Leeson 117701.00 PRODUCT INFORMATION PACKET

PRODUCT INFORMATION PACKET

Model No: 117701.00

Catalog No: 117701.00

0.50 HP Unit Handling Motor, 1 phase, 1800 RPM, 115/208-230 V, 56HC Frame, TEFC
Unit Handling Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2020 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 6

Product Information Packet: Model No: 117701.00, Catalog No:117701.00 0.50 HP Unit Handling Motor, 1 phase, 1800 RPM, 115/208-230 V, 56HC
Frame, TEFC

Nameplate Specifications

Output HP 0.50 Hp Output KW 0.37 kW
Frequency 60 Hz Voltage 115/208-230 V
Current 8.8/4.4 A Speed 1725 rpm
Service Factor 1.15 Phase 1
Efficiency 66 % Power Factor 58
Duty Continuous Insulation Class F
Design Code L KVA Code L
Frame 56HC Enclosure Totally Enclosed Fan Cooled
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE N IP Code 43

Technical Specifications

Electrical Type Capacitor Start Induction Run Starting Method Across The Line
Poles 4 Rotation Selective Counterclockwise
Resistance Main 3.4 Ohms Mounting Rigid base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type NEMA 56 Overall Length 12.48 in
Frame Length 7.00 in Shaft Diameter 0.625 in
Shaft Extension 1.88 in Assembly/Box Mounting F3
Connection Drawing 005005.01 Outline Drawing 607-0354-700A

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:14/10/2020

2 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 6

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

125 3.2

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

607-0354

A. KEETHA
02/15/2018

PK

05/23/2018

A

ECO-0136357

OUTLINE CONVERSION PROJECT

OUTLINE

607-0027

56C FRAME TEFC

NOTE:

1) GASKETS THROUG H O U T.

MAXIMUM FACE RUNOUT TO BE .004 T.I.R
MAXIMUM PILOT ECCENTRICITY .004 T .I.R
PERMISSIBLE SHAFT RUNOUT .002 T.I.R

CAP

DASH

"XO"

A 1.53[38.86]
B 2.08[52.83]
C 2.32[58.92]

DASH

NO.

"C" "AD"

700 12.48[316.99] 4.44[112.77]

"C" .06
[1.52]

"AD"

2.06

52.22

1.94

49.18

1.875

47.625

.12

3.05

.06

1.55

1.41

35.81
FULL

DEPTH

6.50

165.10

5.00

127.00

2.84

2.66

72.21

67.64

.34

8.64

.6250
.6245

15.8750

15.8623

4.500

4.497

114.300

114.224

6.52

165.70

1.50

38.10

1.50

38.10

7.65

194.29

.19[4.82] SQ. X 1.38[ 35.05]

KEY

6.50

165.10

4.88

123.95

2.44

61.98

1.22

30.99

3.50

3.44

88.90

87.38

.119

3.023

6.75

171.52

4.01

101.92

5.07

128.82

45° 45°

"XO"

(4) 3/8-16 UNC-2B X .56[14.22] DEEP
ON A Ø5.875[ 149.225]

(3) Ø.88[22.35] KNOCKOUT

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

125 3.2

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

607-0354

A. KEETHA
02/15/2018

PK

05/23/2018

A

ECO-0136357

OUTLINE CONVERSION PROJECT

OUTLINE

607-0027

56C FRAME TEFC

NOTE:

1) GASKETS THROUG H O U T.

MAXIMUM FACE RUNOUT TO BE .004 T.I.R
MAXIMUM PILOT ECCENTRICITY .004 T .I.R
PERMISSIBLE SHAFT RUNOUT .002 T.I.R

CAP

DASH

"XO"

A 1.53[38.86]
B 2.08[52.83]
C 2.32[58.92]

DASH

NO.

"C" "AD"

700 12.48[316.99] 4.44[112.77]

Uncontrolled Copy

3 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 6

VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.

ROTATION

LINE LEADS

T1

T6

T5

RBC PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of REGAL BELOIT CORPORATION ("RBC") including
its subsidiaries and divisions and contains proprietary information of RBC. This document
is loaned on the express condition that neither it nor the information contained therein shall
be disclosed to others without the express written consent of RBC, and that the information
shall be used by the recipient only as approved expressly by RBC. This document shall be
returned to RBC upon its request. This document may be subject to certain restrictions
under U.S. export control laws and regulations.

