PRODUCT INFORMATION PACKET
Model No: 117761.00
Catalog No: 117761.00
1.50 HP Agricultural Motor, 3 phase, 1800 RPM, 230/460 V, 56 Frame, TEFC
Agricultural Motors
Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.
©2020 Regal Beloit Corporation, All Rights Reserved. MC017097E
1 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 6
Product Information Packet: Model No: 117761.00, Catalog No:117761.00 1.50 HP Agricultural Motor, 3 phase, 1800 RPM, 230/460 V, 56 Frame, TEFC
Nameplate Specifications
Output HP 1.50 Hp Output KW 1.1 kW
Frequency 60 Hz Voltage 230/460 V
Current 4.8/2.4 A Speed 1750 rpm
Service Factor 1.25 Phase 3
Efficiency 86.5 % Power Factor 67.7
Duty Continuous Insulation Class F
Design Code B KVA Code L
Frame 56 Enclosure Totally Enclosed Fan Cooled
Thermal Protection Thermostats (N/C) Ambient Temperature 40 °C
Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE N IP Code 43
Technical Specifications
Electrical Type Squirrel Cage Induction Run Starting Method Across The Line
Poles 4 Rotation Reversible
Resistance Main 9.12 Ohms Mounting Rigid base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type NEMA 56 Overall Length 12.98 in
Frame Length 7.50 in Shaft Diameter 0.625 in
Shaft Extension 1.88 in Assembly/Box Mounting F1 ONLY
Connection Drawing 005010.20 Outline Drawing 029067-750
This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:14/10/2020
2 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 6
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
200 5.1
INCH mm
mm SHOWN IN [BRACKETS]
12
43
A
B
2
43
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
029067
T. AHER
12/13/2017
PK
2/15/2018
A
ECO-0139851
OUTLINE CONVERSION PROJECT
OUTLINE
029032
56 FRAME, TEFC - RIGID
NOTES:
1) GASKETS THROUGHOUT.
DASH
NO.
"C" "AD"
700
12.48
[316.99]
4.13
[104.90]
750
12.98
[329.69]
4.63
[117.60]
4.07
103.44
4.26
108.27
5.32
135.23
3.50
3.44
88.90
87.38
.119
3.023
1.22
30.99
2.44
61.98
4.88
123.95
6.50
165.10
6.74
171.26
(2) Ø1.13[28.70]
KNOCKOUTS
1.41
35.81
FULL
DEPTH
1.875
47.625
1.94
49.29
.07
1.67
"AD"
.63
16.00
.75
19.05
"C" .06[1.52]
3.00
76.20
3.75
95.25
2.75±.09
69.79±2.29
.34
8.64
.6250
.6245
15.8750
15.8623
6.52
165.67
7.65
194.29
ECO-AG
DECAL
DRAIN HOLE
(UNPLUGGED)
ON EACH END
(3) Ø.88[22.35]
KNOCKOUTS
FLINGER
NAMEPLATE
.19[4.83] SQ. X 1.38[35.05]
KEY
N
A
M
E
P
L
A
T
E
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
200 5.1
INCH mm
mm SHOWN IN [BRACKETS]
12
43
A
B
2
43
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
029067
T. AHER
12/13/2017
PK
2/15/2018
A
ECO-0139851
OUTLINE CONVERSION PROJECT
OUTLINE
029032
56 FRAME, TEFC - RIGID
NOTES:
1) GASKETS THROUGHOUT.
DASH
NO.
"C" "AD"
700
12.48
[316.99]
4.13
[104.90]
750
12.98
[329.69]
4.63
[117.60]
Uncontrolled Copy
3 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 6
VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.
VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.
