Legacy Classic 892-4724K User Manual
Assembly Instruction Storage Bed Rail
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts that may have come loose inside the carton during shipment.
Caution: (1) These parts are cumbersome and heavy. This product can best be assembled with the assistance of
one or more persons in order to prevent personal injury and to insure parts are not damaged during the assembly
process. If dirty, clean finished parts with mild dishwashing liquid and water solution applied on damp cloth.
Cloth should not be excessively wet. Polish finish with soft cloth and an industry recognized furniture polish.
(2) To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for
stain residue and rough surfaces and also check for staples or nails left after removing the packaging material. The
manufacturer will not be held responsible if preventative steps are not taken prior to installation.
(3) Unpack and dispose of all packing material but be careful not to throw away any assembly parts or
hardware. Read the instruction sheet and parts list carefully. Remove all staples and screws used for packaging
carefully using pliers and or screwdrivers to prevent injury and scratching or damaging flooring.
(4) During normal use everyday, bolts and nuts may loosen up. They should be periodically inspected
and re-tightened to prevent damage to the furniture and (or) personal property or cause injury. Always check to be
sure all hardware on this list is attached to the furniture properly and kept tightened at all times.
PARTS List
Description
A B
Description
QTY
1PC
Assembly Procedures:
Please be advised that there are two different side rails: one rail (C) marked with a sticker “L”, which is the left
facing side rail, and the other rail (D) marked with a sticker “R”, which is the right facing side rail. Please don’t
mix these two rails when installing the rails into the headboard/footboard.
A
Page 1 of 1
C
B
Loading...