PRODUCT INFORMATION PACKET
Model No: 825403.00
Catalog No: 825403.00
3 HP General Purpose Motor, 3 phase, 900 RPM, 230/460 V, 215T Frame, TEFC
Three Phase TEFC Motors
Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.
©2019 Regal Beloit Corporation, All Rights Reserved. MC017097E
1 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 4
Product Information Packet: Model No: 825403.00, Catalog No:825403.00 3 HP General Purpose Motor, 3 phase, 900 RPM, 230/460 V, 215T Frame,
TEFC
Nameplate Specifications
Output HP 3 Hp Output KW 2.2 kW
Frequency 60 Hz Voltage 230/460 V
Current 10.0/5.0 A Speed 875 rpm
Service Factor 1.15 Phase 3
Efficiency 86.5 % Power Factor 66.5
Duty Continuous Insulation Class F
Design Code B KVA Code H
Frame 215T Enclosure Totally Enclosed Fan Cooled
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6307 Opp Drive End Bearing Size 6208
UL Recognized CSA Y
CE Y IP Code 43
Technical Specifications
Electrical Type Squirrel Cage Induction Run Starting Method Across The Line
Poles 8 Rotation Reversible
Resistance Main 3.5 Ohms Mounting Rigid Base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Cast Iron
Shaft Type T Overall Length 19.63 in
Frame Length 9.12 in Shaft Diameter 1.375 in
Shaft Extension 3.38 in Assembly/Box Mounting F1/F2 CAPABLE
This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019
2 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 4
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.XX 0.03 [ 0.76]
XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
125 3.2
INCH mm
mm SHOWN IN [BRACKETS]
1
2
4
3
A
B
2
4
3
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
037659
AK
10-05-2009
SK
10-05-2009
D M. VERBICK 5-29-2015
ECO-0078542
TITLE BLOCK LOGO CHANGE
OUTLINE
210 FR. TEFC
NOTES:
CONDUIT BOX CAN BE ROTATED IN 90 STEPS.1.
CONDUIT BOX CAN BE MOUNTED IN OPPOSITE SIDE BY REMOVING 2.
BRACKETS AND TURNING FRAME 180 .
NAMEPLATE TO BE READ FROM CONDUIT BOX SIDE OF MOTOR.3.
1212 213/215
22.63
[574.80]
11.76
[298.70]
10.00
[254.00]
7.00
[177.80]
5.00
[127.00]
912 213/215
19.63
[498.60]
8.63
[219.20]
7.00
[177.80]
5.50
[139.70]
3.50
[88.90]
DASH FRAME C B 2F 2FF BS
8.50
215.90
9.88
250.95
1.56
39.62
.62
15.62
5.25
5.19
133.22
131.70
2.12
53.85
7.79
197.74
9.44
239.70
4.25
107.95
11.77
299.04
12.83
325.76
15.29
388.29
.40
8 HOLES
1.09
LEAD HOLE
1.74
44.07
3.38
85.73
3.48
88.38
1.3750
1.3745
34.9250
34.9123
3.50
88.89
BS
B
2F
2FF
2FF
C
5.00
127.00
TERM.
END
.31x.31x2.38
KEY
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.XX 0.03 [ 0.76]
XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
125 3.2
INCH mm
mm SHOWN IN [BRACKETS]
1
2
4
3
A
B
2
4
3
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
037659
AK
10-05-2009
SK
10-05-2009
D M. VERBICK 5-29-2015
ECO-0078542
TITLE BLOCK LOGO CHANGE
OUTLINE
210 FR. TEFC
NOTES:
CONDUIT BOX CAN BE ROTATED IN 90 STEPS.1.
CONDUIT BOX CAN BE MOUNTED IN OPPOSITE SIDE BY REMOVING 2.
BRACKETS AND TURNING FRAME 180 .
NAMEPLATE TO BE READ FROM CONDUIT BOX SIDE OF MOTOR.3.
1212 213/215
22.63
[574.80]
11.76
[298.70]
10.00
[254.00]
7.00
[177.80]
5.00
[127.00]
912 213/215
19.63
[498.60]
8.63
[219.20]
7.00
[177.80]
5.50
[139.70]
3.50
[88.90]
DASH FRAME C B 2F 2FF BS
Uncontrolled Copy
3 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 4
Uncontrolled Copy
4 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 4
Loading...