TSTAT(S)
TSTAT(S)
Uncontrolled Copy
T1
T1
T2
T2
T3
T3
T4
T4
T5
T5
T6
T6
T7
T7
T8
T8
T9
T9
RED(P1)
RED(P1)
RED(P2)
RED(P2)
T9
T9
T3
T3
LINE LEADS
LINE LEADS
T1
T1
T7
T7
T4
T4
T5
T5
T6
T6
T8
T8
T2
T2
DATE
REVISION BY
DRAWING REVISION
DRAWING REVISION
ECO
ECO
ECO DESCRIPTION
ECO DESCRIPTION
G
G
ECO-0121253
ECO-0121253
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
REVISION BY
APPROVED BY
APPROVED BY
ADDED P1 & P2 FOR TSTAT
ADDED P1 & P2 FOR TSTAT
MVG
MVG
SM
SM
DATE
04/05/2017
04/05/2017
DATE
DATE
04/05/2017
04/05/2017
TOLERANCES UNLESS
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
OTHERWISE SPECIFIED:
DEC.
DEC.
INCH mm ANGLE
INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.X 0.1 [ 2.5] 0.5
.XX 0.01 [ 0.25]
.XX 0.01 [ 0.25]
.XXX 0.005 [ 0.127]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
MACHINED SURFACES:
INCH mm
INCH mm
mm SHOWN IN [BRACKETS]
mm SHOWN IN [BRACKETS]
125 3.2
125 3.2
DRAWN BY
DRAWN BY
DBT 12/16/97
DBT 12/16/97
DATE
DATE
APPROVED BY
APPROVED BY
KH 12/17/97
KH 12/17/97
DATE
DATE
REFERENCE
REFERENCE
THIRD ANGLE
THIRD ANGLE
PROJECTION
PROJECTION
VOLTAGE L1 L2 L3 JOIN & INSULATE
VOLTAGE L1 L2 L3 JOIN & INSULATE
(T4,T7)
(T4,T7)
HIGH T1 T2 T3
HIGH T1 T2 T3
LOW T1,T7 T2,T8 T3,T9 T4,T5,T6
LOW T1,T7 T2,T8 T3,T9 T4,T5,T6
TM
TM
Regal Beloit America, Inc.
Regal Beloit America, Inc.
DESCRIPTION
DESCRIPTION
CONN DIAGRAM-EXTERNAL
CONN DIAGRAM-EXTERNAL
3 PHASE WITH PROTECTOR
3 PHASE WITH PROTECTOR
MATERIAL
MATERIAL
DECAL - 004014 (TSTAT) - 080582
DECAL - 004014 (TSTAT) - 080582
SIZE DRAWING NUMBER
SIZE DRAWING NUMBER
00501020
A
A
00501020
PROCESS/FINISH
PROCESS/FINISH
(T5,T8)
(T5,T8)
(T6,T9)
(T6,T9)
STOCK
STOCK
SHEET
SHEET
1 OF 1
1 OF 1
4 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 6
²
²
MOUNT
SEVERE
DRIP
WINDING: T634341
CONN. DIAGRAM:
THERMOSTATS PROTECTORS
TSTATS (N/C) NOT
O
N
E
S
T
* NONE PPR
DATE: FT-LB:
R1 (ohms/ph) R2 (ohms/ph) X1 (ohms/ph)
*
BALL BALL
6203 6203
DE ODE
BEARINGS
DE BRACKET
STANDARD
TYPE
PRESSURE @ 3 MAX. LOAD WK²ROTOR WK²POWER
4.5 LB-FT 17.2 LB-FT 382% 20.4 LB-FT 453% 45
65 dBA 74 dBA 0.14
F.L. PF
PH HZ INSL S.F. AMB ELEV.
3 60/50 F 1.15 40 3300
F.L. EFF
HP KW TYPE DESIGN
1.5 1.1 TFR B
OUTLINE: 029032-750
ODE BRACKET TYPE
1/18/2018
0 00
WDG RTD's BRG RTD's
NONE NONE NONE FALSE
X2 (ohms/ph) FLOAT
0
THERMISTORS CONTROL
UL:
Y-(LEESON UL REC)
VOLTAGE: HZ:
NONE NONE
NONE
NA
NONE
NONE
ENCODER:
BRAKE:
NONE
INV. HP SPEED RANGE:
INVERTER TORQUE:
NONE
NONE
NONE
Xm (ohms/ph)
0
VIBRATION (in/sec)
0.150 ODE
HEATERS
NA
POLYREX EM
STANDARD 56
NONE NONE
1144 STRESSPROOF (C-223)
ROLLED STEEL
SPACE
STANDARD
GREASE
18.5
RIGID NO NO NONE
SHAFT TYPE
HORIZONTAL
SPECIAL DE
SPECIAL ODE
NONE
SHAFT MATERIAL
FRAME MATERIAL
GREEN (ENAMEL)
