![](/html/5c/5c27/5c2778c09e4baaa3e6024ff9b8fa4510ad02443554ada2604ea13e02977275b0/bg2.png)
Table of Contents
Registration
Page
Owners Record 3
The Cabinetry / Our Commitment 4
Warranty 5
Setup
Unpacking Your Speakers 6
Speaker Installation 7-17
Hooking Up Cables 18-20
Amplification 21-23
Technology
Designer’s Notes 24
Specifications 25
2
![](/html/5c/5c27/5c2778c09e4baaa3e6024ff9b8fa4510ad02443554ada2604ea13e02977275b0/bg3.png)
Owners Record
The serial number is located on the rear of the unit. Record this
number in the space provided below. Refer to this when calling your
dealer regarding this product.
Model: Harmony HD
Serial No: _________________________
Date of purchase: ___________________
Thank you for selecting a Legacy Loudspeaker System. These handcrafted instruments will provide you with many years of listening enjoyment.
3
![](/html/5c/5c27/5c2778c09e4baaa3e6024ff9b8fa4510ad02443554ada2604ea13e02977275b0/bg4.png)
The Cabinetry / Our Commitment
Handcrafted
Beneath the surface of Harmony HD’s elegant exterior lies rigid MDF
construction. Interlocking joinery maximizes the strength of the cabinet
parts. Polyester fiberfill is selected for internal damping. A sharp rap on
the enclosure will leave you with little more than bruised knuckles.
Each cabinet is impeccably finished on all exposed surfaces with select
veneers. The exquisite finish is hand-rubbed several times to assure a
patina at home with the most elegant decor.
Our Commitment
A great deal of forethought, love and satisfaction is instilled in each piece
of Legacy workmanship. We take pride in getting to know many of our
customers on a first name basis.
Your purchase of this product is backed by the renowned “Legacy
Satisfaction Guarantee”.
4
![](/html/5c/5c27/5c2778c09e4baaa3e6024ff9b8fa4510ad02443554ada2604ea13e02977275b0/bg5.png)
Warranty
Legacy Audio supports its customers and products with pride. We cheerfully warrant our loudspeaker products we manufacture from defects in materials and workmanship for a period of seven
(7) years. Electronic components such as internal amplifiers and digital processors are covered for
three (3)years. Please register your product with Legacy Audio. Should you require service Legacy
will require a proof of purchase in order to honor the warranty - so please keep your receipt.
• The warranty applies to the original owner and is not transferable.
• The warranty applies to products purchased from an “Authorized Legacy Dealer”.
• The warranty on active components such as digital processors or internal amplifiers is limited to three
(3) years of coverage.
• The warranty on dealer stock will extend for a maximum of two years from invoice.
The warranty does not cover transportation costs of product to or from the customer, distributor or
dealer, or related shipping damage.
Exclusions from Warranty
The following situations or conditions are not covered by the Legacy Audio warranty:
• Accidental damage, electrical abuse or associated equipment failure.
• Use inconsistent with recommended operating instructions and specifications
• Damage caused by modification or unauthorized service
• Costs associated with the removal and reinstallation of defective products. Consequential damage to
other products.
• Normal wear such as fading of finishes due to sunlight.
5
![](/html/5c/5c27/5c2778c09e4baaa3e6024ff9b8fa4510ad02443554ada2604ea13e02977275b0/bg6.png)
Unpacking Your Speakers
Your new speaker system has been very carefully packaged to insure
that it travels to you safely. Each speaker is protected by a doublewall outer carton with heavy V-board corner protectors. Molded foam
end caps are used to protect the elegant cabinetry, and a plastic liner
is provided as waterproofing. Please save this packing for future
transportation. If cartons become damaged or misplaced, new ones
can be purchased from Legacy Audio.
6
![](/html/5c/5c27/5c2778c09e4baaa3e6024ff9b8fa4510ad02443554ada2604ea13e02977275b0/bg7.png)
Speaker Installation
Precautions
If you have any doubts about your ability to properly install in-wall loudspeakers, you should consider the services of a custom installer. If you plan to install
them yourself, always use high quality tools to save time and make the installation go more smoothly. The Harmony In-Wall Loudspeakers mount into standard 4-inch (or greater) stud depth walls. Determine the final location of both
left and right speakers before cutting any holes since changes to one speaker
may affect the other either aesthetically or acoustically. Look for pipes, wiring
or any other conflicting material that might be damaged before beginning the
installation.
WARNING: Wear Eye Protection when cutting drywall. Also be certain there
are no electrical, water, heating, or gas lines inside the wall in the location you
plan to mount your Harmony loudspeakers.
7
![](/html/5c/5c27/5c2778c09e4baaa3e6024ff9b8fa4510ad02443554ada2604ea13e02977275b0/bg8.png)
Speaker Installation
Installing the Harmony In-Wall Loudspeakers
Packing List
Harmony Speaker
Installation Manual
(2) Support Blocks
(4) Support Block Screws
(2) Tensioning Screws
Tools Required
Pencil
Drywall Saw
Level
Phillips Screwdriver
Tape Measure
Mallet
8
![](/html/5c/5c27/5c2778c09e4baaa3e6024ff9b8fa4510ad02443554ada2604ea13e02977275b0/bg9.png)
Speaker Installation
Due to Harmony’s unique patented design, Installation is identical for new or existing
construction. The Harmony speaker is designed to perform at its best when the bottom of the speaker is located well off the floor (about 2.5 feet). While it may be installed at greater heights, it will perform most optimally if the variance is kept within
6” of this height. When wiring, it is useful to leave several extra feet of speaker cable
at the speaker end.
Select the wall locations for the
Harmony system. Try to create a
60-degree angle horizontally between the speaker pair, relative
to the listening position. A spac-
9
ing of 8 feet between speakers is
achievable in rooms 12 to 15 feet
in width. (Figure 1) Spacing may
be affected by the use of a video
monitor or screen. To facilitate
installation, Legacy has designed
the Harmony Center to be located either above or below a
thin profile wall monitor.