Legacy Audio Skyline Owners Manual

1. Warranty

2. Unpacking/Connections

3. Speaker Placement and Installation

5. Designer’s Note

6. Cabinetry/Our Commitment

7. Specifications

8. Hook Up Cables

9. The Amplifier

10. Troubleshooting

1

Thank you for selecting a Legacy Loudspeaker System. These
hand-crafted instruments will provide you with many years of
listening enjoyment. Please take a few moments to read this brief
manual to insure maximum benefit from your speaker system.

Limited Warranty

Legacy Audio, Inc. extends to the original owner coverage of
defects in materials and workmanship for a period of 90 days
from the date of purchase. To extend this warranty to 10 years,
please fill out the enclosed warranty card and return to Legacy
Audio.

This warranty does not include a) damage in shipment, b)
damage caused by accidental or intentional misuse or abuse, c)
units not registered with Legacy Audio, d) damage resulting from
unauthorized modifications or repairs. Liability is limited to the
repair or replacement, at our option, of any defective component
and shall not include property or consequential damages which
may result from the failure of this product.

Customer Record

Model No. ____________________________

Serial No. _____________________________

Date of Purchase ____ / ____ / ____

Owner _______________________________

Street Address _________________________

City ______________ State _____ Zip _____

2

Unpacking

Your new speaker system has been very carefully packaged to
insure that it travels to you safely. Each speaker is protected by a
double-wall outer carton with heavy V-board corner protectors.
Molded foam end caps are used to protect the elegant cabinetry,
and a plastic liner is provided as waterproofing.

Please save this packing for future transportation. If cartons
become damaged or misplaced, new ones can be purchased from
Legacy Audio.

Connections

At the top end of your Skyline you will find a terminal plate
housing one pair of five-way binding posts.

Connect the output of the rear channel amplifier to the
loudspeaker via the gold five-way binding posts provided. Dual
banana plugs or gold spade lugs are recommended means of
termination.

Be sure that you observe polarity when making the
connections. The positive (+) terminal (red) of the amplifier
should be connected to the positive terminal of the loudspeaker.
The negative (-) terminal (black) of the amplifier should be
connected to the negative terminal of the loudspeaker.