`
TYPE
ORIENTATION
DUTY
LOCATION
COVER SCREENS
PAINT
LB-FT
*** SUPPLEMENTAL INFORMATION ***
MOTOR
0.1
LB-FT
10 SEC. 0 LB.
HAZARDOUS
3
460 V
L.R. TORQUEF.L. TORQUE LR AMPS @
B.D. TORQUE
STARTS/HOURSAFE STALL TIME
F.L. RISE (
°
C)
MOTOR WGT
230/460#190/380 ACROSS THE LINE
86.5 87.2 84.0 GTD EFF
67.7 63.0 55.0 0.0
VOLTS
3/4 LD EFF
4.3/2.15&4.9/2.45
AMPS
START TYPE
1/2 LD EFF
1/2 LD PF3/4 LD PF
CONT
DUTY
SQ CAGE IND RUN
ELECT. TYPE
SYNC RPM FL RPM
1800 1750 56 TEFC
TYPICAL MOTOR PERFORMANCE DATA
FRAME ENCLOSURE
KVA CODE
L
005010.20
FR 3
CERTIFICATION DATA SHEET
Uncontrolled Copy
CAT #:
P.O. BOX 8003
WAUSAU, WI 54401-8003
PH. 715-675-3311
117761.00
DATA VOLTS: 460
5 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 6
Date:
Speed (RPM)
Data Sheet
Current (Amps)
E
0.0
0 200 400 600 800 1000 1200 1400 1600 1800 2000
5.0
10.0
15.0
20.0
25.0
30.0
40.0
50.0
60.0
70.0
80.0
0% 20% 40% 60% 80% 100% 120% 140%
TOR
F
Q
U
100.0
90.0
E
F
F
P
Torque (ft-lb)
Efficiency (%) P.F. (%) Current (Amps)
18.5 16.1 12.1 2.15 1.23 1.5
17.2 16.0 20.4 4.5 0.00 1800
0 900 1600 1750 1800
P.F. (%)
1800 1785 1772 1760 1750 1,738 1732 0
1.23 1.33 1.50 1.81 2.15 2.32 2.52 18.5
0.00 1.10 2.25 3.4 4.5 5.2 5.6 17.2
9.9 35.5 55.0 63.0 67.7 75.0 80.0 48.0
LR Pull-Up BD Rated Idle
1/18/2018 117761.00
Load 0% 25% 50% 75% 100% 115% 125% LR
Current (Amps)
Torque (ft-lb)
RPM
Efficiency (%)
Motor Speed Data
LOAD
Torque Amps
74.4 84.0 87.2 86.5 86.0 85.5
Uncontrolled Copy
Speed -Torque Curve
Motor Load Data
RPM
0.0
0.0000 0.0000 0.0000 0.0000 0.0000
R1 R2 X1 X2 Xm
EQUIV CKT (OHMS / PHASE)
0.5
0
0
Additional Specifications:
1.0
VFD Rating
Outline Dwg 029032-750
Conn. Diag 005010.20
NONE
1.5
Rotor/Shaft wk²
Ref Wdg
Sound Pressure @ 1M
T634341 FR
0.14
65 dBA
2.0
A
M
P
S
Duty
Ambient
Elevation
2.5
3.0
Construction
Voltage
Frequency
Design
LR Code letter
Service Factor
Temp Rise @ FL
HP
Sync. RPM
Frame
Enclosure
Information Block
230/460#190/380
CONT
1,000
1.15
45
40
60
B
L
TEFC
TFR
140
Data @
feet
Lb-Ft²
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
A
M
P
S
°
°
C
C
Hz
V
460
v
6 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 6
Loading...