Legacy Classic 490-1000C User Manual

Assembly Instructions for Bun Feet

Step 1. Unpack carton and inventory parts.
Step 2. Open drawers and locate box packed inside containing Bun Feet.
Step 3. Turn unit on its back in order to access bottom. Insert DOWELS (4) into non-threaded holes on the

bottom of the unit and attach BUN FEET to the bottom of the unit use BOLT (3), SPRING
WASHER (2), FLAT WASHER (1), and tighten it with SCREWDRIVER. (Not Included)

Step 4. Turn unit upright carefully.
Note: During normal use everyday, bolts and nuts may loosen up. They should be periodically inspected and

re-tightened to prevent damage to the furniture and (or) personal property or cause injury. Always check to
be sure all hardware on this list is attached to the furniture properly and kept tightened at all times.

1

2

3

4

FLAT WASHER

SPRI NG W ASHER

BOLT

DOWEL

2

1

3

5/16"

5/16"

5/16"

40mm

4PCS

4PCS

4PCS

8PCS

4

5

Ste p 3

--The End--