PRODUCT INFORMATION PACKET
Model No: 122114.00
Catalog No: 122114.00
2 HP Close-Coupled Pump Motor, 3 phase, 1800 RPM, 230/460 V, 145JPV Frame, TEFC
JP Motors
Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.
©2019 Regal Beloit Corporation, All Rights Reserved. MC017097E
1 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 4
Product Information Packet: Model No: 122114.00, Catalog No:122114.00 2 HP Close-Coupled Pump Motor, 3 phase, 1800 RPM, 230/460 V, 145JPV
Frame, TEFC
Nameplate Specifications
Output HP 2 Hp Output KW 1.5 kW
Frequency 60 Hz Voltage 230/460 V
Current 6.0/3.0 A Speed 1760 rpm
Service Factor 1.15 Phase 3
Efficiency 86.5 % Power Factor 71
Duty Continuous Insulation Class F
Design Code A KVA Code N
Frame 145JPV Enclosure Totally Enclosed Fan Cooled
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6206 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE Y IP Code 43
Technical Specifications
Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter
Poles 4 Rotation Reversible
Resistance Main 6.58 Ohms Mounting Round
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type JP Overall Length 20.90 in
Frame Length 9.56 in Shaft Diameter 0.875 in
Shaft Extension 7.31 in Assembly/Box Mounting F1 Only
This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019
2 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 4
4 21
4 21
3
3
Uncontrolled Copy
9.06
6.48
230.12
D
D
C
7.36
187.05
7.12
180.88
C
("C")
D
D
7.31
("AG")
5.952
5.922
151.183
150.421
1.578
1.548
1.156
1.154
29.362
29.312
40.084
39.322
SLINGER
R.05
1.23
NAMEPLATE READ
FROM CONDUIT BOX SIDE
C
C
A
3.14
79.76
.16
.10
3.94
2.41
185.55
R.05
1.23
1.0000
.9995
25.4000
25.3873
.09[2.28]X.19[4.82]X1.65[41.91]
.75[19.05] FULL THD.
4.500
4.497
114.287
114.211
.8745
.8740
22.2123
22.1996
.004 A
KEYWAY
3/8-16UNC-3B
1 HOLE
2-Ø1.09[27.68]
KNOCKOUTS
1.22
30.99
1.81
45.97
1.58
40.13
5.38
136.59
4.48
113.71
164.59
45° 45°
B
B
TERM END
A
A
B
SHEET
SHEET
1 OF1
1 OF1
B
A
A
3-Ø.88[22.35]
.12
3.17
.004 A
KNOCKOUTS
"BV"
DRAWING REVISION REVISION BY DATE
DRAWING REVISION REVISION BY DATE
A
A
ECO
ECO
ECO-0136108
ECO-0136108
ECO DESCRIPTION
ECO DESCRIPTION
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
DASH
DASH
NO.
NO.
956 20.90[530.86]13.59[345.18] 8.82[224.02]
956 20.90[530.86]13.59[345.18] 8.82[224.02]
4 21
4 21
"C" "AG" "BV"
"C" "AG" "BV"
3
3
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
APPROVED BY DATE
APPROVED BY DATE
OUTLINE CONVERSION PROJECT
OUTLINE CONVERSION PROJECT
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
REGAL BE LOIT AM ERICA, INC. (" OWNER") A ND CO NTAINS OWNE R'S PROPRIE TARY
REGAL BE LOIT AM ERICA, INC. (" OWNER") A ND CO NTAINS OWNE R'S PROPRIE TARY
BE RETURNED TO O WNER UPON REQ UEST. IT M A Y BE SUBJ E CT TO CERTAIN
BE RETURNED TO O WNER UPON REQ UEST. IT M A Y BE SUBJ E CT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
OTHERWISE SPECIFIED:
DEC. INCH mm ANGLE
DEC. INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.X 0.1 [ 2.5] 7' 30"
.XX 0.02 [ 0.51]
.XX 0.02 [ 0.51]
.XXX 0.005 [ 0.127]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
REMOVE BURRS & BREAK SHARP
EDGES: .003/ .015 [ . 076/ . 381] X 45
EDGES: .003/ .015 [ . 076/ . 381] X 45
CORNER FILLETS: R.02 [.51]
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
MACHINED SURFACES:
INCH mm
INCH mm
mm SHOWN IN [BRACKETS]
mm SHOWN IN [BRACKETS]
200
200
3 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 4
5.1
5.1
5.890
5.860
149.597
148.835
DRAWN BY
DRAWN BY
A. KEETHA
A. KEETHA
DATE
DATE
02/27/2018
02/27/2018
APPROVED BY
APPROVED BY
DATE
DATE
05/18/2018
05/18/2018
REFERENCE
REFERENCE
100659
100659
THIRD ANGLE
THIRD ANGLE
PROJECTION
PROJECTION
.56[14.22] MIN.FULL THD.
PST
PST
3/8-16 UNC-2B
4 HOLES
NOTE:
NOTE:
CONDUIT BOX CAN BE ROTATED 180°.
CONDUIT BOX CAN BE ROTATED 180°.
TM
TM
Regal Beloit America, Inc.
Regal Beloit America, Inc.
DESCRIPT ION
DESCRIPT ION
140 FRAME-1Ø-BB-C'FACE-TEFC
MATERIAL
MATERIAL
SIZE
SIZE
140 FRAME-1Ø-BB-C'FACE-TEFC
DRAWING NUMB ER
DRAWING NUMB ER
C 108643
C 108643
OUTLINE
OUTLINE
PROCESS/FINISH
PROCESS/FINISH
Uncontrolled Copy
4 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 4
Loading...