Leeson 110396.00 PRODUCT INFORMATION PACKET

PRODUCT INFORMATION PACKET

Model No: 110396.00

Catalog No: 110396.00

0.75 HP Special Voltage Motor, 1 phase, 1500 RPM, 110/220 V, 56 Frame, ODP 50 Hz Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 6

Product Information Packet: Model No: 110396.00, Catalog No:110396.00 0.75 HP Special Voltage Motor, 1 phase, 1500 RPM, 110/220 V, 56 Frame, ODP

Nameplate Specifications

Output HP 0.75 Hp Output KW 0.56 kW Frequency 50 Hz Voltage 110/220 V Current 11.8/5.9 A Speed 1425 rpm Service Factor 1.25 Phase 1 Efficiency 68 % Power Factor 66 Duty Continuous Insulation Class B Design Code NO DESIGN CODE KVA Code J Frame 56 Enclosure Drip Proof Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203 UL Recognized CSA Y CE Y IP Code 22

Technical Specifications

Electrical Type Capacitor Start Induction Run Starting Method Across The Line Poles 4 Rotation Selective Counterclockwise Resistance Main 0 Ohms Mounting Rigid base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type NEMA 56 Overall Length 10.84 in Frame Length 6.00 in Shaft Diameter 0.625 in Shaft Extension 1.88 in Assembly/Box Mounting F1 ONLY Connection Drawing 005390.01 Outline Drawing 028601-600B

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:14/10/2020

2 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 6

Regal Beloit America, Inc.

TM

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 0.5 .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

125 3.2

INCH mm mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

028601

RDW

7/1/04

SW

7/1/04

C A.SUPPANNAVAR 12/21/2017

ECO-0143018 PK 04/10/2018

OUTLINE CONVERSION PROJECT

OUTLINE

028601

56-FRAME DRIP PROOF -RIGID

NAMEPLATE

CAP

DASH.

"XO"

A 1.48 [37.59] B 1.94 [49.28] C 2.19 [55.62]

DASH

NO.

"C" "AD"

500 9.87 [250.70] 4.38 [111.25] 550 10.37 [263.40] 4.88 [123.95] 600 10.87 [276.10] 5.38 [136.65] 650 11.37 [288.80] 5.88 [149.35] 700 11.87 [301.50] 6.38 [162.05]

2.75±.09

69.92±2.29

3.00

76.20

.34

8.64

3.75

95.25

1.95

49.43

1.41

35.81 FULL

DEPTH

1.875

47.625

.07

1.80

"AD"

"C" .06

[" 1.52]

6.52

165.70

.6250 .6245

15.8750

15.8623

(1) 1/2-14 NPT

(PLUGGED)

.19 [4.82] SQ X 1.38 [35.05] KEY

4.88

123.95

6.50

165.10

1.22

30.99

2.44

61.98

6.74

171.26

3.50

3.44

88.90

87.38

.119

3.023

"XO"

DECAL CONNECTION UNDER COVER (WHEN REQ'D)

Regal Beloit America, Inc.

TM

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 0.5 .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

125 3.2

INCH mm mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

028601

RDW

7/1/04

SW

7/1/04

C A.SUPPANNAVAR 12/21/2017

ECO-0143018 PK 04/10/2018

OUTLINE CONVERSION PROJECT

OUTLINE

028601

56-FRAME DRIP PROOF -RIGID

NAMEPLATE

CAP

DASH.

"XO"

A 1.48 [37.59] B 1.94 [49.28] C 2.19 [55.62]

DASH

NO.

"C" "AD"

500 9.87 [250.70] 4.38 [111.25] 550 10.37 [263.40] 4.88 [123.95] 600 10.87 [276.10] 5.38 [136.65] 650 11.37 [288.80] 5.88 [149.35] 700 11.87 [301.50] 6.38 [162.05]

Uncontrolled Copy

3 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 6

6/29/2007 2:49:49 PM -

4 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 6

Uncontrolled Copy

5 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 6

HZ

4/23/2018

1480

Uncontrolled Copy

LEESON ELECTRIC CORPORATION

TYPICAL PERFORMANCE CURVE for AC MOTOR

Curve at 220 Volts HP 0.75

50 HZ

Model No 110396.00 0.75 HP VOLTS 110/220

1

Catalog No 110396.00

60 70 80 90 100

EFF

60 70 80 90 100

PF

HP

50 RPM 1425

Eff −

−

−−

PF −

−

−−

HP −

−

−−

RPM −

−

−−

KW −

−

−−

Amps −

−

−−

1490 1500 1510 1520

0.6 0.7 0.8 0.9 1

RPM

1.2 1.4 1.6 1.8 2

KW

1490 1500 1510 15201.2 1.4 1.6 1.8 26 7 8 9 10

60 70 80 90 10060 70 80 90 1000.6 0.7 0.8 0.9 1

PF

HP

KW

EFF

RPM

AMPS

0 10 20 30 40 50

0 10 20 30 40 50 60

FL TORQUE 43.6 Oz.Ft FL AMPS 11.8/5.9 BD TORQUE 107.1 Oz.Ft PU TORQUE 105.1 Oz.Ft LR TORQUE 144.8 Oz.Ft LR AMPS 26.7 WINDING C634265-6 Date

0 0.1 0.2 0.3 0.4 0.5

0 10 20 30 40 50 60

0 0.2 0.4 0.6 0.8 1

1420 1430 1440 1450 1460 1470

0 10 20 30 40 50 60

Torque

0 10 20 30 40 50

0 0.1 0.2 0.3 0.4 0.5

0 0.2 0.4 0.6 0.8 1

0 1 2 3 4 5

1420 1430 1440 1450 1460 1470

0 10 20 30 40 50 60

Torque

Torque in Oz.Ft

6 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 6

Leeson 110396.00 PRODUCT INFORMATION PACKET

Specifications and Main Features

Frequently Asked Questions

User Manual