--

REDRAWN IN SOLIDWORKS

27

UPDATED TO CURRENT STANDARDS

26

ADDED PAGE 32 (114787) & PAGE 33 (114788)

25

ADDED PAGE 31

24

ADDED PAGES 29 & 30

23

ADDED PAGE 28

NO

THIRD ANGLE

PROJECTION

2/17/2011 9:21:36 AM

REVISION

T5

VJB
DBT
KAZ
KAZ
KMM
KMM

BY & DATE

02/16/11
05/27/97
12/20/95
04/19/95
03/30/95
01/27/95

T5
T1
T2
T3
T4
T8

TOLERANCES

UNLESS SPECIFIED

DEC

INCHES

.X
.XX
.XXX
.XXXX
ANG

±.1
±.01
±.005
±.0005
±1/2°

PG
DL
DL

CHK
RFP
NETWORK FILE NAME

TITLE

MAT'L
FINISH
PREV

00500501

M

M

S

LEAD END

HIGH

VOLT

LOW

VOLT

EXTERNAL WIRING DIAGRAM
TYPE "C" W/O PROTECTOR
DECAL - 004012

4 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 6

T2
T3

T4

T8

T5 T6

FACING

L1 L2 JOIN

T5

C.C.W. T1 T4,T5 T2,T3,T8

C.W. T1 T4,T8 T2,T3,T5

C.C.W. T1,T3,T8 T2,T4,T5

C.W. T1,T3,T5 T2,T4,T8

DRAWN
CHK
APPR
SCALE
REF
FMF
PAGE

DRAWING NOSIZE REV

A

005005-01

-----

-----

ADH 08/06/73

JCW 03/09/79

1:1

FIG 2-23 C4A
MGI-2.4B

OF

--

Uncontrolled Copy

5 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 6

HZ

4/12/2018

1770

1770

Uncontrolled Copy

LEESON ELECTRIC CORPORATION

TYPICAL PERFORMANCE CURVE for AC MOTOR

Curve at 230 Volts HP 0.50

60 HZ

Model No 117701.00 0.5 HP VOLTS 115/208-230

1

Catalog No 117701.00

60 70 80 90 100

EFF

60 70 80 90 100

PF

HP

60 RPM 1725

Eff −

−

−−

PF −

−

−−

HP −

−

−−

RPM −

−

−−

KW −

−

−−

Amps −

−

−−

1780 1790 1800 1810

0.6 0.7 0.8 0.9 1

RPM

0.6 0.7 0.8 0.9 1

KW

1780 1790 1800 18100.6 0.7 0.8 0.9 13 3.5 4 4.5 5

60 70 80 90 10060 70 80 90 1000.6 0.7 0.8 0.9 1

PF

HP

KW

EFF

RPM

AMPS

0 10 20 30 40 50

0 10 20 30 40 50

0 5 10 15 20 25 30 35

FL TORQUE 24 Oz.Ft FL AMPS 8.8/4.4
BD TORQUE 67.3 Oz.Ft PU TORQUE 64.5 Oz.Ft
LR TORQUE 86.4 Oz.Ft LR AMPS 20.28
WINDING C634257-3 Date

0 0.1 0.2 0.3 0.4 0.5

0 5 10 15 20 25 30 35

0 5 10 15 20 25 30 35

0 0.1 0.2 0.3 0.4 0.5

1710 1720 1730 1740 1750 1760

0 5 10 15 20 25 30 35

Torque

0 10 20 30 40 50

0 10 20 30 40 50

0 0.1 0.2 0.3 0.4 0.5

0 0.1 0.2 0.3 0.4 0.5

0 0.5 1 1.5 2 2.5

1710 1720 1730 1740 1750 1760

0 5 10 15 20 25 30 35

0 5 10 15 20 25 30 35

0 5 10 15 20 25 30 35

0 5 10 15 20 25 30 35

0 5 10 15 20 25 30 35

0 5 10 15 20 25 30 35

0 5 10 15 20 25 30 35

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque in Oz.Ft

6 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 6