Legacy Classic 2961-640-KD User Manual

c
k
c
ids
LL
Assembly Instruction 2960-640 Desk Chair
PARTS LIST:
# Description Qty. # Description Qty.
A Top Section 1 pc B Bottom Section 1 pc C Hardware Pack 1 bag
legacy classic
IMPORTANT NOTE:
1.USE ONLY THE HARDWARE SUPPLIED.
2.DO NOT OVER-TIGHTEN BOLTS
ASSEMBLY INSTRUCTIONS:
Step 1: Unpack, inspect, and read assembly instruction carefully. Lay out the parts and hardware. Make
sure the quantity of each is correct.
Step 2: Remove the plastic cap at the top of bottom section (B), the plastic cap is for protection only. Step 3: Insert the top section (A) into the tube of bottom section (B). Step 4: Fix the top section (A) and bottom section (B) with bolt which is already attached to the bottom
section per the diagram above. Tighten with the allen wrench (1).
Assembly is now complete. It is recommended to tighten the bolts periodically.
Loading...