Leeson 132480.00 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 132480.00

Catalog No: 132480.00

5 HP Brake Motor, 3 phase, 1800 RPM, 230/460 V, 184TC Frame, TEFC

NEMA Definite Purpose AC Brake Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2020 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 4

Product Information Packet: Model No: 132480.00, Catalog No:132480.00 5 HP Brake Motor, 3 phase, 1800 RPM, 230/460 V, 184TC Frame, TEFC

Nameplate Specifications

Output HP 5 Hp Output KW 3.7 kW
Frequency 60 Hz Voltage 230/460 V
Current 12.6/6.3 A Speed 1760 rpm
Service Factor 1.15 Phase 3
Efficiency 89.5 % Power Factor 83
Duty Continuous Insulation Class F
Design Code B KVA Code G
Frame 184TC Enclosure Totally Enclosed Fan Cooled
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6206 Opp Drive End Bearing Size 6205
UL Recognized CSA Y
CE Y IP Code 43

Technical Specifications

Electrical Type Squirrel Cage Induction Run Starting Method Across The Line
Poles 4 Rotation Reversible
Resistance Main 2.68 Ohms Mounting Round
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type T Overall Length 20.98 in
Frame Length 10.50 in Shaft Diameter 1.125 in
Shaft Extension 2.75 in Assembly/Box Mounting F1/F2 CAPABLE
Connection Drawing 005010.15 Outline Drawing 035362-1050

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:27/05/2020

2 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 4

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

1

2

4

3

A

B

2

4

3

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

035362

PG 9/24/97

RSK 9/24/97

G AS 12/20/2016

ECO-0115070 GR 12/20/2016

ADDED DASH # 1000 &# 1050

OUTLINE

BRAKE MOTOR

TEFC - "C" FACE

DASH

NO.

"C" "AD"

650 16.98 5.87
700 17.48 6.37
750 17.98 6.87
800 18.48 7.37
850 18.98 7.87
900 19.48 8.37

950 19.98 8.87
1000 20.48 9.37
1050 20.98 9.87

BRAKE

TORQUE

"X"

15 FT-LB 4.00
20 FT-LB 4.46
25 FT-LB 4.46

1.1250

1.1245

2.63

2.750

2.90

.27

8.500

8.497

"C" .06

6.53

8.39

.15

"X"

.60

1.78

FULL

DEPTH

HOUSING

2.94
CLEARANCE
TO REMOVE

9.62

"AD"

NAMEPLATE

WARNING

EFF.

1/2-14 NPT
CONDUIT
HOLE

.25 SQ. X 1.75 KEY

(3) 1.13 KNOCKOUTS

GASKETS THROUGHOUT
MAXIMUM FACE RUNOUT TO BE .004 T.I.R.
MAXIMUM PILOT ECCENTRICITY TO BE .004 T.I.R.
PERMISSIBLE SHAFT RUNOUT TO BE .002 T.I.R.

45°

45°

5.32

6.57

5.86
REF.

(4) 1/2-13 UNC-2B X .75 DEEP
ON A 7.250 B.C.

DECAL­BRAKE
CONNECTION
UNDER COVER

BRAKE HOUSING

MANUAL
BRAKE
RELEASE

LIFT WARNING

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

1

2

4

3

A

B

2

4

3

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

035362

PG 9/24/97

RSK 9/24/97

G AS 12/20/2016

ECO-0115070 GR 12/20/2016

ADDED DASH # 1000 &# 1050

OUTLINE

BRAKE MOTOR

TEFC - "C" FACE

DASH

NO.

"C" "AD"

650 16.98 5.87
700 17.48 6.37
750 17.98 6.87
800 18.48 7.37
850 18.98 7.87
900 19.48 8.37

950 19.98 8.87
1000 20.48 9.37
1050 20.98 9.87

BRAKE

TORQUE

"X"

15 FT-LB 4.00
20 FT-LB 4.46
25 FT-LB 4.46

Uncontrolled Copy

3 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 4

VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.

(T4,T7)

(T5,T8)

2(RED)

CAUTION:
LEAD WIRE INSULATION TO EXTEND
MINIMUM OF 1/4" INTO CONNECTOR
INSULATION

LINE LEADS

T1 T7

T5

BRAKE

RBC PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of REGAL BELOIT CORPORATION ("RBC") including
its subsidiaries and divisions and contains proprietary information of RBC. This document
is loaned on the express condition that neither it nor the information contained therein shall
be disclosed to others without the express written consent of RBC, and that the information
shall be used by the recipient only as approved expressly by RBC. This document shall be
returned to RBC upon its request. This document may be subject to certain restrictions
under U.S. export control laws and regulations.

REDRAWN IN SOLIDWORKS

01--ADDED DINGS AND BRAKE TABLE (PER CN114156)

NO

THIRD ANGLE

PROJECTION

10/16/2013 10:10:02 AM - Converted by Connexus

REVISION

VJB
TMZ

BY & DATE

T1
T2

T3
T4
T5
T6
T7

T8

VOLTAGE L1 L2 L3

T9

SEE TABLE FOR
BRAKE CONNECTIONS

REF. DECAL (MOTOR) - 004014
REF. DECAL (BRAKE) - 080034 (STEARNS & DINGS BRAKE)

TYPE "T" W/O PROTECTOR

BRAKE CONNECTION

STERNS BRAKE DINGS BRAKE

L1 L2 Join L1 L2 Join

3(BLACK)
4(BLACK)

1(RED)

4(BLACK

----------

EXTERNAL WIRING DIAGRAM
STANDARD 3 PHASE - DUAL VOLTAGE
W/STEARNS OR DINGS DUAL VOLTAGE BRAKE CONN.

LEESON STOCK

02/08/11
11/12/96

VOLTAGE

HIGH 1(RED) 2(RED)

LOW

TOLERANCES

UNLESS SPECIFIED

DEC

INCHES
±.1

.X
.XX

±.01

.XXX

±.005

.XXXX

±.0005

ANG

CHK
RFP
NETWORK FILE NAME

±1/2°

3(BLACK)

TITLE

MAT'L
FINISH
PREV

00501015

4 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 4

T4

T2

T6

T9

T8

T3

JOIN &

INSULATE

HIGH T1 T2 T3

(T6,T9)

LOW T1,T7 T2,T8 T3,T9 T4,T5,T6

2(BLACK) 4(YELLOW)
2(BLACK)

3(BLACK)

1(YELLOW)
4(YELLOW)

DRAWN
CHK
APPR
SCALE
REF
FMF
PAGE

DRAWING NOSIZE REV

A

005010-15

1(YELLOW)

3(BLACK)

------------

JJK 09/17/96

1:1

005010-01

OF

--