Leeson E116770.00 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: E116770.00

Catalog No: E116770.00

1.50 HP General Purpose Motor, 1 phase, 3600 RPM, 115/230 V, 56C Frame, ODP Single Phase ODP Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 6

Product Information Packet: Model No: E116770.00, Catalog No:E116770.00 1.50 HP General Purpose Motor, 1 phase, 3600 RPM, 115/230 V, 56C Frame, ODP

Nameplate Specifications

Output HP 1.50 Hp Output KW 1.1 kW Frequency 60 Hz Voltage 115/230 V Current 12.2/6.1 A Speed 3450 rpm Service Factor 1.15 Phase 1 Efficiency 81.5 % Power Factor 97.3 Duty Continuous Insulation Class F Design Code L KVA Code J Frame 56C Enclosure Drip Proof Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203 UL Recognized CSA Y CE Y IP Code 22

Technical Specifications

Electrical Type Capacitor Start Capacitor Run Starting Method Across The Line Poles 2 Rotation Selective Counterclockwise Resistance Main 0 Ohms Mounting Rigid base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type NEMA 56 Overall Length 11.87 in Frame Length 7.00 in Shaft Diameter 0.625 in Shaft Extension 1.88 in Assembly/Box Mounting F1 ONLY Outline Drawing 607-0353-700C Connection Drawing 005054.01

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:14/10/2020

2 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 6

Regal Beloit America, Inc.

TM

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 0.5 .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

125 3.2

INCH mm mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

607-0353

A. KEETHA 02/09/2018

PK

05/23/2018

A

ECO-0136357

OUTLINE CONVERSION PROJECT

OUTLINE

607-0202

DRIP PROOF-RIGID 56C FRAME

DASH

NO.

"C" "AD"

700 11.87[301.49] 6.38[162.05]

CAP.

DASH

"XO"

A 1.15[29.21] B 1.49[37.84] C 1.72[[43.68]

.12

3.05

3.00

76.20

3.75

95.25

.34

8.64

4.500

4.497

114.300

114.224

6.52

165.70

"C" .06

[1.52]

2.06

52.34

1.94

49.29

1.875

47.625

.07

1.67

1.41

35.81

FULL

DEPTH

"AD"

.6250 .6245

15.8750

15.8623

2.74

69.66

.19[4.82] SQ. X 1.38[35.05]

KEY

1/2-14 NPT (PLIGGED)

.004 H

.002 G

H

G

6.50

165.10

4.88

123.95

2.44

61.98

1.22

30.99

.119

3.023

28° 28°

3.50

3.48

88.90

88.39

6.75

171.51

45° 45°

"XO"

(4) 3/8-16 UNC 2B X .56[14.22] DEEP ON Ø5.875[149.22]

Regal Beloit America, Inc.

TM

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 0.5 .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

125 3.2

INCH mm mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

607-0353

A. KEETHA 02/09/2018

PK

05/23/2018

A

ECO-0136357

OUTLINE CONVERSION PROJECT

OUTLINE

607-0202

DRIP PROOF-RIGID 56C FRAME

DASH

NO.

"C" "AD"

700 11.87[301.49] 6.38[162.05]

CAP.

DASH

"XO"

A 1.15[29.21] B 1.49[37.84] C 1.72[[43.68]

Uncontrolled Copy

3 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 6

6/28/2007 5:18:38 PM -

4 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 6

dp?sg_,2333H@Qu@GCGuQ@@v qdp_?g_b2333KD3Lwxy

]d__a/.g-b+-q2333

 3



?^,+qdo?-?o *+d?,]?d+o f .b/+?. 0+b/+?.

wLwN wL wLwN wLwN wLwN KIx:N

3

HA@G HA@G

Ixx Ixx

., d.,

0,-+g_bo

~LxyMN3NJ :Iw4IM43CH wLwN wLwN DDtt3:MN::~MLLK3vuAAG MLxxN43:NNx

b+,-o, o^-c?/?1*, o*,]g-s/., o*,]g-s/d.,

?^,+qdl*+d?,]?d+o

.,/0+-]},?

vuKIvN :Iw4IM4 M4 LMLwIx KIx:N wLwN KIx:N wLwN MNNw3u3xNN:Lw3I:IONM

?1*,

/

d.,/0+-]},?

?1*,

/

qdp_?

