Leeson 113902.00 PRODUCT INFORMATION PACKET

PRODUCT INFORMATION PACKET

Model No: 113902.00

Catalog No: 113902.00

0.75 HP Special Voltage Motor, 1 phase, 3000 RPM, 110/220 V, 56 Frame, ODP
50 Hz Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2020 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 6

Product Information Packet: Model No: 113902.00, Catalog No:113902.00 0.75 HP Special Voltage Motor, 1 phase, 3000 RPM, 110/220 V, 56 Frame,
ODP

Nameplate Specifications

Output HP 0.75 Hp Output KW 0.56 kW
Frequency 50 Hz Voltage 110/220 V
Current 11.2/5.6 A Speed 2850 rpm
Service Factor 1.25 Phase 1
Efficiency 62 % Power Factor 72
Duty Continuous Insulation Class B
Design Code L KVA Code K
Frame 56 Enclosure Drip Proof
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE Y IP Code 22

Technical Specifications

Electrical Type Capacitor Start Induction Run Starting Method Across The Line
Poles 2 Rotation Selective Counterclockwise
Resistance Main 2.84 Ohms Mounting Rigid base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type NEMA 56 Overall Length 10.34 in
Frame Length 5.50 in Shaft Diameter 0.625 in
Shaft Extension 1.88 in Assembly/Box Mounting F1 ONLY
Outline Drawing 028601-550B Connection Drawing 005390.01

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:14/10/2020

2 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 6

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

125 3.2

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

028601

RDW

7/1/04

SW

7/1/04

C A.SUPPANNAVAR 12/21/2017

ECO-0143018 PK 04/10/2018

OUTLINE CONVERSION PROJECT

OUTLINE

028601

56-FRAME DRIP PROOF -RIGID

NAMEPLATE

CAP

DASH.

"XO"

A 1.48 [37.59]
B 1.94 [49.28]
C 2.19 [55.62]

DASH

NO.

"C" "AD"

500 9.87 [250.70] 4.38 [111.25]
550 10.37 [263.40] 4.88 [123.95]
600 10.87 [276.10] 5.38 [136.65]
650 11.37 [288.80] 5.88 [149.35]
700 11.87 [301.50] 6.38 [162.05]

2.75±.09

69.92±2.29

3.00

76.20

.34

8.64

3.75

95.25

1.95

49.43

1.41

35.81
FULL

DEPTH

1.875

47.625

.07

1.80

"AD"

"C" .06

[" 1.52]

6.52

165.70

.6250
.6245

15.8750

15.8623

(1) 1/2-14 NPT

(PLUGGED)

.19 [4.82] SQ
X 1.38 [35.05] KEY

4.88

123.95

6.50

165.10

1.22

30.99

2.44

61.98

6.74

171.26

3.50

3.44

88.90

87.38

.119

3.023

"XO"

DECAL
CONNECTION
UNDER COVER
(WHEN REQ'D)

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

125 3.2

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

028601

RDW

7/1/04

SW

7/1/04

C A.SUPPANNAVAR 12/21/2017

ECO-0143018 PK 04/10/2018

OUTLINE CONVERSION PROJECT

OUTLINE

028601

56-FRAME DRIP PROOF -RIGID

NAMEPLATE

CAP

DASH.

"XO"

A 1.48 [37.59]
B 1.94 [49.28]
C 2.19 [55.62]

DASH

NO.

"C" "AD"

500 9.87 [250.70] 4.38 [111.25]
550 10.37 [263.40] 4.88 [123.95]
600 10.87 [276.10] 5.38 [136.65]
650 11.37 [288.80] 5.88 [149.35]
700 11.87 [301.50] 6.38 [162.05]

Uncontrolled Copy

3 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 6

6/29/2007 2:49:49 PM -

4 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 6

Uncontrolled Copy

5 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 6

Model No 113902.00

HZ

3/12/2019

50

EFF

50

PF

0.5

HP

2920

RPM

1

KW

50

EFF

50

PF

0.5

HP

2920

RPM

1

KW

5

AMPS

Uncontrolled Copy

LEESON ELECTRIC CORPORATION

TYPICAL PERFORMANCE CURVE for AC MOTOR

Curve at 220 Volts HP 0.75

50 HZ

0.75 HP VOLTS 110/220

1

Catalog No 113902.00

60 70 80 90 100

60 70 80 90 100

50 RPM 2850

Eff −

−

−−

PF −

−

−−

HP −

−

−−

RPM −

−

−−

KW −

−

−−

Amps −

−

−−

6 7 8 9 10

60 70 80 90 100

0.6 0.7 0.8 0.9 1

1.2 1.4 1.6 1.8 2

2940 2960 2980 3000 3020

60 70 80 90 100

0.6 0.7 0.8 0.9 1

1.2 1.4 1.6 1.8 2
2940 2960 2980 3000 3020

0 10 20 30 40

0 10 20 30 40

0 5 10 15 20 25 30

0 0.1 0.2 0.3 0.4

0 5 10 15 20 25 30

0 5 10 15 20 25 30

0 0.2 0.4 0.6 0.8

2820 2840 2860 2880 2900

0 5 10 15 20 25 30

Torque

0 10 20 30 40

0 10 20 30 40

0 0.1 0.2 0.3 0.4

0 0.2 0.4 0.6 0.8

0 1 2 3 4

2820 2840 2860 2880 2900

0 5 10 15 20 25 30

0 5 10 15 20 25 30

0 5 10 15 20 25 30

0 5 10 15 20 25 30

0 5 10 15 20 25 30

0 5 10 15 20 25 30

0 5 10 15 20 25 30

Torque

Torque

Torque

Torque

FL TORQUE 21.9 Oz.Ft FL AMPS 11.2/5.6
BD TORQUE 64.0 Oz.Ft PU TORQUE 51.0 Oz.Ft
LR TORQUE 64 Oz.Ft LR AMPS 29.2
WINDING C632227-5 Date

Torque

Torque

Torque

Torque

Torque

Torque

Torque in Oz.Ft

6 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 6