Legacy Classic 3850-4434K User Manual
ASSEMBLY INSTRUCTIONS:
cleaned with a
3850-4433 CANOPY
Thank you for purchasing this quality product. Before beginning, please check the packing material carefully
for small parts which may have come loose inside the carton during shipping. Please do not discard any
packing material until all parts have been located. If any parts are missing, please contact your dealer for
prompt replacement.
Parts & Hardware List:
PARTS LIST
A
LOW POSTER BED
B
SHORT POST
C
LONG POST
LONG
D
STRETCHER
B
B
A
C
C
Q'TY
MEDIUM
1 PC
2 PCS 2 PCS
2 PCS
2 PCS
E/F
E
STRETCHER
SHORT
F
STRETCHER
G
FINIAL
D
PARTS LIST
D
E/F
Q'TY
2 PCS
4 PCS
G
G
G
G
Step 2
Step 3
Step 4
Assembly Procedures:
Step 1: Lay out all parts and hardware. Make sure the quantity of each is correct and the feet are free of stain,
staples, screws and nails.
Step 2: Assemble the short posts (B) to the head board and assemble the long posts (C) to the
footboard as shown.
Step 3: Insert the long stretchers (D) to the long & short posts as shown.
Insert the medium or short stretchers (E or F) to the long & short posts as shown.
Note
: The medium stretchers (E) are for full size 4/6 bed and the short stretchers (F) are for
twin size 3/3 bed.
Step 4: Assemble the finials (G) to the long & short posts as shown.
Caution: Over-tighting screws or bolts may result in damage. It is suggested that at least two people work
together for this assembly process to avoid injury. Following assembly, the furniture should be
quality, non-silicone furniture polish on a clean, soft cloth.
www.legacyclassickids.com
Loading...