Legacy Focus SE Owner's Manual

Owners Manual For The

FOCUS SE

Loudspeaker System

2

Registration
Owners Record 3
The Cabinetry / Our Commitment 4
Warranty 5

Setup
Unpacking Your Speakers 6
Speaker Installation 7
Hooking Up Cables 8-9
Amplification 10-12
Foot Installation 13-16
Speaker Connections 17-21
Fine Tuning 22

Technology
Specifications 23

Table of Contents

Page

3

The serial number is located on the rear of the unit. Record this
number in the space provided below. Refer to this when calling your
dealer regarding this product.

Model: FOCUS SE
Serial No: _________________________
Date of purchase: ___________________

Thank you for selecting a Legacy Loudspeaker System. These hand­crafted instruments will provide you with many years of listening en­joyment.

Owners Record

4

Handcrafted

Beneath the surface of FOCUS SE’s elegant exterior lies rigid MDF
construction. Interlocking joinery maximizes the strength of the cabinet
parts. Polyester fiberfill is selected for internal damping. A sharp rap on
the enclosure will leave you with little more than bruised knuckles.

Each cabinet is impeccably finished on all exposed surfaces with select
veneers. The exquisite finish is hand-rubbed several times to assure a
patina at home with the most elegant decor.

Our Commitment

A great deal of forethought, love and satisfaction is instilled in each piece
of Legacy workmanship. We take pride in getting to know many of our
customers on a first name basis.

Your purchase of this product is backed by the renowned “Legacy
Satisfaction Guarantee”.

The Cabinetry / Our Commitment

5

Legacy Audio supports its customers and products with pride. We cheerfully warrant our loud­speaker products we manufacture from defects in materials and workmanship for a period of seven
(7) years. Electronic components such as internal amplifiers and digital processors are covered for
three (3)years. Please register your product with Legacy Audio. Should you require service Legacy
will require a proof of purchase in order to honor the warranty - so please keep your receipt.

• The warranty applies to the original owner and is not transferable.

• The warranty applies to products purchased from an “Authorized Legacy Dealer”.

• The warranty on active components such as digital processors or internal amplifiers is limited to three

(3) years of coverage.

• The warranty on dealer stock will extend for a maximum of two years from invoice.

The warranty does not cover transportation costs of product to or from the customer, distributor or
dealer, or related shipping damage.

Exclusions from Warranty

The following situations or conditions are not covered by the Legacy Audio warranty:

• Accidental damage, electrical abuse or associated equipment failure.

• Use inconsistent with recommended operating instructions and specifications

• Damage caused by modification or unauthorized service

• Costs associated with the removal and reinstallation of defective products. Consequential damage to

other products.

• Normal wear such as fading of finishes due to sunlight.

Warranty

6

Your new speaker system has been very carefully packaged to insure
that it travels to you safely. Each speaker is protected by a double­wall outer carton with heavy V-board corner protectors. Molded foam
end caps are used to protect the elegant cabinetry, and a plastic liner
is provided as waterproofing. Please save this packing for future
transportation. If cartons become damaged or misplaced, new ones
can be purchased from Legacy Audio.

Unpacking Your Speakers

7

To allow more flexibility in seating arrangements, your Legacy loudspeaker is
designed for broad lateral coverage. Optimal listener position is actually
about 5 to 15 degrees off the axis normal to the loudspeaker baffle. Assum­ing a listener distance of about ten feet, begin by placing the speakers ap­proximately 7 feet apart and about 1 – 3 feet from the wall behind them. In
most rooms this will afford a speaker position at least 2 feet or more from
the side walls. The amount of recommended "toe-in" is a function of the lis­tening angle. As the overall listening angle increases from 40 degrees, the
amount of toe-in should increase. Your Legacy speaker is optimized for a flat
response in the far field. Best results are obtained vertically with the lis­tener's ear at tweeter level with the loudspeakers gently toed in toward the
listener. Increasing the degree of toe-in is recommended when placement
next to sidewalls is required. Placing the loudspeaker or the listener near a
room boundary will generally increase low frequency impact. If you are
forced to position one or both of your loudspeakers in a corner, be prepared
to reduce bass output via the control switches on the rear terminal plate of
each loudspeaker. You may also wish to reduce low frequency output with
your preamp's bass tone control.

Speaker Placement

8

The ideal conductor would have negligible resistance, inductance
and capacitance. The table below shows how a few actual speaker
cables measure up.

Cable Ωs/ft pF/ft µH/ft
12 ga. 0.0033 24 0.21
14 ga. 0.0048 17 0.13
16 ga. 0.0079 16 0.18
18 ga. 0.0128 28 0.21

Capacitance is considered insignificant in each cable because its ef­fect is well out of the audio bandwidth; inductance can be de­creased (at the expense of increased capacitance) by keeping the
conductor pair closely spaced.

How long would a cable have to be before inductance effects would
impinge on the audio spectrum? Approximately 300 feet of 12 gauge
would be required to establish a corner frequency of 20 kHz with an
8 Ohm loudspeaker. As you see, inductance is not a problem for
most of us.

Hooking Up Cables