Assembly Instructions For Youth Metal Beds
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come
loose inside the carton during shipment.
Caution:(1) These parts are cumbersome and heavy. This product can best be assembled with the assistance of one or more
persons in order to prevent personal injury and to insure parts are not damaged during the as sembly process. If dirty, clean finished
parts with mild dishwashing liquid and water solution ap p lie d on damp clo th. Cloth sho u ld not be excess ive l y w et. Polish fi n ish w ith
soft cloth and an industry recognized furniture polish.
(2) T o prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residue and
rough surfaces and also check for staples or nails left after removing the packaging material. The ma nufacture r will not be held
responsible if preventative steps are not taken prior to installation.
Note: The bed should not be moved after it has been assembled without first disassembling the bedrails. Excessive movement
while the bedrails are locked into place may damage bedroom parts.
Assembly Procedures:
Step 1. Insert BOLT (2) through the hole which in the middle of the METAL PLATE and attach it to the CENTER SUPPORT LEG,
tighten it with ALLEN WRENCH(8).
Step2..On each rail,insert 4 BOLTS (1) through the BED RAIL and CENTER SUPPORT LEG, and then attach FLAT WASHER
(4), SPRING WASHER (6) and NUTS (3) to the BOLTS (1), tighten them with OPENING WRENCH (9) and
SCREWDRIVER (NOT PROVIDED).
Step 3. Attach the BED RAILS ASSEMBLY to the BED ENDS using ARC WAS HER (5), SPRING WASHER (7) and BOLT
(2), tighten them with ALLEN WRENCH (8).
Screwdriver
Hardware List
1
2
3
4
5
6
7
8
9
Bolts 1/4"
Bolts 5/16"
Nuts
Flat Washer
Arc Washer
Allen Wrench (bigger)
Opening Wrench
8PCS
8PCS
8PCS
8PCS
8PCS
8PCS
1PCS
1PCS
1
Headbaord Post
Bed Rail
7 2
5
Bed Rail
2
Bed Rail
p
p
u
S
r
e
t
n
e
C
g
e
L
t
r
o
Metal Plate
Parts List
Headboard
Footboard
Metal Plate
1PCS
1PCS
2PCS
Center Support Leg
Bed Rails
Special Instruction: During normal everyday use bolts and nuts may loosen up. They should be periodically inspected and
re-tightened to prevent damage to the furniture or cause injury. Always check to be sure all hardware on this list is attached and kept
tightened.
1PCS
4PCS
Center Support Leg
Assembly is now complete.