Leeson E101449.00 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: E101449.00

Catalog No: E101449.00

0.75 HP General Purpose Motor, 3 phase, 3600 RPM, 230/460 V, 56 Frame, ODP
Three Phase ODP Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2020 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 5

Product Information Packet: Model No: E101449.00, Catalog No:E101449.00 0.75 HP General Purpose Motor, 3 phase, 3600 RPM, 230/460 V, 56
Frame, ODP

Nameplate Specifications

Output HP 0.75 Hp Output KW 0.56 kW
Frequency 60 Hz Voltage 230/460 V
Current 2.4/1.2 A Speed 3450 rpm
Service Factor 1.25 Phase 3
Efficiency 76.8 % Power Factor 74
Duty Continuous Insulation Class F
Design Code NO DESIGN CODE KVA Code K
Frame S56 Enclosure Drip Proof
Thermal Protection Thermostats (N/C) Ambient Temperature 40 °C
Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE Y IP Code 22

Technical Specifications

Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter
Poles 2 Rotation Reversible
Resistance Main 6.85 Ohms Mounting Rigid base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type NEMA 56 Overall Length 9.74 in
Frame Length 5.75 in Shaft Diameter 0.625 in
Shaft Extension 1.88 in Assembly/Box Mounting F1 ONLY
Connection Drawing 005010.20 Outline Drawing 032123-575

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:14/10/2020

2 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 5

Uncontrolled Copy

3 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 5

VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.

VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.

TSTAT(S)

TSTAT(S)

Uncontrolled Copy

T1

T1
T2

T2

T3

T3
T4

T4
T5

T5
T6

T6
T7

T7
T8

T8

T9

T9
RED(P1)

RED(P1)

RED(P2)

RED(P2)

T9

T9

T3

T3

LINE LEADS

LINE LEADS

T1

T1

T7

T7

T4

T4

T5

T5

T6

T6

T8

T8

T2

T2

DATE

REVISION BY

DRAWING REVISION

DRAWING REVISION

ECO

ECO

ECO DESCRIPTION

ECO DESCRIPTION

G

G

ECO-0121253

ECO-0121253

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,

BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED

BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT

TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

REVISION BY

APPROVED BY

APPROVED BY

ADDED P1 & P2 FOR TSTAT

ADDED P1 & P2 FOR TSTAT

MVG

MVG

SM

SM

DATE

04/05/2017

04/05/2017

DATE

DATE

04/05/2017

04/05/2017

TOLERANCES UNLESS

TOLERANCES UNLESS
OTHERWISE SPECIFIED:

OTHERWISE SPECIFIED:
DEC.

DEC.

INCH mm ANGLE

INCH mm ANGLE

.X 0.1 [ 2.5] 0.5

.X 0.1 [ 2.5] 0.5
.XX 0.01 [ 0.25]

.XX 0.01 [ 0.25]
.XXX 0.005 [ 0.127]

.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]

.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP

REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45

EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]

CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

MACHINED SURFACES:
INCH mm

INCH mm
mm SHOWN IN [BRACKETS]

mm SHOWN IN [BRACKETS]

125 3.2

125 3.2

DRAWN BY

DRAWN BY

DBT 12/16/97

DBT 12/16/97

DATE

DATE

APPROVED BY

APPROVED BY

KH 12/17/97

KH 12/17/97

DATE

DATE

REFERENCE

REFERENCE

THIRD ANGLE

THIRD ANGLE
PROJECTION

PROJECTION

VOLTAGE L1 L2 L3 JOIN & INSULATE

VOLTAGE L1 L2 L3 JOIN & INSULATE

(T4,T7)

(T4,T7)

HIGH T1 T2 T3

HIGH T1 T2 T3

LOW T1,T7 T2,T8 T3,T9 T4,T5,T6

LOW T1,T7 T2,T8 T3,T9 T4,T5,T6

TM

TM

Regal Beloit America, Inc.

Regal Beloit America, Inc.

DESCRIPTION

DESCRIPTION

CONN DIAGRAM-EXTERNAL

CONN DIAGRAM-EXTERNAL

3 PHASE WITH PROTECTOR

3 PHASE WITH PROTECTOR

MATERIAL

MATERIAL

DECAL - 004014 (TSTAT) - 080582

DECAL - 004014 (TSTAT) - 080582

SIZE DRAWING NUMBER

SIZE DRAWING NUMBER

00501020

A

A

00501020

PROCESS/FINISH

PROCESS/FINISH

(T5,T8)

(T5,T8)
(T6,T9)

(T6,T9)

STOCK

STOCK

SHEET

SHEET

1 OF 1

1 OF 1

4 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 5

Curve at

Volts

HP

HZ

Model No

HP

VOLTS

Catalog No

E101449.00

HZ

60&50

RPM

3450&2850

Torque in Oz.Ft

FL TORQUE

Oz.Ft

FL AMPS

BD TORQUE

Oz.Ft

PU TORQUE

Oz.Ft

LR TORQUE

53.6

Oz.Ft

LR AMPS

8.54

WINDING

T5527-3

Date

5/22/2018

Uncontrolled Copy

LEESON ELECTRIC CORPORATION

TYPICAL PERFORMANCE CURVE for AC MOTOR

460

60

E101449.00 0.75

0.75&0.75

230/460&230/460

Eff −

−

−−

PF −

−

−−

HP −

−

−−

RPM −

−

−−

KW −

−

−−

Amps −

−

−−

3

60 70 80 90 100

EFF

0 10 20 30 40 50

60 70 80 90 100

PF

0 10 20 30 40 50

0 5 10 15 20 25

0.6 0.7 0.8 0.9 1

HP

RPM

0 0.1 0.2 0.3 0.4 0.5

0 5 10 15 20 25

0 5 10 15 20 25

18

73.3

0.6 0.7 0.8 0.9 1

3580 3600 3620 3640 3660

KW

0 0.1 0.2 0.3 0.4 0.5

3460 3480 3500 3520 3540 3560

0 5 10 15 20 25

Torque

60 70 80 90 10060 70 80 90 1000.6 0.7 0.8 0.9 13580 3600 3620 3640 36600.6 0.7 0.8 0.9 11.2 1.4 1.6 1.8 2

PF

HP

KW

EFF

RPM

AMPS

0 10 20 30 40 50

0 10 20 30 40 50

0 0.1 0.2 0.3 0.4 0.5

0 0.1 0.2 0.3 0.4 0.5

0 0.2 0.4 0.6 0.8 1

3460 3480 3500 3520 3540 3560

0 5 10 15 20 25

0 5 10 15 20 25

0 5 10 15 20 25

0 5 10 15 20 25

0 5 10 15 20 25

0 5 10 15 20 25

0 5 10 15 20 25

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

2.4/1.2

48.0

5 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 5