?1*,

/

d+g,_?-?gd_

odp_./*+,oop+,

GHPAC3333s0lc? {Q3B3tGPC D@HPCD3333s0lc?333AEt3 {GPtC3333s0lc?333AG@3 AAPH

@33330- D@33330- @P@tQ3333s0lc?i @3333s0lc?i @3333o,]a s0oa

/h/c?a

/

odp_./*df,+ +d?d+/f}i q-a/f}i o-c,/o?-ss/?gq,

casa/?d+p, sd]},./+d?d+/-q*o sa+a/?d+p, 0a.a/?d+p, casa/+go,]

cpss/sd-./,cc233333{DPC hj/sd-./,cc233333{DPC Zi/sd-./,cc233333QQPQ

cpss/sd-./*c233333EQPG hj/sd-./*c233333EQPH Zi/sd-./*c233333EQPC Q{PC vI~3:IM3vI~3Mw

*^ ^ `ds?o -q*o o?-+?/?1*, .p?1 g_os oaca -q0]

D H@ DDCBAG@ DAPABHPD IvML::3N3xwN vLwwL: Kt DPDC t@

D3DBA DPDA GH@@ GtC@ CHv 4~  x

_ 3

d 3

? 3

, 3

o 3

fg_.g_b/r2333zHGAD{C334M33333G3I

^* |f o1_]a/+*q casa/+*q c+-q, ,_]sdop+, }`-/]d., .,ogb_

@@C@CtP@D

/op**s,q,_?-s/g_cd+q-?gd_/

?1*g]-s/qd?d+/*,+cd+q-_],/.-?-

],+?gcg]-?gd_/.-?-/o^,,?

o,`,+,

.p?1

/

^--+.dpo

sd]-?gd_

g_`a/^*/o*,,./+-_b,2333wLwN

,_]d.,+2333wLwN 3

wLwN 333333333wLwN 3

wLwN 333333333wLwN 3~~M

0+-},2333wLwN 33333wLwN 3

wLwN 3333333~Bw3wLwN 3

wLwN 3333333wLwN 3

wLwN 3Kux33333wLwN 3O33333wLwN 3

g_`,+?,+/?d+p,2333wLwN 3

/

?^,+qgo?d+o ]d_?+ds o*-],/^,-?,+o

q-?,+g-s

o^-c?

/

wLwN33`ds?o

]d`,+

.+g*

/

o]+,,_o *-g_?

b?.a/,cc ,s,]a/?1*,

o?-+?o/

^dp+

0 36

/

]-?-sdb/r233

E116770.00

*^a/ikilhmmlnnZ[

b+-c?d_e/fg/\h[ij

Uncontrolled Copy

Z[\Z/]^,1,__,/-`,a

q-?,+g-s

c+-q,

/

qd?d+/fb?

-**+da

/

5 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 6

HZ

3/26/2018

3540

Uncontrolled Copy

LEESON ELECTRIC CORPORATION

TYPICAL PERFORMANCE CURVE for AC MOTOR

Curve at 230 Volts HP 1.50

60 HZ

Model No E116770.00 1.5 HP VOLTS 115/230

1

Catalog No E116770.00

60 70 80 90 100

EFF

60 70 80 90 100

PF

1.2 1.4 1.6 1.8 2

HP

60 RPM 3450

Eff −

−

−−

PF −

−

−−

HP −

−

−−

RPM −

−

−−

KW −

−

−−

Amps −

−

−−

3560 3580 3600 3620

1.2 1.4 1.6 1.8 2

RPM

KW

3560 3580 3600 36201.2 1.4 1.6 1.8 26 7 8 9 10

60 70 80 90 10060 70 80 90 1001.2 1.4 1.6 1.8 2

PF

HP

KW

EFF

RPM

AMPS

0 10 20 30 40 50

0 0.5 1 1.5 2 2.5 3 3.5

FL TORQUE 2.266 Lb.Ft FL AMPS 12.2/6.1 BD TORQUE 5.2 Lb.Ft PU TORQUE 5.1 Lb.Ft LR TORQUE 6.657 Lb.Ft LR AMPS 43.48 WINDING K632185-3 Date

0 0.2 0.4 0.6 0.8 1

0 0.5 1 1.5 2 2.5 3 3.5

0 0.2 0.4 0.6 0.8 1

3420 3440 3460 3480 3500 3520

0 0.5 1 1.5 2 2.5 3 3.5

Torque

0 10 20 30 40 50

0 0.2 0.4 0.6 0.8 1

0 1 2 3 4 5

3420 3440 3460 3480 3500 3520

0 0.5 1 1.5 2 2.5 3 3.5

Torque

Torque in Lb.Ft

6 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 6