PRODUCT INFORMATION PACKET
Model No: 119485.00
Catalog No: 119485.00
1 HP Washdown Motor, 3 phase, 1800 RPM, 208-230/460 V, 56C Frame, TENV
White Epoxy Brake Motors
Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.
©2020 Regal Beloit Corporation, All Rights Reserved. MC017097E
1 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 51 of 5
Product Information Packet: Model No: 119485.00, Catalog No:119485.00 1 HP Washdown Motor, 3 phase, 1800 RPM, 208-230/460 V, 56C Frame,
TENV
Nameplate Specifications
Output HP 1 Hp Output KW 0.75 kW
Frequency 60 Hz Voltage 208-230/460 V
Current 3.0-2.8/1.4 A Speed 1750 rpm
Service Factor 1.15 Phase 3
Efficiency 85.5 % Power Factor 77.7
Duty Continuous Insulation Class F
Design Code B KVA Code L
Frame 56C Enclosure Totally Enclosed Non Ventilated
Thermal Protection Thermostats (N/C) Ambient Temperature 40 °C
Drive End Bearing Size 6205 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE Y IP Code 55
Technical Specifications
Electrical Type Squirrel Cage Induction Run Starting Method Across The Line
Poles 4 Rotation Reversible
Resistance Main 0 Ohms Mounting Round
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type NEMA 56 Overall Length 17.00 in
Frame Length 8.00 in Shaft Diameter 0.625 in
Shaft Extension 1.87 in Assembly/Box Mounting F1 ONLY
Outline Drawing 607-0280-800 Connection Drawing 005010.28
This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:14/10/2020
2 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 52 of 5
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.XX 0.01 [ 0.25]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
125 3.2
INCH mm
mm SHOWN IN [BRACKETS]
12
43
A
B
2
43
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
607-0280
JD
11/16/2016
JD
11/16/2016
B ARV 7/30/20
ECO-0190087 LT 7/30/20
UPDATED DECAL NOTE
OUTLINE
029007
TENV - ROUND "C" FACE - BRAKEMOTOR
PERMISSIBLE SHAFT RUNOUT .002 TIR
MAXIMUM PILOT ECCE NTRICITY .004 TIR
MAXIMUM FACE RUNOUT TO BE .004 TIR
DASH
NO.
"C" "AD"
500 14.00 5.00
550 14.50 5.50
600 15.00 6.00
650 15.50 6.50
700 16.00 7.00
750 16.50 7.50
800 17.00 8.00
ORACLE
REV
001
.12
1.94
4.500
4.497
.6250
.6245
1.41
FULL
DEPTH
.07 1.875
"C" .06
.60
4.06 "AD"
6.52
DECAL CONNECTION
UNDER COVER
WHEN REQUIRED
(2) 1/2-14 NPT CONDUIT
HOLE (PLUGGED)
(1) EACH SIDE
WASHGUARD FEATURES:
1) SHAFT SEAL & V-RI N G
2) PLUGGED DRAIN HOLES IN ENDBELLS & CONDUIT BOX
3) STAINLESS STEEL SHAFT, HARDWARE, & NAMEPLATE
4) GASKETS THROUG H O U T
NOTE:
2.94" REQ'D. TO
REMOVE HOUSING
.19 SQ. x 1.38
KEY
WASHGUARD
DECAL
NAMEPLATE DRAIN INS.
DECAL
WARNING
DEACL
BRAKE RELEASE
LEVER
BRAKE CONNECTION DEC AL
4.26
5.52
45°
45°
(1) 1/2-14 NPT
CONDUIT HOLE
(PLUGGED)
3/8-16 UNC-2B x .56 DP.
(4) REQ'D. ON A Ø5.875 B.C.
FRAME WELD
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.XX 0.01 [ 0.25]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
125 3.2
INCH mm
mm SHOWN IN [BRACKETS]
12
43
A
B
2
43
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
607-0280
JD
11/16/2016
JD
11/16/2016
B ARV 7/30/20
ECO-0190087 LT 7/30/20
UPDATED DECAL NOTE
OUTLINE
029007
TENV - ROUND "C" FACE - BRAKEMOTOR
PERMISSIBLE SHAFT RUNOUT .002 TIR
MAXIMUM PILOT ECCE NTRICITY .004 TIR
MAXIMUM FACE RUNOUT TO BE .004 TIR
DASH
NO.
"C" "AD"
500 14.00 5.00
550 14.50 5.50
600 15.00 6.00
650 15.50 6.50
700 16.00 7.00
750 16.50 7.50
800 17.00 8.00
ORACLE
REV
001
Uncontrolled Copy
3 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 53 of 5
VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.
