Leeson LM32755 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: LM32755

Catalog No: LM32755

75 HP General Purpose Motor, 3 phase, 1800 RPM, 230/460 V, 365TS Frame, ODP

Three Phase ODP Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2019 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: LM32755, Catalog No:LM32755 75 HP General Purpose Motor, 3 phase, 1800 RPM, 230/460 V, 365TS Frame,
ODP

Nameplate Specifications

Output HP 75 Hp Output KW 56.0 kW
Frequency 60 Hz Voltage 230/460 V
Current 180.0/90.0 A Speed 1782 rpm
Service Factor 1.25 Phase 3
Efficiency 95 % Power Factor 81.5
Duty Continuous Insulation Class F
Design Code B KVA Code G
Frame 365TS Enclosure Drip Proof
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 313 Opp Drive End Bearing Size 311
UL Recognized CSA Y
CE Y IP Code 22

Technical Specifications

Electrical Type Squirrel Cage Induction Run Starting Method Wye Start Delta Run
Poles 4 Rotation Reversible
Resistance Main .065 Ohms Mounting Rigid base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type TS Overall Length 29.45 in
Frame Length 16.48 in Shaft Diameter 1.875 in
Shaft Extension 3.75 in Assembly/Box Mounting F1 Only

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATI ON - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHE R FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTI TY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANG LE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

XH2D1SS2

NJS

09-17-2001

HNH

09-18-2001

C T. WOLLER 2/26/2019

ECO-0163030 C. OHRMUNDT 3/14/2019

SWITCHED FRAME TO CORRECT DESIGN

OUTLINE

360TS FR. ODP UE

NOTES:

1. NAMEPLATES TO BE READ FROM CONDUIT BOX
SIDE OF MOTOR.

DASH FRAME B C 2F 2FF BS

1548 364TS

14.61

[371.09]

26.28

[667.51]

11.25

[285.75]

11.07

[281.18]

1648 365TS

15.61

[396.49]

27.28

[692.94]

12.25

[311.15]

11.25

[285.75]

12.07

[306.58]

C

B

3.75

95.25

4.21

106.95

9.25

234.95

1.875

1.874

47.625

47.600

5.88

149.24

2F

2FF

2FF

BS

.50 x .50 x 2.00
[12.70 x 12.70 x 50.80]
KEY

16.20

411.48

3.14

79.76

17.32

439.88

20.78

527.79

25.46

646.71

14.00

355.60

7.00

177.80

4.17

105.92

9.00

8.94

228.60

227.08

.47

11.94

12.93

328.48

16.80

426.77

.68 [17.27] DRILL THRU

364 - 4 HOLES
365 - 8 HOLES

3.62 [91.95]

LEAD HOLE

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATI ON - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHE R FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTI TY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANG LE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

XH2D1SS2

NJS

09-17-2001

HNH

09-18-2001

C T. WOLLER 2/26/2019

ECO-0163030 C. OHRMUNDT 3/14/2019

SWITCHED FRAME TO CORRECT DESIGN

OUTLINE

360TS FR. ODP UE

NOTES:

1. NAMEPLATES TO BE READ FROM CONDUIT BOX
SIDE OF MOTOR.

DASH FRAME B C 2F 2FF BS

1548 364TS

14.61

[371.09]

26.28

[667.51]

11.25

[285.75]

11.07

[281.18]

1648 365TS

15.61

[396.49]

27.28

[692.94]

12.25

[311.15]

11.25

[285.75]

12.07

[306.58]

Uncontrolled Copy

3 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 7