PRODUCT INFORMATION PACKET
Model No: 171848.60
Catalog No: 171848.60
10 HP Grain Stirring Motor, 3 phase, 1800 RPM, 208-230/460 V, 215TZ Frame, TEFC
Grain Stirring Motors
Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.
©2019 Regal Beloit Corporation, All Rights Reserved. MC017097E
1 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 4
Product Information Packet: Model No: 171848.60, Catalog No:171848.60 10 HP Grain Stirring Motor, 3 phase, 1800 RPM, 208-230/460 V, 215TZ
Frame, TEFC
Nameplate Specifications
Output HP 10 Hp Output KW 7.5 kW
Frequency 60 Hz Voltage 208-230/460 V
Current 27.0-25.0/12.5 A Speed 1760 rpm
Service Factor 1.15 Phase 3
Efficiency 91.7 % Power Factor 81.6
Duty Continuous Insulation Class F
Design Code B KVA Code H
Frame 215TZ Enclosure Totally Enclosed Fan Cooled
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6308 Opp Drive End Bearing Size 6306
UL Recognized CSA Y
CE Y IP Code 55
Technical Specifications
Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter
Poles 4 Rotation Reversible
Resistance Main .216 Ohms Mounting Rigid base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Cast Iron
Shaft Type Single Special Extension Overall Length 20.78 in
Shaft Diameter 1.375 in Shaft Extension 4.38 in
Assembly/Box Mounting F1/F2 CAPABLE
This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019
2 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 4
Uncontrolled Copy
3 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 4
VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.
VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.
TSTAT(S)
TSTAT(S)
Uncontrolled Copy
T1
T1
T2
T2
T3
T3
T4
T4
T5
T5
T6
T6
T7
T7
T8
T8
T9
T9
RED(P1)
RED(P1)
RED(P2)
RED(P2)
T9
T9
T3
T3
LINE LEADS
LINE LEADS
T1
T1
T7
T7
T4
T4
T5
T5
T6
T6
T8
T8
T2
T2
DATE
REVISION BY
DRAWING REVISION
DRAWING REVISION
ECO
ECO
ECO DESCRIPTION
ECO DESCRIPTION
G
G
ECO-0121253
ECO-0121253
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
REVISION BY
APPROVED BY
APPROVED BY
ADDED P1 & P2 FOR TSTAT
ADDED P1 & P2 FOR TSTAT
MVG
MVG
SM
SM
DATE
04/05/2017
04/05/2017
DATE
DATE
04/05/2017
04/05/2017
TOLERANCES UNLESS
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
OTHERWISE SPECIFIED:
DEC.
DEC.
INCH mm ANGLE
INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.X 0.1 [ 2.5] 0.5
.XX 0.01 [ 0.25]
.XX 0.01 [ 0.25]
.XXX 0.005 [ 0.127]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
MACHINED SURFACES:
INCH mm
INCH mm
mm SHOWN IN [BRACKETS]
mm SHOWN IN [BRACKETS]
125 3.2
125 3.2
DRAWN BY
DRAWN BY
DBT 12/16/97
DBT 12/16/97
DATE
DATE
APPROVED BY
APPROVED BY
KH 12/17/97
KH 12/17/97
DATE
DATE
REFERENCE
REFERENCE
THIRD ANGLE
THIRD ANGLE
PROJECTION
PROJECTION
VOLTAGE L1 L2 L3 JOIN & INSULATE
VOLTAGE L1 L2 L3 JOIN & INSULATE
(T4,T7)
(T4,T7)
HIGH T1 T2 T3
HIGH T1 T2 T3
LOW T1,T7 T2,T8 T3,T9 T4,T5,T6
LOW T1,T7 T2,T8 T3,T9 T4,T5,T6
TM
TM
Regal Beloit America, Inc.
Regal Beloit America, Inc.
DESCRIPTION
DESCRIPTION
CONN DIAGRAM-EXTERNAL
CONN DIAGRAM-EXTERNAL
3 PHASE WITH PROTECTOR
3 PHASE WITH PROTECTOR
MATERIAL
MATERIAL
DECAL - 004014 (TSTAT) - 080582
DECAL - 004014 (TSTAT) - 080582
SIZE DRAWING NUMBER
SIZE DRAWING NUMBER
00501020
A
A
00501020
PROCESS/FINISH
PROCESS/FINISH
(T5,T8)
(T5,T8)
(T6,T9)
(T6,T9)
STOCK
STOCK
SHEET
SHEET
1 OF 1
1 OF 1
4 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 4
Loading...