(T4,T7)
(T5,T8)
2(RED)
LINE LEADS
TSTAT(S)
BRAKE
RBC PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of REGAL BELOIT CORPORATION ("RBC") including
its subsidiaries and divisions and contains proprietary information of RBC. This document
is loaned on the express condition that neither it nor the information contained therein shall
be disclosed to others without the express written consent of RBC, and that the information
shall be used by the recipient only as approved expressly by RBC. This document shall be
returned to RBC upon its request. This document may be subject to certain restrictions
under U.S. export control laws and regulations.
BRAKE CONNECTION
VOLTAGE
HIGH 1(RED) 2(RED)
LOW
3(BLACK)
STERNS BRAKE DINGS BRAKE
L1 L2 Join L1 L2 Join
3(BLACK)
4(BLACK)
1(RED)
4(BLACK
----------
-- REDRAWN IN SOLIDWORKS VJB 02/08/11
NO
2/11/2011 12:47:03 PM
THIRD ANGLE
PROJECTION
REVISION
BY & DATE
P1
P2
T1
T2
T3
T4
T5
T6
T7
T8
T9
SEE TABLE FOR
BRAKE CONNECTIONS
2(BLACK) 4(YELLOW)
2(BLACK)
3(BLACK)
1(YELLOW)
4(YELLOW)
TOLERANCES
UNLESS SPECIFIED
DEC
INCHES
.X
±.1
.XX
±.01
.XXX
±.005
.XXXX
±.0005
ANG
CHK
RFP
NETWORK FILE NAME
±1/2°
1(YELLOW)
3(BLACK)
------------
TITLE
EXTERNAL WIRING DIAGRAM
3 PHASE W/O PROTECTOR
MAT'L
DECAL - 004014 DECAL - 080088
FINISH
CAMFAB INC.
PREV
00501028
T7T1
T5
T4
T6
T9
T8
T3
VOLTAGE L1 L2 L3
JOIN &
INSULATE
HIGH T1 T2 T3
(T6,T9
LOW T1,T7 T2,T8 T3,T9 T4,T5,T6
DRAWN
CHK
APPR
SCALE
REF
FMF
PAGE
DRAWING NOSIZE REV
A
005010-28
RDW 09/14/99
1:1
005010-15
OF
4 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 54 of 5
T2
--
Curve at
Volts
HP
HZ
Model No
HP
VOLTS
Catalog No
119485.00
HZ 60RPM
1750
Torque in Oz.Ft
FL TORQUE
Oz.Ft
FL AMPS
BD TORQUE
Oz.Ft
PU TORQUE
Oz.Ft
LR TORQUE
166
Oz.Ft
LR AMPS
12.43
WINDING
T634471-3
Date
6/4/2018
Uncontrolled Copy
LEESON ELECTRIC CORPORATION
TYPICAL PERFORMANCE CURVE for AC MOTOR
460
119485.00 1
60
1.00
208-230/460
Eff −
PF −
−
−−
HP −
RPM −
KW −
Amps −
3
−
−−
−
−−
−
−−
−
−−
−
−−
60 70 80 90 100
EFF
0 10 20 30 40 50
60 70 80 90 100
PF
0 10 20 30 40 50
0 10 20 30 40 50 60 70
1.2 1.4 1.6 1.8 2
HP
RPM
0 0.2 0.4 0.6 0.8 1
0 10 20 30 40 50 60 70
0 10 20 30 40 50 60 70
48.04
206.0
1.2 1.4 1.6 1.8 2
1790 1800 1810 1820 1830
KW
0 0.2 0.4 0.6 0.8 1
1730 1740 1750 1760 1770 1780
0 10 20 30 40 50 60 70
Torque
60 70 80 90 10060 70 80 90 1001.2 1.4 1.6 1.8 21790 1800 1810 1820 18301.2 1.4 1.6 1.8 21.2 1.4 1.6 1.8 2
PF
HP
KW
EFF
RPM
AMPS
0 10 20 30 40 50
0 10 20 30 40 50
0 0.2 0.4 0.6 0.8 1
0 0.2 0.4 0.6 0.8 1
0 0.2 0.4 0.6 0.8 1
1730 1740 1750 1760 1770 1780
0 10 20 30 40 50 60 70
0 10 20 30 40 50 60 70
0 10 20 30 40 50 60 70
0 10 20 30 40 50 60 70
0 10 20 30 40 50 60 70
0 10 20 30 40 50 60 70
0 10 20 30 40 50 60 70
Torque
Torque
Torque
Torque
Torque
Torque
Torque
Torque
Torque
Torque
3-2.8/1.4
182.0
5 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 55 of 5
Loading...