PRODUCT INFORMATION PACKET
Model No: 122129.00
Catalog No: 122129.00
1 HP Variable Speed Motor, 3 phase, 1800 RPM, 230/460 V, 143TC Frame, TENV
1000:1 Speed Ratio Motors
Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.
©2019 Regal Beloit Corporation, All Rights Reserved. MC017097E
1 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 4
Product Information Packet: Model No: 122129.00, Catalog No:122129.00 1 HP Variable Speed Motor, 3 phase, 1800 RPM, 230/460 V, 143TC Frame,
TENV
Nameplate Specifications
Output HP 1 Hp Output KW 0.75 kW
Frequency 60 Hz Voltage 230/460 V
Current 3.0/1.5 A Speed 1750 rpm
Service Factor 1 Phase 3
Efficiency 84 % Power Factor 75
Duty Continuous Insulation Class F
Design Code INV KVA Code P
Frame 143TC Enclosure Totally Enclosed Non Ventilated
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6205 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE Y IP Code 43
Technical Specifications
Electrical Type Squirrel Cage Inverter Duty Starting Method Inverter Only
Poles 4 Rotation Reversible
Resistance Main 13.5 Ohms Mounting Rigid base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type T Overall Length 15.04 in
Frame Length 8.56 in Shaft Diameter 0.875 in
Shaft Extension 2.25 in Assembly/Box Mounting F1 Only
This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019
2 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 4
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
200 5.1
INCH mm
mm SHOWN IN [BRACKETS]
12
43
A
B
2
43
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
108752
A.SUPPANNAVAR
08/27/2018
JD
09/19/2018
A
ECO-0152983
OUTLINE CONVERSION PROJECT
OUTLINE
104059
140T FR.-BB-TENV-C" FACE -3Ø
TERM END
NOTE:-
1) CONDUIT BOX CAN BE ROTATED 180°
2) REMOVABLE BASE.
3) NAMEPLATE TO BE READ FROM CONDUIT BOX SIDE OF MOTOR.
DASH "C" "AG" "BS"
856 15.04 [391.12] 10.61 [269.19] 4.94 [125.48]
2.12
53.96
.16
.10
3.94
2.41
4.500
4.497
114.287
114.211
.8750
.8745
22.2237
22.2110
3.140
79.756
6.500
165.100
"C"
"AG"
.16
.10
3.94
2.41
.6250
.6245
15.8753
15.8626
4.500
4.497
114.287
114.211
.126
3.189
2.75
69.92
5.000
127.000
4.000
101.600
"BS"
1.756
44.591
.554
14.083
.19 [4.83] X .19 [4.83]
X 1.38 [35.05] KEY.
.19 [4.83] X .19 [4.83]
X 1.62 [41.15] KEYWAY.
SLINGER
STUD BOLT
HEAD
.004 A.004 A
.004 A
.004 A
A
6.500
165.100
.120
3.038
6.723
170.76
3.50
3.44
88.98
87.45
8.672
220.271
5.422
137.724
4.493
114.127
6.500
165.100
1.810
45.974
1.580
40.132
1.220
30.988
5.890
5.860
149.597
148.835
45° TYP
5.500
139.700
2.750
69.850
3-Ø.88 [22.35]
KNOCKOUTS
2-Ø1.09 [27.68]
KNOCKOUTS
3/8-16 UNC -2B
.56 [14.22] MIN. FULL THD
4 HOLES.
Ø.18 [4.57]
HOLE
Ø.34 [8.64] - .35 [8.89]
6-HOLES.
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
200 5.1
INCH mm
mm SHOWN IN [BRACKETS]
12
43
A
B
2
43
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
108752
A.SUPPANNAVAR
08/27/2018
JD
09/19/2018
A
ECO-0152983
OUTLINE CONVERSION PROJECT
OUTLINE
104059
140T FR.-BB-TENV-C" FACE -3Ø
TERM END
NOTE:-
1) CONDUIT BOX CAN BE ROTATED 180°
2) REMOVABLE BASE.
3) NAMEPLATE TO BE READ FROM CONDUIT BOX SIDE OF MOTOR.
DASH "C" "AG" "BS"
856 15.04 [391.12] 10.61 [269.19] 4.94 [125.48]
Uncontrolled Copy
3 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 4
Uncontrolled Copy
HIGH VOLTAGE
(U1) T1
(V1) T2
(W1) T3
(U2) T4
(U3) T7
(V2) T5
(V3) T8
(W2) T6
(W3) T9
LOW VOLTAGE
(U1) T1
(U3) T7
(V1) T2
(V3) T8
LOW VOLTAGE
T4 T5 T6
P1
HIGH VOLTAGE
T4 T7 T5 T8 T6 T9
L1
L2
L3
L1 T7 T1 L2 T8 T2 L3 T9 T3
L1 T1 L2 T2 L3 T3
P2
NOTE FOR FACTORY USE ONLY:
TO SURGE TEST FOR COMMON CONNECT:
HIGH VOLT: CONNECT P1 TO T1
THEN P2 TO L1
LOW VOLT: CONNECT P1 TO T1 & T7,
THEN P2 TO L1
L1
L2
P1
P2
PROT.
THREE PHASE
DUAL VOLTAGE MOTOR
PROT.
T1
T4
T7
T9
T6
T3
T8
T5
THERMO-PROTECTORS
CONNECTED IN SERIES
RED
OR
PURPLE
BLACK
BLACK
YELLOW
BROWN
ORANGE
BLACK
BLACK
T2
PURPLE
RED
BLUE
OR
RED
P1 (TB1)
T1 (U1)
T4 (U2)
T9 (W3)
T7 (U3)
T8 (V3)
T6 (W2)
T5 (V2)
T2 (V1)
T3 (W1)
P2 (TB2)
(W1) T3
(W3) T9
L3
(U2) T4
(V2) T5
(W2) T6
DRAWING REVISION
ECO
ECO DESCRIPTION
T
ECO-0159915
ADDED TERMINAL CONNECTION DIAGRAM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
REVISION BY
ZR
APPROVED BY
DR
NOTE: LEAD'S COLOR CAN BE YELLOW OR WHITE FOR MT2 PLANT
DATE
01-14-2019
DATE
01-15-2019
DRAWN BY
DATE
APPROVED BY
DATE
REFERENCE
THIRD ANGLE
PROJECTION
SMC
05-13-1992
05-13-1992
EE7308/EE7300
PROT.
VIEW OF TERMINAL END
TM
Regal Beloit America, Inc.
TB
DESCRIPTION
CONN DIAGRAM-INTERNAL
MATERIAL
SIZE
DRAWING NUMBER
3 PHASE - DUAL VOLTAGE MOTOR
A
4 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 4
EE7308T
PROCESS/FINISH
SHEET
1 OF 1
Loading...