Legacy Car Audio LR185D User Manual

WIRING CONNECTION

ANTENNA JACK

RED

RCA LINE OUT

WHITE

LEFT SPEAKER

GREEN

- -

SPECIFICATION

GENERAL

REAR CABINET

GROUND

AUTO ANT+ YELLOW

FUSE 0.5A

PINK

FUSE 3A

RED

GREY

BLACK

TO +12V BATTERY

B+ MEMORY

RIGHT SPEAKER

LEGACY

LR185D

INSTRUCTION MANUAL

Power Supply Requirements.......................DC 12 Volts. Negative Ground

Maximum Output Power.........................................................80 Watts

Chassis Dimensions............................................181(W)X147(D)X53(H)

FM SECTION

Frequency Range..........................................................88MHz-108MHz

AM SECTION

Frequency Range........................................................530KHz-1700KHz

ANTI-THEFT FULL DETACHABLE SYSTEM

WITH AM/FM TUNING RADIO

LOCATION AND FUNCTION OF CONTROLS

1. SEL AND +/- BUTTON Press it can select VOL/BAS/TRE/BAL. And with the +/- to adjust volume, treble, bass, balance, when select the VOL/BAS/TRE/BAL function, LED will indicate.

2. LOUD BUTTON Press it to get the best loudness quality during it is for bass. And word LOUD will indicate.

10. CLOCK ADJUSTMENT BUTTON When time on display push SET button and H or M button together at the same time to adjust HOUR or MINUTE. When adjustment is completed, release both buttons.

11. BAND BUTTON Press the button to select you desired band.

12. MO/ST BUTTON Press it to change sound effect. [MONO keep remain]

13. PWR BUTTON Press it to turn on or off the unit.

14. RELEASE BUTTON Press it to eject the front panel the unit.

INSTALLATION

3. EJECT BUTTON Press it to eject the tape.

4. FAST FORWARD/REWIND PROGRAM BUTTONS

5. LO/DX BUTTON Press this button for distance reception when you are located at weak signal location. Depress this button for stronger signal.

6. TUNE KNOB Rotate this knob to get your desired radio station.

7. LED INDICATORS

8. CD INPUT JACK

9. LCD [LIQUID CRYSTAL DISPLAY]