Leeson 119975.00 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: CZ6T17TK5B

Catalog No: 119975.00

1HP..1725RPM.56.TENV.230/460V.3PH.60HZ.CONT.40C.1.15SF.RIGID C......EXTREME DUCK.NOT.......

Encapsulated

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2018 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 5

Product Information Packet: Model No: CZ6T17TK5B, Catalog No:119975.00

1HP..1725RPM.56.TENV.230/460V.3PH.60HZ.CONT.40C.1.15SF.RIGID C......EXTREME DUCK.NOT.......

Nameplate Specifications

Output HP
Frequency 60 Hz Voltage 230/460 V
Current
Service Factor
Efficiency 85.5 % Duty Continuous
Insulation Class
KVA Code N Frame 56C
Enclosure Totally Enclosed Non Ventilated Overload Protector No
Ambient Temperature
Opp Drive End Bearing Size 6205 UL Recognized
CSA
IP Code

1 Hp

2.8/1.4 A

1.15

F

40 °C

Y
69

Output KW

Speed
Phase

Design Code

Drive End Bearing Size

CE

0.75 kW

1750 rpm
3

B

6205

Y

Technical Specifications

Electrical Type
Poles 4 Rotation Reversible

Squirrel Cage Inverter Rated

Starting Method

Line Or Inverter

Mounting
Drive End Bearing BALL Opp Drive End Bearing BALL
Frame Material Stainless Steel Shaft Type NEMA 56
Overall Length
Shaft Diameter 0.625 in Shaft Extension 1.88 in
Assembly/Box Mounting
Outline Drawing

Rigid base

13.21 in

F1/F2 CAPABLE
607-0188-800

Motor Orientation

Frame Length

Connection Diagram

HORIZONTAL

8.00 in

005010.52

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created: 10/15/2018

2 of 5

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMER ICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTI AL INFORMATION - THIS DOCU MENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE T H AT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AN D /OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVAN C E BY O W NER . THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGUL AT IONS.

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMER ICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTI AL INFORMATION - THIS DOCU MENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE T H AT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AN D /OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVAN C E BY O W NER . THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGUL AT IONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200

5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

4

3

A

B

2

4

3

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

607-0188

LST

11/19/14

C AS 06/05/2017

ECO-0124772 JD 06/05/2017

APPLIED KEY DETAIL & PLUGGED HOLE.

MOTOR ASSY

56C FRAME - TENV RIGID "C"

DASH

NO

"C" "AD"

525

10.46

4.44

550

10.71

4.69

575

10.96

4.94

600

11.21

5.19

625

11.46

5.44

650

11.71

5.69

675

11.96

5.94

700

12.21

6.19

725

12.46

6.44

750

12.71

6.69

775

12.96

6.94

800 13.21 7.19

4.500

4.497

114.300

114.224

6.56

1.94

49.15

1.875

47.63

2.06

52.32

.13

3.18

4.75

120.65

.6250
.6245

15.8750

15.8623

"C" .06

.34

8.64

1.41

35.81
FULL

DEPTH

.06

1.52

2.75

69.85

3.00

76.20

"AD"

NAMEPLATE

1/2-14 NPT
CONDUIT HOLE
(PLUGGED)

.19 SQ X 1.38 KEY

.004 A

.002 B

.004 A

B

.130

3.302

6.50

165.10

45°

45°

3.50

3.44

88.90

87.38

2.47

62.74

4.94

125.48

1.22

30.99

6.78

172.21

SHAFT
SEAL

(4) 3/8-16 UNC-2B X .56
DEEP ON A 5.875
B.C.

1/8-27 NPT
PIPE PLUG

A

3/4" HEX DRIVER
FOR COVER REMOVAL

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMER ICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTI AL INFORMATION - THIS DOCU MENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE T H AT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AN D /OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVAN C E BY O W NER . THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGUL AT IONS.

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMER ICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTI AL INFORMATION - THIS DOCU MENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE T H AT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AN D /OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVAN C E BY O W NER . THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGUL AT IONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200

5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

4

3

A

B

2

4

3

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

607-0188

LST

11/19/14

C AS 06/05/2017

ECO-0124772 JD 06/05/2017

APPLIED KEY DETAIL & PLUGGED HOLE.

MOTOR ASSY

56C FRAME - TENV RIGID "C"

DASH

NO

"C" "AD"

525

10.46

4.44

550

10.71

4.69

575

10.96

4.94

600

11.21

5.19

625

11.46

5.44

650

11.71

5.69

675

11.96

5.94

700

12.21

6.19

725

12.46

6.44

750

12.71

6.69

775

12.96

6.94

800 13.21 7.19

Uncontrolled Copy

3 of 5

VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.

