Leeson 132595.00 Product Information Packet

Download

PRODUCT INFORMATION PACKET

Model No: 132595.00

Catalog No: 132595.00

3 HP General Purpose Motor, 3 phase, 1800 RPM, 230/460 V, 56C Frame, TEFC

Three Phase TEFC Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 4

Product Information Packet: Model No: 132595.00, Catalog No:132595.00 3 HP General Purpose Motor, 3 phase, 1800 RPM, 230/460 V, 56C Frame, TEFC

Nameplate Specifications

Output HP 3 Hp Output KW 2.2 kW Frequency 60 Hz Voltage 230/460 V Current 7.8/3.9 A Speed 1760 rpm Service Factor 1.15 Phase 3 Efficiency 89.5 % Power Factor 80.5 Duty Continuous Insulation Class F Design Code NO DESIGN CODE KVA Code K Frame 56C Enclosure Totally Enclosed Fan Cooled Thermal Protection Thermostats (N/C) Ambient Temperature 40 °C Drive End Bearing Size 6206 Opp Drive End Bearing Size 6205 UL Recognized CSA Y CE Y IP Code 43

Technical Specifications

Electrical Type Squirrel Cage Induction Run Starting Method Across The Line Poles 4 Rotation Reversible Resistance Main 6.08 Ohms Mounting Round Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type NEMA 56 Overall Length 12.52 in Frame Length 8.50 in Shaft Diameter 0.625 in Shaft Extension 1.88 in Assembly/Box Mounting F1/F2 CAPABLE Outline Drawing 036202-850 Connection Drawing 005010.20

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:27/05/2020

2 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 4

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 7' 30" .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

200 5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

036202

KIR

03/30/16

E SD 11/25/2019

ECO-0177539 AB 11/25/2019

NOTES ADDED

OUTLINE

OL132522

184TCZ FRAME TEFC-"C" FACE

WARNING

NOTES.

1) GASKETS THROUGHOUT.

2) MAXIMUM FACE RUNOUT TO BE .004 [.101] T.I. R.

3) MAXIMUM PILOT ECCENTRICITY TO BE .004 [ .101] T.I. R.

4) PERMISSIBLE SHA FT RUNOUT TO BE .010 [. 254] T.I .R .

DASH NO. "C" "AD"

850 13.40 [340.36] 8.12 [206.24] 900 13.90 [353.06] 8.62 [218.94]

1000 14.90 [378.46] 9.62 [244.34]

"C" .06

"AD"

2.06

52.33

1.875

47.625

1.94

49.28

1.41

35.81 FULL

DEPTH

.12

3.05

.6250 .6245

15.8750

15.8623

4.500

4.497

114.300

114.224

6.50

165.10

8.39

213.21

9.22

234.19

.19 [4.82] SQ X

1.38 [35.05] KEY.

(3) Ø1.13 [28.70]

KNOCKOUTS.

WHN REQ

6.71

170.32

5.31

134.94

5.86

148.95

(4) 3/8-16 UNC - 2B X .56 [14.22] DEEP

ON A 5.875 [149.225] B.C.

45° 45°

DECALCONNECTION UNDER COVER WHEN REQ'D

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

200 5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

036202

KIR

03/30/16

E SD 11/25/2019

ECO-0177539 AB 11/25/2019

NOTES ADDED

OUTLINE

OL132522

184TCZ FRAME TEFC-"C" FACE

WARNING

NOTES.

1) GASKETS THROUGHOUT.

2) MAXIMUM FACE RUNOUT TO BE .004 [.101] T.I. R.

3) MAXIMUM PILOT ECCENTRICITY TO BE .004 [ .101] T.I. R.

4) PERMISSIBLE SHA FT RUNOUT TO BE .010 [. 254] T.I .R .

DASH NO. "C" "AD"

850 13.40 [340.36] 8.12 [206.24] 900 13.90 [353.06] 8.62 [218.94]

1000 14.90 [378.46] 9.62 [244.34]

Uncontrolled Copy

3 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 4

VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.

TSTAT(S)

Uncontrolled Copy

T1 T2

T3 T4

T4 T5

T5 T6

T6 T7

T7 T8

T8 T9

T9 RED(P1)

RED(P1) RED(P2)

RED(P2)

LINE LEADS

DATE

REVISION BY

DRAWING REVISION

ECO

ECO DESCRIPTION

ECO-0121253

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,

BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED

BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT

TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

REVISION BY

APPROVED BY

ADDED P1 & P2 FOR TSTAT

MVG

DATE

04/05/2017

DATE

04/05/2017

TOLERANCES UNLESS

TOLERANCES UNLESS OTHERWISE SPECIFIED:

OTHERWISE SPECIFIED: DEC.

DEC.

INCH mm ANGLE

.X 0.1 [ 2.5] 0.5

.X 0.1 [ 2.5] 0.5 .XX 0.01 [ 0.25]

.XX 0.01 [ 0.25] .XXX 0.005 [ 0.127]

.XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127]

.XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP

REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45

EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51]

CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

MACHINED SURFACES: INCH mm

INCH mm mm SHOWN IN [BRACKETS]

mm SHOWN IN [BRACKETS]

125 3.2

DRAWN BY

DBT 12/16/97

DATE

APPROVED BY

KH 12/17/97

DATE

REFERENCE

THIRD ANGLE

THIRD ANGLE PROJECTION

PROJECTION

VOLTAGE L1 L2 L3 JOIN & INSULATE

(T4,T7)

HIGH T1 T2 T3

LOW T1,T7 T2,T8 T3,T9 T4,T5,T6

Regal Beloit America, Inc.

DESCRIPTION

CONN DIAGRAM-EXTERNAL

3 PHASE WITH PROTECTOR

MATERIAL

DECAL - 004014 (TSTAT) - 080582

SIZE DRAWING NUMBER

00501020

PROCESS/FINISH

(T5,T8)

(T5,T8) (T6,T9)

(T6,T9)

STOCK

SHEET

1 OF 1

4 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 4

Leeson 132595.00 Product Information Packet

Specifications and Main Features

Frequently Asked Questions

User Manual