Leeson 114227.00 PRODUCT INFORMATION PACKET

PRODUCT INFORMATION PACKET

Model No: 114227.00

Catalog No: 114227.00

0.75 HP Special Voltage Motor, 1 phase, 1500 RPM, 110/220 V, 56H Frame, ODP
50 Hz Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2020 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 6

Product Information Packet: Model No: 114227.00, Catalog No:114227.00 0.75 HP Special Voltage Motor, 1 phase, 1500 RPM, 110/220 V, 56H Frame,
ODP

Nameplate Specifications

Output HP 0.75 Hp Output KW 0.55 kW
Frequency 50 Hz Voltage 110/220 V
Current 11.8/5.9 A Speed 1425 rpm
Service Factor 1.25 Phase 1
Efficiency 68 % Power Factor 66
Duty Continuous Insulation Class B
Design Code NO DESIGN CODE KVA Code J
Frame 56H Enclosure Drip Proof
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE Y IP Code 12

Technical Specifications

Electrical Type Capacitor Start Induction Run Starting Method Across The Line
Poles 4 Rotation Selective Counterclockwise
Resistance Main 0 Ohms Mounting Resilient Base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type NEMA 56 Overall Length 11.81 in
Frame Length 6.00 in Shaft Diameter 0.625 in
Shaft Extension 1.88 in Assembly/Box Mounting F1 ONLY
Outline Drawing 032510-E56 Connection Drawing 005390.01

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:14/10/2020

2 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 6

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

032510

ADH

10-25-1973

C H. ADIKE 2-14-2018

ECO-0143018 PK 4-10-2018

OUTLINE CONVERSION PROJECT

OUTLINE

032510

56 FRAME OPEN DRIP PROOF - RESIL. BASE

FRAME "C" "L" "AD"

C56 10.81 [274.57] 4.69 [119.12] 3.47 [88.13]
D56 11.31 [287.27] 5.19 [131.82] 3.97 [100.83]
E56 11.81 [299.97] 5.69 [144.52] 4.47 [113.53]
F56 12.31 [312.67] 6.19 [157.22] 4.97 [126.23]
G56 12.81 [325.37] 6.69 [169.92] 5.47 [138.93]
H56 13.31 [338.07] 7.19 [182.62] 5.97 [151.63]
J56 13.81 [350.77] 7.69 [195.32] 6.47 [164.33]

"C"

2.00

50.90

1.875

47.625

1.41

35.81
FULL

DEPTH

.13

3.28

"AD"

4.13

104.78

1.50

38.10

1.50

38.10

.50

12.70

.34

8.64

2.75

69.95

.6250
.6245

15.8750

15.8623

"L"

6.53

165.74

1/2-14 NPT

0.19 [4.82] SQ. x 1.38 [35.05]
KEY

6.40

162.56

2.43

61.82

2.43

61.82

1.22

30.99

3.500

3.470

88.900

88.138

6.73

171.01

1.95

49.46

.080

2.032

CAPACITOR CASE

WHEN REQ'D

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

032510

ADH

10-25-1973

C H. ADIKE 2-14-2018

ECO-0143018 PK 4-10-2018

OUTLINE CONVERSION PROJECT

OUTLINE

032510

56 FRAME OPEN DRIP PROOF - RESIL. BASE

FRAME "C" "L" "AD"

C56 10.81 [274.57] 4.69 [119.12] 3.47 [88.13]
D56 11.31 [287.27] 5.19 [131.82] 3.97 [100.83]
E56 11.81 [299.97] 5.69 [144.52] 4.47 [113.53]
F56 12.31 [312.67] 6.19 [157.22] 4.97 [126.23]
G56 12.81 [325.37] 6.69 [169.92] 5.47 [138.93]
H56 13.31 [338.07] 7.19 [182.62] 5.97 [151.63]
J56 13.81 [350.77] 7.69 [195.32] 6.47 [164.33]

Uncontrolled Copy

3 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 6

6/29/2007 2:49:49 PM -

4 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 6

co>rf^+1222?F@MC?sNMB pco^>f^a1222JC2Ktuv

\c^^`.-f,a*,p1222

 2



>]+*pcn>,>n )*c>+\>c*n e-a.*>- /*a.*>-

tKtN tK tKtN tKtN tKtN JHu9N

B@?F B@?F

Huu Huu

-+ c-+

/+,*f^an

POLYREX EM

a*+,n+ n],b>.>0)+ n)+\f,r.-+ n)+\f,r.c-+

>]+*pck)*c>+\>c*n

-+./*,\z+>

9Ht3HL3 9Ht3HL3 LN9~u~Nt2H9N {KL~KtHu JHu9N tKtN JHu9N tKtN uN2s2uNN9Kt2NtHINu

>0)+

.

c-+./*,\z+>

>0)+

.

nco^-.)*+nno*+

xFPB2222ckb> MFPx2A2@BPG CxxP2222ckb>222?2 C?GPC2222ckb>222?2 M@

?2222/, C?2222/, ?P?DM2222r/kb>h ?2222r/kb>h C?2222n+\` ?222 s2222r/n`

.g.b>`

.

