PRODUCT INFORMATION PACKET
Model No: 119267.00
Catalog No: 119267.00
0.75 HP Washdown Motor, 3 phase, 1200 RPM, 208-230/460 V, 56C Frame, TENV
Paint Free NEMA Washdown Motors
Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.
©2019 Regal Beloit Corporation, All Rights Reserved. MC017097E
1 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 3
Product Information Packet: Model No: 119267.00, Catalog No:119267.00 0.75 HP Washdown Motor, 3 phase, 1200 RPM, 208-230/460 V, 56C Frame,
TENV
Nameplate Specifications
Output HP 0.75 Hp Output KW 0.56 kW
Frequency 60 Hz Voltage 208-230/460 V
Current 3.1-3.0/1.5 A Speed 1140 rpm
Service Factor 1.15 Phase 3
Efficiency 78.5 % Power Factor 62.7
Duty Continuous Insulation Class F
Design Code B KVA Code J
Frame 56C Enclosure Totally Enclosed Non Ventilated
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6205 Opp Drive End Bearing Size 6205
UL Recognized CSA Y
CE Y IP Code 69
Technical Specifications
Electrical Type Squirrel Cage Induction Run Starting Method Across The Line
Poles 6 Rotation Reversible
Resistance Main 4.65 Ohms Mounting Rigid base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Stainless Steel
Shaft Type NEMA 56 Overall Length 13.21 in
Frame Length 8.00 in Shaft Diameter 0.625 in
Shaft Extension 2.06 in Assembly/Box Mounting F1/F2 CAPABLE
This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019
2 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 3
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMER ICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTI AL INFORMATION - THIS DOCU MENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE T H AT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AN D /OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVAN C E BY O W NER . THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGUL AT IONS.
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMER ICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTI AL INFORMATION - THIS DOCU MENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE T H AT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AN D /OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVAN C E BY O W NER . THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGUL AT IONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
200
5.1
INCH mm
mm SHOWN IN [BRACKETS]
12
4
3
A
B
2
4
3
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
607-0188
LST
11/19/14
C AS 06/05/2017
ECO-0124772 JD 06/05/2017
APPLIED KEY DETAIL & PLUGGED HOLE.
MOTOR ASSY
56C FRAME - TENV RIGID "C"
DASH
NO
"C" "AD"
525
10.46
4.44
550
10.71
4.69
575
10.96
4.94
600
11.21
5.19
625
11.46
5.44
650
11.71
5.69
675
11.96
5.94
700
12.21
6.19
725
12.46
6.44
750
12.71
6.69
775
12.96
6.94
800 13.21 7.19
4.500
4.497
114.300
114.224
6.56
1.94
49.15
1.875
47.63
2.06
52.32
.13
3.18
4.75
120.65
.6250
.6245
15.8750
15.8623
"C" .06
.34
8.64
1.41
35.81
FULL
DEPTH
.06
1.52
2.75
69.85
3.00
76.20
"AD"
NAMEPLATE
1/2-14 NPT
CONDUIT HOLE
(PLUGGED)
.19 SQ X 1.38 KEY
.004 A
.002 B
.004 A
B
.130
3.302
6.50
165.10
45°
45°
3.50
3.44
88.90
87.38
2.47
62.74
4.94
125.48
1.22
30.99
6.78
172.21
SHAFT
SEAL
(4) 3/8-16 UNC-2B X .56
DEEP ON A 5.875
B.C.
1/8-27 NPT
PIPE PLUG
A
3/4" HEX DRIVER
FOR COVER REMOVAL
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMER ICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTI AL INFORMATION - THIS DOCU MENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE T H AT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AN D /OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVAN C E BY O W NER . THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGUL AT IONS.
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMER ICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTI AL INFORMATION - THIS DOCU MENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE T H AT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AN D /OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVAN C E BY O W NER . THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGUL AT IONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
200
5.1
INCH mm
mm SHOWN IN [BRACKETS]
12
4
3
A
B
2
4
3
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
607-0188
LST
11/19/14
C AS 06/05/2017
ECO-0124772 JD 06/05/2017
APPLIED KEY DETAIL & PLUGGED HOLE.
MOTOR ASSY
56C FRAME - TENV RIGID "C"
DASH
NO
"C" "AD"
525
10.46
4.44
550
10.71
4.69
575
10.96
4.94
600
11.21
5.19
625
11.46
5.44
650
11.71
5.69
675
11.96
5.94
700
12.21
6.19
725
12.46
6.44
750
12.71
6.69
775
12.96
6.94
800 13.21 7.19
Uncontrolled Copy
3 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 33 of 3
Loading...