remove top section of shipping container. Remove
packing material. Carefully, lift adjustable base out of
bottom section of shipping container and place on clean
surface.

Open the base shipping carton and verify the following
items are included:

• (1) Mattress Retainer (zip-tied to base frame)

• (6) Bed Legs

• (1) Remote Control

• (2) AAA Batteries (for remote control)

• (1) Power Supply (power brick and

electrical power cord)

• (1) Sync Cable (split sizes only)

• (1) Owners Manual

• (1) Warranty Activation Card

Cut the zip-ties and remove the
mattress retainer. Caution: Exercise

caution when using sharp instruments.

DUE TO RISK OF INJURY, TWO ADULTS

ARE REQUIRED TO HANDLE AND MOVE

ADJUSTABLE BASE.

WARNING

!

WARRANTY

ACTIVATION CARD

OWNERS MANUAL

2-AAA BATTERIES

for remote control

LEGS

(6 pieces)

MATTRESS

RETAINER

*not shown

zip-tied to

base frame

REMOTE CONTROL

POWER SUPPLY

(power brick and electrical power cord)

SYNC CABLE

split sizes only