PRODUCT INFORMATION PACKET
Model No: C4T17DK9A
Catalog No: 103021.00
Obsolete in the US, replaced by E103021.00 -
1/3HP..1725RPM.48.DP.230/460V.3PH.60HZ.CONT.40C.1.25SF.RIGID.C4T17DK9A.....WATTSAVER.AUTO
MATIC....0.25kW...
Open Drip Proof (ODP)
Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.
©2018 Regal Beloit Corporation, All Rights Reserved. MC017097E
1 of 5
Product Information Packet: Model No: C4T17DK9A, Catalog No:103021.00 Obsolete in the US, replaced by
E103021.00 -
1/3HP..1725RPM.48.DP.230/460V.3PH.60HZ.CONT.40C.1.25SF.RIGID.C4T17DK9A.....WATTSAVER.AUTOMATIC...
.0.25kW...
Nameplate Specifications
Output HP
Frequency 60 Hz Voltage 230/460 V
Current
Service Factor
Efficiency 77 % Duty Continuous
Insulation Class
KVA Code M Frame S56C
Enclosure Drip Proof Overload Protector Automatic
Ambient Temperature
Opp Drive End Bearing Size 6203 UL Recognized
CSA
IP Code
0.33 Hp
1.3/0.65 A
1.25
F
40 °C
Y
22
Output KW
Speed
Phase
Design Code
Drive End Bearing Size
CE
0.25 kW
1725 rpm
3
NO DESIGN CODE
6203
Y
Technical Specifications
Electrical Type
Poles 4 Rotation Reversible
Squirrel Cage Induction Run
Starting Method
Across The Line
Mounting
Drive End Bearing BALL Opp Drive End Bearing BALL
Frame Material Rolled Steel Shaft Type NEMA 56
Overall Length
Shaft Diameter 0.625 in Shaft Extension 1.88 in
Assembly/Box Mounting
Outline Drawing
Rigid base
10.24 in
F1 ONLY
031629-625
Motor Orientation
Frame Length
Connection Diagram
HORIZONTAL
6.25 in
005010.20
This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created: 10/15/2018
2 of 5
Uncontrolled Copy
3 of 5
VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.
VIEW FROM OUTSIDE OF MOTOR AT SWITCH END.
TSTAT(S)
TSTAT(S)
Uncontrolled Copy
T1
T1
T2
T2
T3
T3
T4
T4
T5
T5
T6
T6
T7
T7
T8
T8
T9
T9
RED(P1)
RED(P1)
RED(P2)
RED(P2)
T9
T9
T3
T3
LINE LEADS
LINE LEADS
T1
T1
T7
T7
T4
T4
T5
T5
T6
T6
T8
T8
T2
T2
DATE
REVISION BY
DRAWING REVISION
DRAWING REVISION
ECO
ECO
ECO DESCRIPTION
ECO DESCRIPTION
G
G
ECO-0121253
ECO-0121253
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
REVISION BY
APPROVED BY
APPROVED BY
ADDED P1 & P2 FOR TSTAT
ADDED P1 & P2 FOR TSTAT
MVG
MVG
SM
SM
DATE
04/05/2017
04/05/2017
DATE
DATE
04/05/2017
04/05/2017
TOLERANCES UNLESS
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
OTHERWISE SPECIFIED:
DEC.
DEC.
INCH mm ANGLE
INCH mm ANGLE
.X 0.1 [ 2.5] 0.5
.X 0.1 [ 2.5] 0.5
.XX 0.01 [ 0.25]
.XX 0.01 [ 0.25]
.XXX 0.005 [ 0.127]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
MACHINED SURFACES:
INCH mm
INCH mm
mm SHOWN IN [BRACKETS]
mm SHOWN IN [BRACKETS]
125 3.2
125 3.2
DRAWN BY
DRAWN BY
DBT 12/16/97
DBT 12/16/97
DATE
DATE
APPROVED BY
APPROVED BY
KH 12/17/97
KH 12/17/97
DATE
DATE
REFERENCE
REFERENCE
THIRD ANGLE
THIRD ANGLE
PROJECTION
PROJECTION
VOLTAGE L1 L2 L3 JOIN & INSULATE
VOLTAGE L1 L2 L3 JOIN & INSULATE
(T4,T7)
(T4,T7)
HIGH T1 T2 T3
HIGH T1 T2 T3
LOW T1,T7 T2,T8 T3,T9 T4,T5,T6
LOW T1,T7 T2,T8 T3,T9 T4,T5,T6
TM
TM
Regal Beloit America, Inc.
Regal Beloit America, Inc.
DESCRIPTION
DESCRIPTION
CONN DIAGRAM-EXTERNAL
CONN DIAGRAM-EXTERNAL
3 PHASE WITH PROTECTOR
3 PHASE WITH PROTECTOR
MATERIAL
MATERIAL
DECAL - 004014 (TSTAT) - 080582
DECAL - 004014 (TSTAT) - 080582
SIZE DRAWING NUMBER
SIZE DRAWING NUMBER
00501020
A
A
00501020
PROCESS/FINISH
PROCESS/FINISH
(T5,T8)
(T5,T8)
(T6,T9)
(T6,T9)
STOCK
STOCK
SHEET
SHEET
1 OF 1
1 OF 1
4 of 5
Curve at
Volts
HP
HZ
Model No
HP
VOLTS
Catalog No
103021.00
HZ
60&50
RPM
1725&1425
Torque in Oz.Ft
FL TORQUE
Oz.Ft
FL AMPS
BD TORQUE
Oz.Ft
PU TORQUE
Oz.Ft
LR TORQUE
78.6
Oz.Ft
LR AMPS
4.62
WINDING
TE48462-3
Date
5/21/2018
Uncontrolled Copy
LEESON ELECTRIC CORPORATION
TYPICAL PERFORMANCE CURVE for AC MOTOR
460
60
103021.00 0.33
0.33&0.33
230/460&190/380
Eff −
−
−−
PF −
−
−−
HP −
−
−−
RPM −
−
−−
KW −
−
−−
Amps −
−
−−
3
60 70 80 90 100
EFF
0 10 20 30 40 50
60 70 80 90 100
PF
0 10 20 30 40 50
0 5 10 15 20 25
0.3 0.35 0.4 0.45 0.5
HP
RPM
0 0.05 0.1 0.15 0.2 0.25
0 5 10 15 20 25
0 5 10 15 20 25
16
90.4
0.3 0.35 0.4 0.45 0.5
1790 1800 1810 1820 1830
KW
0 0.05 0.1 0.15 0.2 0.25
1730 1740 1750 1760 1770 1780
0 5 10 15 20 25
Torque
60 70 80 90 10060 70 80 90 1000.3 0.35 0.4 0.45 0.51790 1800 1810 1820 18300.3 0.35 0.4 0.45 0.50.6 0.7 0.8 0.9 1
PF
HP
KW
EFF
RPM
AMPS
0 10 20 30 40 50
0 10 20 30 40 50
0 0.05 0.1 0.15 0.2 0.25
0 0.05 0.1 0.15 0.2 0.25
0 0.1 0.2 0.3 0.4 0.5
1730 1740 1750 1760 1770 1780
0 5 10 15 20 25
0 5 10 15 20 25
0 5 10 15 20 25
0 5 10 15 20 25
0 5 10 15 20 25
0 5 10 15 20 25
0 5 10 15 20 25
Torque
Torque
Torque
Torque
Torque
Torque
Torque
Torque
Torque
Torque
1.3/.65
76.3
5 of 5
Loading...