Uncontrolled Copy

LINE LEADS

YELLOW (T1)

WHITE (T2)

ORANGE(T3)

BLUE (T4)

BLACK (T5)

PURPLE (T6)

PINK (T7)

RED (T8)

GRAY (T9)

GRAY
(T9)

ORANGE
(T3)

BLUE
(T4)

YELLOW
(T1)

PINK
(T7)

BLACK
(T5)

PURPLE
(T6)

WHITE
(T2)

RED
(T8)

RBC PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of REGAL BELOIT CORPORATION ("RBC") including
its subsidiaries and divisions and contains proprietary information of RBC. This document
is loaned on the express condition that neither it nor the information contained therein shall
be disclosed to others without the express written consent of RBC, and that the information
shall be used by the recipient only as approved expressly by RBC. This document shall be
returned to RBC upon its request. This document may be subject to certain restrictions
under U.S. export control laws and regulations.

DRAWING REVISION

C

ECO

ECO-0049985

ECO DESCRIPTION

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

REVISION BY

PVR

APPROVED BY

JD

UPDATED PER ECO-0049985

DATE

04/23/14

DATE

04/23/14

TOLERANCES UNLESS
OTHERWISE SPECIFIED:

DEC.

INCH

mm

.X
.XX
XXX
.XXXX
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381]
CORNER FILLETS: .02 [.51]
MACHINED SURFACES:
INCH mm
mm SHOWN IN [BRACKETS]

0.1 [ 2.5]

0.01 [

0.005 [ 0.127]

0.0005 [ 0.0127]

0.25]

125

ANGLE

DRAWN BY

DATE

0.5

APPROVED BY

DATE

PROCESS/FINISH

3.2
THIRD ANGLE

PROJECTION

LST

4/3/14

VOLTAGE

HIGH

LOW

L1 L2 L3

T1 T2 T3

T1,T7 T2,T8 T3,T9

TM

INSULATE

Regal Beloit America, Inc.

DESCRIPTION

LEAD ASSY

EXT. WIRING DIA. 3 PH. W/O PROT.

MATERIAL

SIZE

DRAWING NUMBER

A

4 of 5

00501052

JOIN &

(T4,T7)
(T5,T8)
(T6,T9)

T4,T5,T6

SHEET

1 OF 1

Model No 119975.00

HZ

5/21/2018

1800

1800

Uncontrolled Copy

LEESON ELECTRIC CORPORATION

TYPICAL PERFORMANCE CURVE for AC MOTOR

Curve at 460 Volts HP 1&3/4

60 HZ

1 HP VOLTS 230/460&190/380

3

Catalog No 119975.00

60 70 80 90 100

EFF

60 70 80 90 100

PF

HP

60&50 RPM 1750&1450

Eff −

−

−−

PF −

−

−−

HP −

−

−−

RPM −

−

−−

KW −

−

−−

Amps −

−

−−

1810 1820 1830 1840

1.2 1.4 1.6 1.8 2

RPM

0.6 0.7 0.8 0.9 1

KW

1810 1820 1830 18400.6 0.7 0.8 0.9 11.2 1.4 1.6 1.8 2

60 70 80 90 10060 70 80 90 1001.2 1.4 1.6 1.8 2

PF

HP

KW

EFF

RPM

AMPS

0 10 20 30 40 50

0 10 20 30 40 50

0 0.5 1 1.5 2 2.5 3 3.5

FL TORQUE 3.003 Lb.Ft FL AMPS 2.8/1.4
BD TORQUE 12.9 Lb.Ft PU TORQUE 11.4 Lb.Ft
LR TORQUE 10.38 Lb.Ft LR AMPS 12.43
WINDING T634471-3 Date

0 0.2 0.4 0.6 0.8 1

0 0.5 1 1.5 2 2.5 3 3.5

0 0.5 1 1.5 2 2.5 3 3.5

0 0.1 0.2 0.3 0.4 0.5

1740 1750 1760 1770 1780 1790

0 0.5 1 1.5 2 2.5 3 3.5

Torque

0 10 20 30 40 50

0 10 20 30 40 50

0 0.2 0.4 0.6 0.8 1

0 0.1 0.2 0.3 0.4 0.5

0 0.2 0.4 0.6 0.8 1

1740 1750 1760 1770 1780 1790

0 0.5 1 1.5 2 2.5 3 3.5

0 0.5 1 1.5 2 2.5 3 3.5

0 0.5 1 1.5 2 2.5 3 3.5

0 0.5 1 1.5 2 2.5 3 3.5

0 0.5 1 1.5 2 2.5 3 3.5

0 0.5 1 1.5 2 2.5 3 3.5

0 0.5 1 1.5 2 2.5 3 3.5

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque in Lb.Ft

5 of 5