nco^-.)ce+* *c>c*.e zh p,`.e zh n,b+.n>,rr.>fp+

b`r`.>c*o+ rc\z+-.*c>c*.,p)n r`*`.>c*o+ /`-`.>c*o+ b`r`.*fn+\

borr.rc,-.+bb122222B gi.rc,-.+bb122222BM Yh.rc,-.+bb122222MDPC

borr.rc,-.)b122222BB gi.rc,-.)b122222MGP Yh.rc,-.)b122222xBPx Bx wH|29HL2~t32Lt

)] ] _cr>n ,p)n n>,*>.>0)+ -o>0 f^nr n`b` ,p/\

C M? CC?A@@? CCPAMPD HwLK992{N2u~tN wKt~tK9 x CP@M x?

FAx ?PMM CM?? Cx@M NMB{ 3| } tK23N9~t2wK3N

^ 2

c 2

> 2

+ 2

n 2

ef^-f^a.q1222wBFx@BM223L22222B2H

]) ye n0^\`.*)p b`r`.*)p b*,p+ +^\rcno*+ z_,.\c-+ -+nfa^

??MFD?P?C

STANDARD 56

2

2

2

2

NONE

pco^>

>0)+

.

.no))r+p+^>,r.f^bc*p,>fc^.

c*f+^>,>fc^

>0)f\,r.pc>c*.)+*bc*p,^\+.-,>,

\+*>fbf\,>fc^.-,>,.n]++>

Uncontrolled Copy

n+_+*+

-o>0

NONE

.

],,*-con

tKtN 2Jsu22222tKtN 2O22222tKtN 2{

f^_+*>+*.>c*o+1222tKtN 2

f^_`.]).n)++-.*,^a+1222tKtN

+^\c-+*1222tKtN 2

tKtN 222222222tKtN 2

tKtN 222222222tKtN 2||L

/*,z+1222tKtN 22222tKtN 2

tKtN 2222222|At2tKtN 2

tKtN 2222222tKtN 2

rc\,>fc^

\,>,rca.q122

>]+*pfn>c*n \c^>*cr n),\+.]+,>+*n

tKtN22_cr>n

1144 STRESSPROOF (C-223)

.

\c_+*

-*f)

p,>+*f,r

n],b>

.

.

n\*++^n ),f^>

ROLLED STEEL

p,>+*f,r

b*,p+

.

a>-`.+bb +r+\`.>0)+

n>,*>n.

]co*

.

pc>c*.ea>

,))*c`

.

114227.00

.

)]`.hjhkgllkmmYZ

.

a*,b>c^d.ef.[gZhi

YZ[Y.\]+0+^^+.,_+`

.

5 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 6

Model No 114227.00

HZ

7/17/2018

1480

1480

Uncontrolled Copy

LEESON ELECTRIC CORPORATION

TYPICAL PERFORMANCE CURVE for AC MOTOR

Curve at 220 Volts HP 0.75

50 HZ

0.75 HP VOLTS 110/220

1

Catalog No 114227.00

60 70 80 90 100

EFF

60 70 80 90 100

PF

HP

50 RPM 1425

Eff −

−

−−

PF −

−

−−

HP −

−

−−

RPM −

−

−−

KW −

−

−−

Amps −

−

−−

1490 1500 1510 1520

0.6 0.7 0.8 0.9 1

RPM

1.2 1.4 1.6 1.8 2

KW

1490 1500 1510 15201.2 1.4 1.6 1.8 26 7 8 9 10

60 70 80 90 10060 70 80 90 1000.6 0.7 0.8 0.9 1

PF

HP

KW

EFF

RPM

AMPS

0 10 20 30 40 50

0 10 20 30 40 50

0 10 20 30 40 50 60

FL TORQUE 43.6 Oz.Ft FL AMPS 11.8/5.9
BD TORQUE 107.1 Oz.Ft PU TORQUE 105.1 Oz.Ft
LR TORQUE 144.8 Oz.Ft LR AMPS 26.7
WINDING C634265-6 Date

0 0.1 0.2 0.3 0.4 0.5

0 10 20 30 40 50 60

0 10 20 30 40 50 60

0 0.2 0.4 0.6 0.8 1

1420 1430 1440 1450 1460 1470

0 10 20 30 40 50 60

Torque

0 10 20 30 40 50

0 10 20 30 40 50

0 0.1 0.2 0.3 0.4 0.5

0 0.2 0.4 0.6 0.8 1

0 1 2 3 4 5

1420 1430 1440 1450 1460 1470

0 10 20 30 40 50 60

0 10 20 30 40 50 60

0 10 20 30 40 50 60

0 10 20 30 40 50 60

0 10 20 30 40 50 60

0 10 20 30 40 50 60

0 10 20 30 40 50 60

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque in Oz.Ft

6 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 6